Developers guide

Chapter 14: Scanners
Reading Bar Codes
Psion Teklogix Mobile Devices SDK Developers Guide 150
14.3.3.39Postal: Royal Settings
Imager (Deprecated)
These settings apply to an internal imager scanner using the Royal Mail Postal symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
HHP Imager
These settings apply only to the HHP imager acting as a decoded scanner using the Royal Mail
Postal Address symbology.
Control Panel:
These settings are changed through the Control Panel Scanner Properties as follows:
SDK:
These settings can be changed and queried through the SDK as follows:
14.4 Reading Bar Codes
14.4.1 Initiating A Bar Code Scan
A bar code scan is initiated for an internal scanner by one of the following:
• Pressing the keyboard key that is configured as the scanner trigger.
• Using the Scan method, in the Scanner API, of the Mobile Devices SDK.
A bar code scan is initiated for an external scanner as follows:
• Pressing the trigger on the pistol grip of the external scanner.
•Tab
Barcodes
• Scanner:
Imager
• Menu Item
Postal: Royal
Scanner Setting Key: Barcode\PostalRoyal\Imager
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled
•Tab
Barcodes
• Scanner:
Decoded (HHP)
• Menu Item
Postal: Royal
Scanner Setting Key: Barcode\PostalRoyal\HHP
Scanner Setting Name Minimum Maximum Default Control Panel Name
Enabled 0 = off 1 = on 0 Enabled