Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 125
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.15Matrix 2 of 5 Settings
Intermec ISCP Imager
These settings apply only to the Intermec ISCP imager acting as a decoded scanner using the
Matrix 2 of 5 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the Matrix 2 of 5
symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
Scanner Setting Key: Barcode\MSI\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Enabled Plessey 0 = off 1 = on 0 Enable Plessey
Check Char 0 1 0 Check Char
Length Min 4 48 4 Minimum Length
Length Max 4 48 48 Maximum Length
Plessey Length Min 4 48 4 Plessey Minimum Length
Plessey Length Max 4 48 48 Plessey Maximum Length
•Tab
Barcodes
• Scanner:
Decoded (Intermec ISCP)
• Menu Item
Matrix 2 of 5
Scanner Setting Key: Barcode\Matrix25\ICSP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Length L1 0 255 6 Set Length L1
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
Matrix 2 of 5