Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
130 Psion Teklogix Mobile Devices SDK Developers Guide
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.19RSS Code Settings
Decoded Scanner
These settings apply to an internal decoded scanner using the RSS Code symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Imager (Deprecated)
These settings apply to an internal imager scanner using the RSS Code symbology.
•Tab
Barcodes
•Scanner:
Decoded (HHP)
• Menu Item
Telepen
Scanner Setting Key: Barcode\Telepen\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Output 0 1 0 Output
Length Min 1 60 1 Minimum Length
Length Max 1 60 60 Maximum Length
•Tab
Barcodes
•Scanner:
Decoded (internal)
• Menu Item
RSS Code
Scanner Setting Key: Barcode\RSSCode\Decoded
Scanner Setting Name Minimum Maximum Default Control Panel Name
RSS-14 Enabled 0 = off 1 = on 0 Enable RSS-14
RSS Limited Enabled 0 = off 1 = on 0 Enable RSS Limited
RSS Expanded Enabled 0 = off 1 = on 0 Enable RSS Expanded