Developers guide

Chapter 14: Scanners

Configuring Bar Code Symbologies

Psion Teklogix Mobile Devices SDK Developers Guide 133

SDK:

These settings can be changed and queried through the SDK as follows:

Imager (Deprecated)

These settings apply to an internal imager scanner using the Composite Code symbology.

Control Panel:

These settings are changed through the Control Panel Scanner Properties as follows:

SDK:

These settings can be changed and queried through the SDK as follows:

Intermec ISCP Imager

These settings apply only to the Intermec ISCP imager acting as a decoded scanner using the

Composite symbology.

Control Panel:

These settings are changed through the Control Panel Scanner Properties as follows:

Scanner Setting Key: Barcode\Composite\Decoded

Scanner Setting Name Minimum Maximum Default Control Panel Name

CC-C Enabled 0 = off 1 = on 0 Enable CC-C

CC-AB Enabled 0 = off 1 = on 0 Enable CC-AB

TLC-39 Enabled 0 = off 1 = on 0 Enable TLC-39

•Tab

Barcodes

• Scanner:

Imager

• Menu Item

Composite

Scanner Setting Key: Barcode\Composite\Imager