Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 138
Intermec ISCP Imager
These settings apply only to the Intermec ISCP imager acting as a decoded scanner using the
micro PDF417 symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the micro PDF417
symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.25Code 16K Settings
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the Code 16K
symbology.
•Tab
Barcodes
• Scanner:
Decoded (Intermec ISCP)
• Menu Item
micro PDF-417
Scanner Setting Key: Barcode\MicroPDF417\ICSP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Code 128 Emulation 0 = off 1 = on 0 Code 128 Emulation
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
micro PDF-417
Scanner Setting Key: Barcode\MicroPDF417\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Length Min 1 366 1 Minimum Length
Length Max 1 366 366 Maximum Length