Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
120 Psion Teklogix Mobile Devices SDK Developers Guide
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the Code 11
symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.13Interleaved 2 of 5 Settings
Non-decoded Scanner
These settings apply to an internal or external non-decoded scanner using the Interleaved 2 of 5
symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
•Tab
Barcodes
•Scanner:
Decoded (HHP)
• Menu Item
Code 11
Scanner Setting Key: Barcode\C11\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Check Digits Required 0 1 1 Check Digits
Length Min 1 80 4 Minimum Length
Length Max 1 80 80 Maximum Length
•Tab
Barcodes
•Scanner:
Non-decoded
• Menu Item
Interleaved 2 of 5
Scanner Setting Key: Barcode\I25
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Mod Chk Base 0 = off 1 = on 0 MOD 10 Check
ItfChk 0 = off 1 = on 0 ITF Check
Include Chk 0 = off 1 = on 0 Include Check
Tran s m i t C o d e ID
Character
0 = off 1 = on 0 Transmit Code ID Char