Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 113
14.3.3.9 UPC/EAN Shared Settings
Decoded Scanner
These settings apply to an internal decoded scanner using UPC/EAN symbologies.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Intermec ISCP Imager
These settings apply only to the Intermec ISCP imager acting as a decoded scanner using
UPC/EAN symbologies.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
•Tab
Barcodes
• Scanner:
Decoded (internal)
• Menu Item
UPC/EAN Shared Settings
Scanner Setting Key: Barcode\UPC_EAN\Decoded
Scanner Setting Name Minimum Maximum Default Control Panel Name
Bookland Enabled 0 = off 1 = on 0 Enable Bookland EAN
Supplementals 0 2 0 Supplementals
Supplemental Redundancy 2 20 20 Supp. Redundancy
Security Level 0 3 0 Security Level
Linear Decode 0 = off 1 = on 0 Linear Decode
UPC Half Block Stitching 0 = off 1 = on 1 UPC Half Block Stitching
•Tab
Barcodes
• Scanner:
Decoded (Intermec ISCP)
• Menu Item
UPC/EAN Shared Settings
Scanner Setting Key: Barcode\UPC_EAN\ICSP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Addendum 0 1 0 Addendum
Addendum Add-on 2 0 = off 1 = on 0 Addendum Add-on 2
Addendum Add-on 5 0 = off 1 = on 0 Addendum Add-on 5
Addendum Security 0 100 10 Addendum Security
GTIN Compliant 0 = off 1 = on 0 GTIN Compliant