Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 131
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Scanner Setting Key: Barcode\RSSCode\Imager
Intermec ISCP Imager
These settings apply only to the Intermec ISCP imager acting as a decoded scanner using the RSS
Code symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the RSS Code
symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
•Tab
Barcodes
• Scanner:
Imager
• Menu Item
RSS Code
Scanner Setting Key: Barcode\RSSCode\Imager
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
•Tab
Barcodes
• Scanner:
Decoded (Intermec ISCP)
• Menu Item
RSS Code
Scanner Setting Key: Barcode\RSSCode\ICSP
Scanner Setting Name Minimum Maximum Default Control Panel Name
RSS-14 Enabled 0 = off 1 = on 0 Enable RSS-14
RSS Limited Enabled 0 = off 1 = on 0 Enable RSS Limited
RSS Expanded Enabled 0 = off 1 = on 0 Enable RSS Expanded
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
RSS Code