Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 127
SDK:
These settings can be changed and queried through the SDK as follows:
Scanner Setting Key: Barcode\D25\Decoded
Intermec ISCP Imager
These settings apply only to the Intermec ISCP imager acting as a decoded scanner using the Dis-
crete 2 of 5 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the Discrete 2 of 5
symbology.
Scanner Setting Key: Barcode\D25\Decoded
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Length L1 0 12 12 Set Length L1
Length L2 0 12 0 Set Length L2
•Tab
Barcodes
• Scanner:
Decoded (Intermec ISCP)
• Menu Item
Discrete 2 of 5
Scanner Setting Key: Barcode\D25\ICSP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Standard 2 of 5 Format 0 1 0 Standard 2 of 5 Format
Check Digit Verification 0 1 0 Check Digit Verification
Transmit Check Digit 0 = off 1 = on 0 Transmit Check Digit
Length L1 0 255 6 Set Length L1
Length L2 0 255 0 Set Length L2
Length L3 0 255 0 Set Length L3
Length Mode 0 1 0 Length Mode