Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 143
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the 2D MaxiCode
symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.312D Aztec Settings
Imager (Deprecated)
These settings apply to an internal imager scanner using the 2D Aztec Code symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the 2D Aztec
symbology.
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
2D Maxicode
Scanner Setting Key: Barcode\MaxiCode\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 1 Enabled
Length Min 1 150 1 Minimum Length
Length Max 1 150 150 Maximum Length
•Tab
Barcodes
• Scanner:
Imager
• Menu Item
2D Aztec
Scanner Setting Key: Barcode\Aztec\Imager
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled