Developers guide

Chapter 14: Scanners
Configuring Bar Code Symbologies
Psion Teklogix Mobile Devices SDK Developers Guide 148
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.3.3.37Postal: Kix Settings
Imager (Deprecated)
These settings apply to an internal imager scanner using the Netherlands Postal Address
symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the Netherlands
Postal Address symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
Postal: Japanese
Scanner Setting Key: Barcode\PostalJap\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
•Tab
Barcodes
• Scanner:
Imager
• Menu Item
Postal: Kix
Scanner Setting Key: Barcode\PostalKix\Imager
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
Postal: Kix