Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 140
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the Codablock
symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.282D Data Matrix Settings
Imager (Deprecated)
These settings apply to an internal imager scanner using the 2D Data Matrix symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
•Tab
Barcodes
• Scanner:
Decoded (Intermec ISCP)
• Menu Item
Codablock
Scanner Setting Key: Barcode\Codablock\ICSP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Codablock A Enabled 0 = off 1 = on 0 Enable Codablock A
Codablock F Enabled 0 = off 1 = on 0 Enable Codablock F
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
Codablock
Scanner Setting Key: Barcode\Codablock\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
Length Min 1 2048 1 Minimum Length
Length Max 1 2048 2048 Maximum Length
•Tab
Barcodes
• Scanner:
Imager
• Menu Item
2D Data Matrix