User manual

Chapter 3: Getting To Know Your 7535 G2
Numeric Keyboard: 36-Key
Psion Teklogix 7535 G2 Hand-Held Computer User Manual 49
To choose the letter ‘b’:
• Press the [ORANGE] key, and press [2] twice.
• Press the [ORANGE] key again to unlock or turn it off.
To choose the letter ‘c’:
• Press the [ORANGE] key, and press [2] three times.
• Press the [ORANGE] key again to unlock or turn it off.
Creating Uppercase Letters
To display a capital letter:
• Press the [ORANGE] key and then the [SHIFT] key before typing the alpha character.
Choosing Multiple Characters From The Same Key
If you need to choose more than one alpha character from a single key, you’ll need to press
the Accept key between alpha selections. The Accept key is presented as an arrow Þ symbol
above the 0 (zero) key.
For example, suppose you want to type the letters ‘a’, ‘b’ and ‘c’. These letters are all acces-
sible from the numeric key, [2].
To type the letter ‘a’:
• Press the [ORANGE] key, and then press the numeric key, [2].
• Press the Accept key [Þ] (zero key) to indicate that the letter ‘a’ should be accepted and
that another letter from the same key will be chosen.
To type the letter ‘b’:
• Press the [2] key twice, and press [Þ] to accept the letter ‘b’.
To type the letter ‘c’:
• Press the [2] key three times.
When you have completed your alpha selections from this key, you can do one of the
following:
• If you want to choose additional alpha characters from another key(s), leave the
[ORANGE] key ‘on’, and press the numeric key with the alpha character you require, or
• If you do not want to choose any additional alpha characters, press [ORANGE] again to
unlock or turn ‘off’ the key and end alpha selection.
Note: If you want to use uppercase characters at all times, press [BLUE] [SHIFT]. An
icon of an uppercase ‘A’ is displayed in the taskbar indicating that all letters will be
displayed as uppercase characters.