Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 115
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Scanner Setting Key: Barcode\CDB
Imager (Deprecated)
These settings apply to an internal imager scanner using the Codabar symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Intermec ISCP Imager
These settings apply only to the Intermec ISCP imager acting as a decoded scanner using the
Codabar symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
•Tab
Barcodes
• Scanner:
Non-decoded
• Menu Item
Codabar
Scanner Setting Key: Barcode\CDB
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
StartStopChars 0 = off 1 = on 1 Strip Start/Stop Chars
Tra n s m it Code ID
Character
0 = off 1 = on 0 Transmit Code ID Char
•Tab
Barcodes
• Scanner:
Imager
• Menu Item
Codabar
Scanner Setting Key: Barcode\CDB\Imager
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
•Tab
Barcodes
• Scanner:
Decoded (Intermec ISCP)
• Menu Item
Codabar