Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
114 Psion Teklogix Mobile Devices SDK Developers Guide
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using UPC/EAN
symbologies.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.10Codabar Settings
Decoded Scanner
These settings apply to an internal decoded scanner using the Codabar symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Non-decoded Scanner
These settings apply to an internal or external non-decoded scanner using the Codabar symbology.
•Tab
Barcodes
•Scanner:
Decoded (HHP)
• Menu Item
UPC/EAN
Scanner Setting Key: Barcode\UPC_EAN\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
UPC-A EAN-13 Extended
Coupon Code
0 = off 1 = on 1 Extended Coupon Code
•Tab
Barcodes
•Scanner:
Decoded (internal)
• Menu Item
Codabar
Scanner Setting Key: Barcode\CDB\Decoded
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Length L1 0 55 5 Set Length L1
Length L2 0 55 55 Set Length L2
CLSI Editing 0 = off 1 = on 0 CLSI Editing
NOTIS Editing 0 = off 1 = on 0 NOTIS Editing