Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 129
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.18Telepen Settings
Intermec ISCP Imager
These settings apply only to the Intermec ISCP imager acting as a decoded scanner using the
Telepen symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the Telepen
symbology.
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
IATA 2 of 5
Scanner Setting Key: Barcode\IATA25\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Length Min 1 48 4 Minimum Length
Length Max 1 48 48 Maximum Length
•Tab
Barcodes
• Scanner:
Decoded (Intermec ISCP)
• Menu Item
Telepen
Scanner Setting Key: Barcode\Telepen\ICSP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Format 0 1 0 Format
Length L1 0 255 0 Set Length L1