Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 119
14.3.3.12Code 11 Settings
Non-decoded Scanner
These settings apply to an internal or external non-decoded scanner using the Code 11 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Intermec ISCP Imager
These settings apply only to the Intermec ISCP imager acting as a decoded scanner using the Code
11 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
•Tab
Barcodes
• Scanner:
Non-decoded
• Menu Item
Code 11
Scanner Setting Key: Barcode\C11
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Include Chk 0 = off 1 = on 0 Include Check
Num Chk Digits 0 2 0 Check Digits
Tra n s m it Code ID
Character
0 = off 1 = on 0 Transmit Code ID Char
•Tab
Barcodes
• Scanner:
Decoded (Intermec ISCP)
• Menu Item
Code 11
Scanner Setting Key: Barcode\C11\ICSP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Check Digit Verification 1 2 2 Check Digit Verification
Transmit Check Digit 0 = off 1 = on 1 Transmit Check Digit
Length L1 0 255 0 Minimum Length