Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 132
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.20PosiCode Settings
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the PosiCode
symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.21Composite Settings
Decoded Scanner
These settings apply to an internal decoded scanner using the Composite Code symbology
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
Scanner Setting Key: Barcode\RSSCode\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
RSS Limited Enabled 0 = off 1 = on 1 Enable RSS Limited
RSS Expanded Enabled 0 = off 1 = on 1 Enable RSS Expanded
RSS Expanded Length Min 4 74 4 Minimum Length
RSS Expanded Length Max 4 74 74 Maximum Length
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
PosiCode
Scanner Setting Key: Barcode\PosiCode\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Posicode 0 2 2 PosiCode
Length Min 2 80 4 Minimum Length
Length Max 2 80 48 Maximum Length
•Tab
Barcodes
• Scanner:
Decoded (internal)
• Menu Item
Composite