Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 134
SDK:
These settings can be changed and queried through the SDK as follows:
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the Composite
symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.22TLC-39 Settings
Intermec ISCP Imager
These settings apply only to the Intermec ISCP imager acting as a decoded scanner using the
TLC-39 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
Scanner Setting Key: Barcode\Composite\ICSP
Scanner Setting Name Minimum Maximum Default Control Panel Name
CC-A/B Enabled 0 = off 1 = on 0 Enable CC-AB
CC-C Enabled 0 = off 1 = on 0 Enable CC-C
Linear Transmission only 0 = off 1 = on 0 Linear Transmission only
UPC and EAN composite
message decoding
0 2 2 UPC-EAN composite
message decoding
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
Composite
Scanner Setting Key: Barcode\Composite\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
EAN-UCC Composite
Enabled
0 = off 1 = on 0 GS1 128
EAN-UCC Emulation 0 = off 1 = on 0 EAN/UCC 128 Emulation
Length Min 1 2435 1 Minimum Length
Length Max 1 2435 2435 Maximum Length
•Tab
Barcodes
• Scanner:
Decoded (Intermec ISCP)
• Menu Item
TLC-39