Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 142
SDK:
These settings can be changed and queried through the SDK as follows:
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the 2D QR Code
symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.302D MaxiCode Settings
Imager (Deprecated)
These settings apply to an internal imager scanner using the 2D MaxiCode symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
Scanner Setting Key: Barcode\QRCode\Imager
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Inverse Video Mode 0 = off 1 = on 0 Inverse Video Mode
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
2D QR Code
Scanner Setting Key: Barcode\QRCode\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Length Min 1 3000 1 Minimum Length
Length Max 1 3000 3000 Maximum Length
•Tab
Barcodes
• Scanner:
Imager
• Menu Item
2D Maxicode
Scanner Setting Key: Barcode\MaxiCode\Imager
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled