7535/7530 Hand-Held Computer User Manual May 18, 2005 ISO 9001 Certified Quality Management System Part No. 8100063.
© Copyright 2005 by Psion Teklogix Inc., Mississauga, Ontario This document and the information it contains is the property of Psion Teklogix Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or in any manner detrimental to the interests of Psion Teklogix Inc.
Return-To-Factory Warranty Psion Teklogix warrants a return-to-factory warranty for a period of one year. In some regions, the warranty exceeds this period. Please contact your local Psion Teklogix office for details. For a list of offices, see Appendix A: Support Services And Worldwide Offices.
TABLE Program License Agreements . . Approvals And Safety Summary OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . .I . . . . . . . . . . . . . . . . . . . . . . . . . . .VII Chapter 1: Introduction 1.1 1.2 1.3 1.4 1.5 About This Manual . . . . . . . . . . . Text Conventions . . . . . . . . . . . . 7535/7530 Features . . . . . . . . . . . About The 7535 Hand-Held Computer . 1.4.1 The 7535 Hand-Held Computer . 1.4.2 Regulatory Labels . . . . . . . . About The 7530 Hand-Held Computer .
Contents 2.7 Resetting The Hand-Held . . . . . . . . . . . . . . . . . . . . . . . . 32 Chapter 3: Getting To Know Your 7535/7530 3.1 3.2 3.3 Features Of The 7535 . . . . . . . . . . . . . . . . . . . . . . . . Features Of The 7530 . . . . . . . . . . . . . . . . . . . . . . . . The Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3.1 Battery Safety . . . . . . . . . . . . . . . . . . . . . . . . . 3.3.2 Removing And Installing The Battery Pack . . . . . . . . . 3.3.
Contents 3.12 Uploading Data In A Docking Station 3.13 General Maintenance . . . . . . . . . 3.13.1 Caring For The Touchscreen . . 3.13.2 Cleaning The 7535/7530 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 . 63 . 63 . 64 Navigating In Windows CE .NET And Applications. 4.1.1 Navigating Using A Touchscreen And Stylus . 4.1.2 Navigating Using The Keyboard. . . . . . . .
Contents 5.6.1 The Devices Tab . . . . . . . . . . . . . . . . . 5.6.2 The Servers Tab. . . . . . . . . . . . . . . . . . 5.6.3 Outgoing Tab . . . . . . . . . . . . . . . . . . . 5.6.4 Active Conn. Tab . . . . . . . . . . . . . . . . . 5.6.5 The Properties Tab . . . . . . . . . . . . . . . . 5.6.6 The Bluetooth GPRS Phone . . . . . . . . . . . 5.7 Total Recall . . . . . . . . . . . . . . . . . . . . . . . 5.7.1 Creating A Backup Profile . . . . . . . . . . . . 5.7.2 Restoring A Profile . . . . . . . . . . .
Contents Chapter 6: Tekterm Application 6.1 6.2 The Tekterm Application . . . . . . . . . . . . . . . . . . . . . . Additional Keyboard Functions. . . . . . . . . . . . . . . . . . . 6.2.1 Function Keys And Softkeys. . . . . . . . . . . . . . . . . 6.2.2 Macro Keys . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 Changing The Screen Font Size. . . . . . . . . . . . . . . . . . . 6.4 Panning The Screen Contents . . . . . . . . . . . . . . . . . . . . 6.4.
Contents 6.11 Resetting The 7535/7530 Hand-Held Computer 6.12 The Parameters Menu . . . . . . . . . . . . . . 6.12.1 Security Settings . . . . . . . . . . . . . 6.13 Display Options . . . . . . . . . . . . . . . . . 6.14 More Parameters . . . . . . . . . . . . . . . . . 6.15 Radio Parameters . . . . . . . . . . . . . . . . 6.16 System Parameters . . . . . . . . . . . . . . . . 6.16.1 Keyboard . . . . . . . . . . . . . . . . . 6.16.2 Audio . . . . . . . . . . . . . . . . . . . 6.16.3 Power Mgmt Ctrl Panel. .
Contents 7.5 Gang Charger . . . . . . . . . . . . . . . . . . . . . . . . . 7.5.1 Installation . . . . . . . . . . . . . . . . . . . . . . . 7.5.2 Operator Controls . . . . . . . . . . . . . . . . . . . 7.5.3 Charge Indicators. . . . . . . . . . . . . . . . . . . . 7.5.4 Charging Batteries . . . . . . . . . . . . . . . . . . . 7.5.5 Troubleshooting . . . . . . . . . . . . . . . . . . . . 7.6 Combo Charger . . . . . . . . . . . . . . . . . . . . . . . . 7.6.1 Installation . . . . . . . . . . . . . . . . . .
Contents Chapter 8: Specifications 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10 8.11 8.12 8.13 8.14 7535 Hand-Held Computer Specifications . . . . . . . . . . . 7530 Hand-Held Computer Specifications . . . . . . . . . . . Radio Specifications . . . . . . . . . . . . . . . . . . . . . . . Internal Scanner Port. . . . . . . . . . . . . . . . . . . . . . . Bar Code Applications . . . . . . . . . . . . . . . . . . . . . . RFID Applications . . . . . . . . . . . . . . . . . . . . . . . . Internal Scanners. . . .
Contents Appendix C: Port Pinouts C.1 C.2 C.3 C.4 C.5 Tether Port Pinout . . . . . . . . Docking Station Connector . . . Battery Contacts . . . . . . . . . 7535 USB Cable – PN 1010099 7535 USB Cable – PN 1010057 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 C-1 C-2 C-2 C-3 Appendix D: USB Setup Application D.1 USB Setup. . . . .
PROGRAM LICENSE AGREEMENTS Microsoft's End User License Agreement You have acquired a device (“DEVICE”) that includes software licensed by Psion Teklogix Inc. from Microsoft Licensing Inc. or its affiliates (‘MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.
License Agreement THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLE FOR ANY AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S.$250.OO). Limitations on Reverse Engineering, Decompilation, and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.
License Agreement All permanent licenses are prepaid and the Software is licensed to you by MDC. You own the media on which the Software is recorded but MDC and/or MDC’s licensor(s) retain title to the Software. The Software and any copies which this License authorizes you to make are subject to this License. Permitted Uses and Restrictions: This License allows you to install and use the Software on a single computer at a time.
License Agreement alent agency regulation or contract clause), whichever is applicable. You have only those rights provided for such Software and Documentation by the applicable FAR or DFARS clause or the MDC standard software agreement for the product. Export Law Assurances: You may not use or otherwise export or reexport the Software except as authorized by United States law and the laws of the jurisdiction in which the Software was obtained.
License Agreement DEFECTIVE, YOU (AND NOT LICENSOR OR AN LICENSOR AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
License Agreement NOTE: EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT, OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF THE SOFTWARE TO YOU. Meetinghouse Data Communications, Inc.
APPROVALS AND SAFETY SUMMARY FCC DECLARATION OF CONFORMITY (DoC) Applicant’s Name & Address: US Representative’s Name & Address: PSION TEKLOGIX 2100 Meadowvale Blvd. Mississauga, Ontario Canada L5N 7J9 Contact Person: Iain Roy Telephone No.: (905) 813-9900 1810 Airport Exchange Blvd., Suite 500 Erlanger, KY, 41018, USA Contact Person: Joe Musgrave Telephone No.: (859) 372-4106 Equipment Type/Environment: Computing Devices Trade Name / Model No.
Approvals And Safety Summary CE Marking When used in a residential, commercial or light industrial environment the product and its approved UK and European peripherals fulfil all requirements for CE marking. R&TTE Directive 1999/5/EC This equipment complies with the essential requirements of EU Directive 1999/5/EC (Declaration available: www.psionteklogix.com). Cet équipement est conforme aux principales caractéristiques définies dans la Directive européenne RTTE 1999/5/CE.
Approvals And Safety Summary Utrustningen uppfyller kraven för EU-direktivet 1999/5/EC om ansluten teleutrustning och ömsesidigt erkännande av utrustningens överensstämmelse (R&TTE). (Förklaringen finns att läsa på: www.psionteklogix.com). Tämä laite vastaa EU:n radio- ja telepäätelaitedirektiivin (EU R&TTE Directive 1999/5/EC) vaatimuksia. (Julkilausuma nähtävillä osoitteessa: www.psionteklogix.com). Use of the 802.11b WORKABOUT PRO C & S in France: Owing to French Government restrictions, the 802.
Approvals And Safety Summary ference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
Approvals And Safety Summary Note: In August 1996 the Federal Communications Commission (FCC) of the US adopted an updated safety standard for human exposure to radio frequency energy emitted by FCC regulated transmitters. The design of this product complies with the FCC guidelines and those standards. To maintain compliance with the FCC RF exposure guidelines, if you wear the Workabout Pro on your body, use the supplied, or Psion Teklogix approve, carrying case.
Approvals And Safety Summary CAUTION Using controls or adjustments, or performing procedures other than those specified herein may result in hazardous radiation exposure. CAUTION The use of optical instruments (magnification devices) with this product will increase eye hazard. This product may contain a laser scanner that emits less than 1.4mW maximum radiant power at a wavelength of 610nm or 680nm.
1 INTRODUCTION 1.1 1.2 1.3 1.4 About This Manual . . . . . . . . . . . Text Conventions . . . . . . . . . . . . 7535/7530 Features . . . . . . . . . . . About The 7535 Hand-Held Computer . 1.4.1 The 7535 Hand-Held Computer . 1.4.2 Regulatory Labels . . . . . . . . 1.5 About The 7530 Hand-Held Computer . 1.5.1 The 7530 Hand-Held Computer . 1.5.2 Regulatory Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1: Introduction About This Manual 1.1 About This Manual This manual describes how to configure, operate and maintain the Psion Teklogix 7535 and 7530 hand-held computers. While the function of these units is generally identical, any differences are clearly described in this manual. Chapter 1: Introduction provides a basic overview of the 7535/7530 hand-helds. Chapter 2: Basic Checkout describes the steps required to get the 7535/7530 ready for operation.
Chapter 1: Introduction Text Conventions Appendix B: RD7950 Integrated UHF RFID Reader (7535 Only) describes how to install and enable the RD7950 RFID reader. Appendix C: Port Pinouts includes 7535/7530 pinouts. Appendix D: USB Setup Application provides detailed instructions on USB setup. 1.2 Text Conventions Note: Notes highlight additional helpful information.
Chapter 1: Introduction 7535/7530 Features • Operating System: - Windows CE. NET • Programming environment: - HTML, XML - Psion Teklogix Mobile devices SDK for CE .NET - Java, Embedded Visual C++, Microsoft Visual Studio .NET 2003 - Standard CE .NET APIs - MFC, ATL • Wireless communications: - IEEE 802.11b 11 Mbps 2.4 GHz Compact Flash radio - IEEE 802.11g 54 Mbps 2.
Chapter 1: Introduction 7535/7530 Features - Ergonomically designed for left- or right-hand use One-handed operation with keys on the left and right side of keyboard (7530 only) - Dedicated function keys 7535 – Two formats available: - 36-key large button numeric with 10 function keys - 58-key alpha with 10 function keys 7530 – Two formats available: - 37-key large button numeric with 10 function keys - 63-key alpha with 10 function keys 6 • Voice/Record Features: - Voice features - speaker and
Chapter 1: Introduction About The 7535 Hand-Held Computer Docking station port with: - RS232 serial with diagnostics - USB device - USB host - Power in/out • Freezer option: (7530 only) - Heated scan window to reduce fogging - Internal heat control optimizes low temperature performance and battery life • Power management: - Up to 12 hour usage Lithium-Ion standard battery (reduced in freezer applications) - Quick swap packs - Advanced smart battery with gas gauge - Runs with battery, wall adaptor or ciga
Chapter 1: Introduction The 7535 Hand-Held Computer 1.4.1 The 7535 Hand-Held Computer Figure 1.
Chapter 1: Introduction The 7535 Hand-Held Computer Figure 1.2 7535 Docking Port Figure 1.3 Tether Port Laser Aperture Figure 1.
Chapter 1: Introduction Regulatory Labels 1.4.2 Regulatory Labels This label is affixed below the scanner window. Figure 1.5 Laser Warning Label This label is affixed below the scanner window. Figure 1.
Chapter 1: Introduction Regulatory Labels Figure 1.7 Radio Labels Figure 1.8 Manufacturer’s Label Warning: Using controls or adjustments or performing procedures other than those specified herein may result in hazardous radiation exposure.
Chapter 1: Introduction About The 7530 Hand-Held Computer 1.5 About The 7530 Hand-Held Computer The 7530 is a ruggedized, Windows CE .NET based hand-held computer. It is designed to withstand the harshest mobile environments including cold environments like freezers, ports and yards. It supports wide area mobile applications and is built using industry standards-based software and hardware components, making it easy to integrate existing or future site infrastructures. 1.5.
Chapter 1: Introduction Regulatory Labels Scanner Window Tether Port Docking Port Figure 1.10 7530 Scanner Window, Tether Port And Scanner Window 1.5.2 Regulatory Labels This label is affixed below the scanner window. Figure 1.
Chapter 1: Introduction Regulatory Labels Figure 1.
2 BASIC CHECKOUT 2.1 Preparing The 7535/7530 For Operation. . . . . . . . . . . . . . . . . . . . 17 2.1.1 Equipment You Need To Get Started . . . . . . . . . . . . . . . . . . 17 2.1.2 Charging The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.1.3 Attaching Carrying Accessories . . . . . . . . . . . . . . . . . . . . . 18 2.1.3.1 Attaching The Hand Strap . . . . . . . . . . . . . . . . . . 18 2.1.3.2 Attaching The Pistol Grip . . . . . . . . . . . . . . . . . . 19 2.
Chapter 2: Basic Checkout Preparing The 7535/7530 For Operation 2.1 Preparing The 7535/7530 For Operation Typically, 7535/7530 hand-helds are configured at the factory and arrive ready for use. Although these hand-helds are equipped with an internal Compact Flash and SD I/O slot, these slots are not intended for user modification. If a device needs to be changed or added in these slots, contact qualified Psion Teklogix personnel.
Chapter 2: Basic Checkout Attaching Carrying Accessories Regarding battery calibration, keep in mind that all types of battery chargers available for the 7535 contain single discharge circuits so that only one battery can be calibrated at a time (a calibration cycle requires discharging the battery and then calibrating to the new full charge). If multiple batteries require calibration, care should be taken to ensure that these batteries are placed into a charger that is not already calibrating a battery.
Chapter 2: Basic Checkout Attaching The Pistol Grip • Stretch the handstrap toward the base of the 7535/7530, and hook the bottom of the handstrap into the slot near the base of the battery pack. Figure 2.2 Hooking The Hand Strap In Place 2.1.3.2 Note: Attaching The Pistol Grip A Phillips head screwdriver is required. The pistol grip is attached to the back of the 7535/7530 using the four threaded inserts in the upper part of the 7535/7530 casing.
Chapter 2: Basic Checkout Powering Up The 7535/7530 • Position the pistol grip so that it fits snugly over the back of the unit and the inserts on the back of the hand-held are aligned with the holes in the pistol grip. Figure 2.3 Attaching The Pistol Grip • Using a Phillips screwdriver, securely fasten the pistol grip to the back of the 7535/7530. 2.
Chapter 2: Basic Checkout Installing The Battery And Switching The Hand-Held On 2.2.1 Installing The Battery And Switching The Hand-Held On If you are not using a docking station or PDM: • Slide the charged battery with the contoured plastic facing you into the unit. Click the battery into place. Figure 2.4 Installing The Battery Note: If you are using a docking station, you can insert an uncharged battery, dock the unit and switch it on.
Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio In The Unit 2.3 Configuring An IEEE 802.11 Radio In The Unit The most common 802.11b settings are configured as defaults. However, there are some fields that must be completed, including the SSID of your access point and the security methods implemented in the network (including access keys).
Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio In The Unit 2. Choose the radio icon to open the 802.11b Wireless LAN Settings window – in the sample screen, this is labelled $NETWLAN1. Figure 2.6 802.11b Wireless LAN Settings Window 3. Wireless Statistics Tab When you choose the Wireless LAN icon, an 802.11b Wireless LAN Settings window ($NETWLAN1 in the sample below) is displayed. Figure 2.7 Wireless Statistics This tab lists your radio statistics.
Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio In The Unit 4. Wireless Information Tab The options under this tab display existing networks to which you can connect, and it allows you to add a new network or modify the settings for an existing network. Note: Configure button – To change the settings in an existing network, highlight the network you want to modify, and choose the Configure button to display the Wireless Properties dialog box.
Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio In The Unit 5. Wireless Properties Figure 2.9 Wireless Properties Dialog Box Network name (SSID): • Type the appropriate SSID (Service Set Identifier) in the Network name (SSID) text box at the top of this dialog box. The Network name field can contain a maximum of 32 characters. The name assigned here is listed as a preferred network.
Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio In The Unit Authentication 802.11 supports two subtypes of network authentication services: Open and Shared. Under Open authentication, any wireless station can request authentication. The station that needs to authenticate with another wireless station sends an authentication management frame that contains the identity of the sending station.
Chapter 2: Basic Checkout Configuring An IEEE 802.11 Radio In The Unit Enable 802.1x authentication 802.1X is the IEEE standard that offers additional security for local area networks. It provides authentication for user devices attached to an Ethernet network, whether wired or wireless. A security protocol packet such as TLS or MD5 encapsulated in an EAP is used in conjunction with the 802.1X standard to authenticate users at the MAC layer.
Chapter 2: Basic Checkout Assigning An IP Address 2.3.1 Assigning An IP Address If your network is not using a DHCP server, you will need to assign an IP address. • In the $NETWLAN1 Settings window, display the IP Information tab. Figure 2.11 IP Information Note: Choosing the Renew button forces the 7535/7530 to renew or find a new IP address. This is useful if, for example, you are out of communication range for a longer period of time and your 7535/7530 is dropped from the network.
Chapter 2: Basic Checkout Name Servers Tab • • Tap the stylus on the radio button next to Specify an IP address to select it. Type an IP, Subnet Mask and Default Gateway address in the appropriate fields. Press to save your information. 2.3.2 Name Servers Tab Note: • • • If DHCP is enabled, name server addresses are assigned automatically. In the $NETWLAN1 Settings window, display the IP Information tab. In the IP Information tab, tap on the Configure button. Display the Name Servers tab.
Chapter 2: Basic Checkout Advanced Features 2.3.3 Advanced Features To display the Advanced Wireless Settings dialog box: • Tap the Advanced button in the Wireless Information tab. This window lists the available preferred networks. Figure 2.14 Advanced Settings 2.3.3.1 Rearranging Preferred Networks The 7535/7530 attempts to connect with the networks listed in this dialog box in sequence, beginning at the top of the list.
Chapter 2: Basic Checkout Changing Network Properties 2.3.3.3 Changing Network Properties To change the properties of an existing preferred network: • Highlight the network that you want to modify. • Tap on the Properties button. • Make any necessary changes in the Wireless Properties dialog box, and press to save the changes. 2.4 Checking The Scanner Note: Details about operating and troubleshooting scanners and RFID readers are provided under the heading “Internal Scanners” on page 53.
Chapter 2: Basic Checkout Calibrating The Touchscreen 2.6 Calibrating The Touchscreen Note: Keep in mind that all 7530 hand-helds are equipped with touchscreens as a standard feature. 7535 hand-helds can be ordered with or without a touchscreens. If your 7535/7530 is equipped with a touchscreen, it will need to be calibrated. Refer to “Calibrating The Touchscreen” on page 46 for details. 2.
3 GETTING TO KNOW YOUR 7535/7530 3.1 Features Of The 7535 . . . . . . . . . . . . . . . . . . . . . . . 3.2 Features Of The 7530 . . . . . . . . . . . . . . . . . . . . . . . 3.3 The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3.1 Battery Safety . . . . . . . . . . . . . . . . . . . . . . . . 3.3.2 Removing And Installing The Battery Pack . . . . . . . . 3.3.3 Battery Chargers . . . . . . . . . . . . . . . . . . . . . . 3.4 Switching The Hand-Held On And Off . . . . . . . . . . . . .
Chapter 3: Getting To Know Your 7535/7530 3.8.6 Operating Internal Two Dimensional (2D) Imager Scanners . 3.8.7 Operating RFID/Scanner Modules . . . . . . . . . . . . . . 3.9 Connecting & Disconnecting Tethered Peripherals . . . . . . . . . 3.10 Monitoring The Battery And Maximizing Run Time . . . . . . . 3.10.1 Storing Batteries . . . . . . . . . . . . . . . . . . . . . . . 3.11 Monitoring The Network Connection . . . . . . . . . . . . . . . 3.12 Uploading Data In A Docking Station . . . . . . . . . . . .
Chapter 3: Getting To Know Your 7535/7530 Features Of The 7535 3.1 Features Of The 7535 7535 Screen Sound Port Ambient Light Sensor Tether Port Docking Port Figure 3.1 Front Of 7535 Scanner Window Stylus (Pointing Tool) Warning Label Battery Pack Tether Port Figure 3.
Chapter 3: Getting To Know Your 7535/7530 Features Of The 7530 3.2 Features Of The 7530 Stylus (Pointing Tool) Sound Port 7530 Screen Ambient Light Sensor Microphone Beeper Port Figure 3.
Chapter 3: Getting To Know Your 7535/7530 The Battery Scanner Window Tether Port Battery Pack Docking Port Figure 3.4 Back Of 7530 3.3 The Battery The hand-held operates with a Lithium-Ion battery pack. Preparing the unit for operation requires that a battery pack be charged and installed in the 7535/7530. 3.3.
Chapter 3: Getting To Know Your 7535/7530 Battery Chargers Removing The Battery Pack • If your unit is equipped with a hand strap, unhook it from the base of the battery. • Press down the release tab at the top of the battery, and slide the battery out. Installing The Battery Pack To install the battery pack: • Slide the battery pack with the contoured plastic facing you into the 7535/7530. Click the battery into place. Figure 3.
Chapter 3: Getting To Know Your 7535/7530 Switching The Hand-Held On And Off • • • • • • 6-Unit Gang Charger (Model #HU3006) – charges up to six Lithium-Ion batteries at one time. Portable Docking Module (Model #HU4001 or HU1005 and HU3220) – charges the 7535/7530 battery (with the battery installed in the unit). Combo Charger (Model #HU3002) – a desktop charger that charges the internal battery along with a spare battery pack.
Chapter 3: Getting To Know Your 7535/7530 The Keyboard Switching Off The Unit Important: Keep in mind that turning off the 7535/7530 does not result in a complete reboot; rather, the unit enters a power-saving, “suspend” state. When the 7535/7530 is turned on from suspend state, operation resumes within a few seconds. To switch off the 7535/7530: • Press the key, and then press the key.
Chapter 3: Getting To Know Your 7535/7530 Activating Modifier Keys The , and keys operate much like a desktop keyboard except that they are not chorded (two keys held down simultaneously). The modifier key must be pressed first followed by the key whose function you want modified. 3.5.1.1 Activating Modifier Keys When a modifier key is pressed once, it is displayed in lowercase letters in the taskbar at the bottom of the hand-held screen.
Chapter 3: Getting To Know Your 7535/7530 Alphanumeric Keyboards - 58-Key And 63-Key The Key The key (sometimes referred to as destructive backspace) moves the cursor one character to the left, erasing the incorrectly entered key stroke. The key ( ) erases the character at the cursor position. The And Key The and keys modify the function of the next key pressed and are application dependent.
Chapter 3: Getting To Know Your 7535/7530 Numeric Keyboards - 36-Key And 37-Key 3.5.4 Numeric Keyboards - 36-Key And 37-Key On 36-key 7535s and 37-key 7530s, all alpha characters are printed on the unit plastic in orange typeface above the numeric keys. To access an alpha character, you must first press the key and then press the numeric key above which the alpha character you want to type is printed.
Chapter 3: Getting To Know Your 7535/7530 Numeric Keyboards - 36-Key And 37-Key Choosing More Than One Alpha Character From The Same Key If you need to choose more than one alpha character from a single key, you’ll need to press the ‘Accept’ key between alpha selections. The ‘Accept’ key is presented as an arrow ⇒ symbol above the ‘0’ (zero) key. Pressing this key signals the 7535/7530 to display the alpha character you’ve chosen and await the next selection from the same key.
Chapter 3: Getting To Know Your 7535/7530 The Keypad Backlight Suppose you want to type the letters ‘a’, ‘d’ and ‘g’. These alpha characters are accessed from the numeric keys <2>, <3> and <4>. • With the key locked ‘on’, press <2> to type the letter ‘a’. • Press <3> to type ‘d’, and press <4> to type the letter ‘g’. • To end alpha selection, unlock the key. 3.5.
Chapter 3: Getting To Know Your 7535/7530 Calibrating The Touchscreen The display contrast can be adjusted from the unit keyboard using the key and function keys and . Pressing darkens the display, and pressing lightens the display. Keep in mind that adjusting the contrast on a colour display is much less pronounced than on a monochrome display.
Chapter 3: Getting To Know Your 7535/7530 7535/7530 Indicators • Select the Calibration tab, and then choose the Recalibrate button. Figure 3.7 Calibration Screen • Follow the directions on the calibration screen to calibrate the screen. 3.7 7535/7530 Indicators 7535s and 7530s use LEDs (Light Emitting Diode), onscreen messages and audio tones as indicators. 3.7.1 LEDs Hand-helds are equipped with four tri-coloured LEDs. This section outlines what these LEDs indicate.
Chapter 3: Getting To Know Your 7535/7530 Charge LED User Application LED Radio Traffic LED Scanner LED Charge LED Figure 3.8 Keyboard LEDs Note: 3.7.1.1 The LED function is identical between 7535 and 7530 hand-helds. Charge LED The lower-right LED is reserved for internal charger/power status. This indicator is active even when the hand-held is inserted in a docking station (and in suspend mode) so that the charge status of the battery can be detected easily. Function External power not available.
Chapter 3: Getting To Know Your 7535/7530 Radio Traffic LED Function Charge LED Behaviour Charge in progress. Cell temperature out of range for charge. Unable to charge battery. Charge circuit failure.* LED displays solid yellow colour. LED flashes yellow. LED displays solid red colour. LED flashes fast red.* Table 3.1 Charge LEDs * If the charge fails, refer to the charger troubleshooting sections in ‘Chapter 7: Peripheral Devices & Accessories’ beginning on page 321 for helpful details. 3.7.1.
Chapter 3: Getting To Know Your 7535/7530 Onscreen Indicators 3.7.2 Onscreen Indicators The taskbar at the bottom of the screen displays a variety of system status indicators. Figure 3.9 Taskbar The taskbar changes dynamically, and only those icons that are applicable are displayed. For example, if a radio is not installed in your 7535/7530, the radio signal icon is not displayed in the taskbar.
Chapter 3: Getting To Know Your 7535/7530 Onscreen Indicators modifier key is pressed twice, it is ‘locked on’ and the onscreen indicator is displayed in uppercase letters in the taskbar – for example, pressing twice displays BLUE KEY in the taskbar. Battery Gauge The battery shaped icon displayed in the taskbar provides a visual indication of the remaining battery power. The icon acts as a meter that is either full, at three-quarter level, half, quarter level or empty.
Chapter 3: Getting To Know Your 7535/7530 Onscreen Indicators Narrow Band Radio Signal Quality Increasing radio signal quality is represented by vertical bars within this icon. Good Reception Weak Reception No Radio Link Tethered Devices When a peripheral is attached to the tether port and activated, an associated icon appears in the taskbar.
Chapter 3: Getting To Know Your 7535/7530 Audio Indicators Wireless WAN These icons provide access to and information about the 7535/7530 GSM/GPRS wide area networking status. Refer to “Wireless WAN” on page 202 for details about each of these taskbar icons. 3.7.
Chapter 3: Getting To Know Your 7535/7530 Internal Scanners However, external decoded scanners must be configured by scanning special configuration bar codes. In these cases, the scanner manufacturer provides programming manuals for configuration purposes. • For Symbol decoded scanners, refer to the appropriate programming guide: • P300. • LS3408 • For Symbol non-decoded scanners, refer to the LS3200 Programming Guide.
Chapter 3: Getting To Know Your 7535/7530 Scanning Techniques It is critical that you review the warnings listed in the “Approvals and Safety” section at the beginning of this manual before using any of the scanners described in this chapter. “Scanning Techniques” outlines the mechanics of a successful scan. In addition, review “Scan LED Indicators” on page 55 to better understand how to interpret whether or not a bar code has been successfully scanned.
Chapter 3: Getting To Know Your 7535/7530 Troubleshooting 3.8.3 Troubleshooting If the scanner is not working, investigate the following: • Is the unit on? • Check that the bar code symbology being scanned is enabled for the hand-held you are using. Check any other parameters that affect the scanning procedure or the bar code. • Check the bar code to make sure it is not damaged. Try scanning a different bar code to verify that the problem is not with the bar code.
Chapter 3: Getting To Know Your 7535/7530 Operating Internal PDF Laser Scanners 3.8.5 Operating Internal PDF Laser Scanners This scanner decodes PDF417 two-dimensional bar codes. • Turn the hand-held on. Wait until the unit has booted up completely. • Aim at the bar code and press the scan key or the trigger. The beam expands into a rectangle covering the bar code to properly scan it. The scan beam and a warning indicator are visible until a successful decode is achieved or three seconds have elapsed.
Chapter 3: Getting To Know Your 7535/7530 Operating RFID/Scanner Modules • Aim at the bar code and press the scan key or the trigger. • When the scan button or trigger is pressed, a red, oval shaped light (the framing marker) is displayed. Centre the framing marker in the field – either in the centre of the bar code you want to scan or in the centre of the area in which multiple bar codes are to be scanned. Illumination LEDs will flash and a picture of the bar code(s) is taken. 3.8.
Chapter 3: Getting To Know Your 7535/7530 Connecting & Disconnecting Tethered Peripherals Scanning A Bar Code • • Note: Turn the hand-held on. Wait until the unit has booted up completely. Aim at the bar code and press the scan key or the trigger. The beam expands, covering the bar code to properly scan it. The scan beam and a warning indicator are visible until a successful decode is achieved or three seconds have elapsed. The SE923 scanner is not equipped with a targeting dot. 3.
Chapter 3: Getting To Know Your 7535/7530 Monitoring The Battery And Maximizing Run Time To remove the peripheral: • Grasp the shell of the plug, and pull it back gently to unlock and release the connector. Figure 3.11 Disconnecting The Tether Cable Important: Never attempt to disconnect a peripheral by pulling the connector by the wire. The connector is locked into place and can only be unlocked and removed by pulling back the plug shell. 3.
Chapter 3: Getting To Know Your 7535/7530 Monitoring The Battery And Maximizing Run Time • The display backlight is the largest drain on the battery. Try to keep its brightness as low as possible. • The hand-held is ‘event’ driven – that is, when the unit is not in use, it reverts to sleep mode (even when it appears to be running), saving battery power. Events include a key press, touchscreen taps and scan triggers.
Chapter 3: Getting To Know Your 7535/7530 Storing Batteries 3.10.1 Storing Batteries Long term battery storage is not recommended. If storage is necessary: • Always try to use a ‘first-in first-out’ approach to minimize storage time. • Lithium-Ion batteries age much faster at elevated temperatures. Store batteries at temperatures between 0° C and 20°C. • Always charge batteries to 40 to 60% before storing them.
Chapter 3: Getting To Know Your 7535/7530 Uploading Data In A Docking Station 3.12 Uploading Data In A Docking Station The Combo Docking and Quad Docking peripherals allow your hand-held to link to an Ethernet network. They are typically used to upload transaction data to a server computer when a radio link is not available. When a 7535/7530 is properly inserted in a docking station, a dock icon is displayed in the taskbar at the bottom of the unit screen.
Chapter 3: Getting To Know Your 7535/7530 Cleaning The 7535/7530 3.13.2 Cleaning The 7535/7530 Important: 64 Do not immerse the unit in water. Dampen a soft cloth with mild detergent to wipe the unit clean. • Use only mild detergent or soapy water to clean the hand-held unit. • Avoid abrasive cleaners, solvents or strong chemicals for cleaning. The 7535/7530 has a plastic case that is susceptible to harsh chemicals. The plastic is partially soluble in oils, mineral spirits and gasoline.
4 WORKING WITH WINDOWS CE 4.1 Navigating In Windows CE .NET And Applications . 4.1.1 Navigating Using A Touchscreen And Stylus . 4.1.2 Navigating Using The Keyboard . . . . . . . . 4.2 Working With Files, Folders And Programs . . . . . 4.3 The Startup Desktop . . . . . . . . . . . . . . . . . 4.3.1 The Desktop Icons . . . . . . . . . . . . . . . 4.3.2 The Taskbar . . . . . . . . . . . . . . . . . . . 4.3.2.1 Using The Taskbar . . . . . . . . . . . 4.3.2.2 Customizing The Taskbar . . . . . . . 4.
Chapter 4: Working With Windows CE Navigating In Windows CE .NET And Applications 4.1 Navigating In Windows CE .NET And Applications Graphic user interfaces like Windows CE .NET for portable devices and desktop Windows (2000, XP, etc.) utilize ‘point and click’ navigation. An equivalent keyboard shortcut is also available for every ‘point and click’ action. Windows CE .
Chapter 4: Working With Windows CE Working With Files, Folders And Programs Move the cursor Arrow keys Open file, folder or icon Exit & Save Close/Exit & Do Not Save Navigate Dialog Boxes To move cursor up To display the contents of the next ‘tab’ in a dialog box Select Radio Button/Press Button Go to Start Menu <0> Table 4.
Chapter 4: Working With Windows CE The Startup Desktop If you’re using the keyboard: • Use the arrow keys to highlight the icon you want to open or launch. • Press . 4.3 The Startup Desktop When the 7535/7530 boots up, the startup desktop (shell) is displayed. Any applications stored in the Startup folder start up immediately. Note: The startup folder is located in \Windows\StartUp and \Flash Disk\StartUp. Figure 4.
Chapter 4: Working With Windows CE The Desktop Icons 4.3.1 The Desktop Icons The icons displayed in the startup desktop operate in much the same way as those displayed on any standard PC desktop that is running Windows. My Computer Choosing this icon displays the contents of your 7535/7530 computer. If you’re not sure how to work with the files, folders and programs displayed, refer to “Working With Files, Folders And Programs” on page 68.
Chapter 4: Working With Windows CE Using The Taskbar The 7535/7530 is equipped with a taskbar at the bottom of the screen. It displays icons through which you can view the battery capacity and radio signal quality of your unit. If the hand-held is attached to a charger, cradle, docking station or PDM, an associated icon is displayed. In addition, the taskbar displays the application(s) currently running on your unit and the security level assigned to your 7535/7530.
Chapter 4: Working With Windows CE The Start Menu The Taskbar and Start Menu dialog box is displayed. Figure 4.4 Taskbar And Start Menu Settings • Tap the stylus on the items you want to activate or deactivate. The check mark indicates active items. If you’re using the keyboard: • Highlight the options you want to activate, and press the key to select them. A check mark indicates active items. 4.
Chapter 4: Working With Windows CE The Desktop Figure 4.5 Start Menu If you’re using the keyboard: • Use the arrow keys to highlight a menu item, and press , or If the menu item has an underlined character: • Type the underlined alpha character – for example, to display the Power Info dialog box, type the letter p. 4.4.1 The Desktop Choosing the Desktop option from the Start Menu displays the 7535/7530 desktop.
Chapter 4: Working With Windows CE Security Settings 4.4.2 Security Settings Choosing the Security option from the Start Menu displays a dialog box in which you can define the access level for the 7535/7530 – Supervisor or User. Figure 4.6 Security Levels Assigning The Supervisor Security Level The security level is represented by an icon in the shape of a lock in the taskbar. The security levels define the options accessible to the operator in the Start Menu and the taskbar.
Chapter 4: Working With Windows CE Security Settings In the Security Level dialog box: • Select the Configure button. Figure 4.7 Configuring Security • Select the checkbox next to Allow Teklogix Security Level to enable this option, and then select OK. Figure 4.8 Security Levels The Teklogix level security is now available in the Security Level dialog box. • Select the radio button next to Teklogix.
Chapter 4: Working With Windows CE Security Settings Changing A Password Note: Keep in mind that this is the same password as that assigned through the Password control panel applet. Refer to “Control Panel Icons” on page 90. To assign a password: • Choose a security level, and enter the existing password in the Password field • Select the Set Password button. A dialog box labelled Password Properties is displayed.
Chapter 4: Working With Windows CE Programs 4.4.3 Programs • Choose Programs to display a sub-menu of options. Figure 4.10 Program Sub-Menu This sub-menu allows you to choose ActiveSync and Command Prompt, and you can access the Internet Explorer, installed applications (e.g., Open Tekterm), Remote Desktop Connection or Windows Explorer. ActiveSync® This option allows you to connect to another device using ActiveSync. Command Prompt Command Prompt is used to access the DOS command prompt.
Chapter 4: Working With Windows CE Shortcuts Windows Explorer The Windows Explorer installed on your 7535/7530 is consistent with all Windows CE .NET 4.2 devices. You can access this option from the Start Menu under Programs, Windows Explorer. Remote Desktop Connection Remote Desktop Connection is a 7535/7530 application used to connect to a Windows Terminal Server so that you can run a “session” on the Server machine using the 7535/7530 (Windows CE .NET device).
Chapter 4: Working With Windows CE Shortcuts Cycle Tasks When Cycle Tasks is selected (and the Task Manager is not open), you can cycle through active applications. To cycle through your active applications: • Choose Shortcuts, Cycle Tasks, or Press . The Task Manager The Task Manager allows you to switch to another task or to end an active task. To display the task manager window: • Tap on Shortcut, Task Manager, or Press . Figure 4.
Chapter 4: Working With Windows CE Settings 4.4.5 Settings The Settings sub-menu includes the following settings: Control Panel, Network and Dial-up Connections and Taskbar and Start Menu. Figure 4.13 Settings Sub-Menu Control Panel The Control Panel contains applets used to configure hardware, the operating system and the shell. If your 7535/7530 is running with the Psion Teklogix Tekterm application or another application, additional configuration applets may appear in the Control Panel.
Chapter 4: Working With Windows CE Run 4.4.6 Run Choosing the Run option from the Start Menu displays a dialog box in which you can enter the name of the program, folder or document you want to open or launch. Figure 4.14 Run Dialog Box 4.4.7 Shutdown The Shutdown menu includes the following options: Suspend, Warm Reset and Cold Reset. Figure 4.
Chapter 4: Working With Windows CE Using A Dialog Box Note: This menu varies slightly depending on the security level chosen. When the 7535/7530 is set to User level, the Shutdown option is replaced by Suspend. A sub-menu is not available. At Teklogix security level, an additional option is available in the sub-menu – Bootloader. This option behaves like cold-reset, except that the 7535/7530 starts Bootloader rather than Windows CE .NET.
Chapter 4: Working With Windows CE Using A Dialog Box Tabs Radio Button Textbox Dropdown Menu Checkbox Button Figure 4.16 Dialog Boxes Note: If your unit is equipped with a touchscreen, you can use the stylus to tap on an element in a dialog box to select or deselect it, display dropdown menu items, save your selections, and so on. Dialog boxes contain one or more of the following elements: Tab: A tab separates different elements of a dialog box.
Chapter 4: Working With Windows CE Using A Dialog Box Radio buttons: These buttons allow you to choose from a number of options. For example, in the sample screen in Figure 4.16 on page 83 you can choose to Obtain an IP address via DHCP or Specify an IP address. Press the key to highlight a radio button option, and then select a radio button by pressing the arrow keys to highlight the appropriate option.
5 CONFIGURATION 5.1 5.2 5.3 5.4 5.5 Remote Desktop Connection . . . . . . . . . Pocket PC Compatibility . . . . . . . . . . . The Control Panel . . . . . . . . . . . . . . . Control Panel Icons . . . . . . . . . . . . . . Basic Setup . . . . . . . . . . . . . . . . . . 5.5.1 Display Properties . . . . . . . . . . . 5.5.1.1 Display Contrast . . . . . . . . 5.5.1.2 Display Backlight . . . . . . . 5.5.1.3 Display Appearance . . . . . . 5.5.2 Keyboard Properties . . . . . . . . . . 5.5.2.1 Key Repeat. . . . .
Chapter 5: Configuration 5.6.5 The Properties Tab . . . . . . . . . . . . . . . . . . . 5.6.6 The Bluetooth GPRS Phone. . . . . . . . . . . . . . . 5.7 Total Recall . . . . . . . . . . . . . . . . . . . . . . . . . . 5.7.1 Creating A Backup Profile . . . . . . . . . . . . . . . 5.7.2 Restoring A Profile . . . . . . . . . . . . . . . . . . . 5.8 IPv6 Support . . . . . . . . . . . . . . . . . . . . . . . . . . 5.9 Narrow Band Radio Setup — 7530 Only . . . . . . . . . . . 5.9.1 Info Tab . . . . . . . . . . .
Chapter 5: Configuration 5.10.3.10 Codabar . . . . . . . . . . . . . . . . . . . 5.10.3.11 Code 93 . . . . . . . . . . . . . . . . . . . 5.10.3.12 Interleaved 2 of 5 . . . . . . . . . . . . . . 5.10.3.13 MSI Plessey . . . . . . . . . . . . . . . . . 5.10.3.14 Discrete 2 of 5. . . . . . . . . . . . . . . . 5.10.3.15 2D PDF-417. . . . . . . . . . . . . . . . . 5.10.3.16 2D Micro PDF-417 . . . . . . . . . . . . . 5.10.3.17 2D RSS Code (Reduced Space Symbology) 5.10.3.18 Composite . . . . . . . . . . . . . . .
Chapter 5: Configuration 5.10.5.16 2D PDF-417 . . . . . . . . . . . . . . . . . . . . 5.10.5.17 2D Micro PDF-417 . . . . . . . . . . . . . . . . 5.10.5.18 2D QR Code . . . . . . . . . . . . . . . . . . . . 5.10.5.19 2D RSS Code . . . . . . . . . . . . . . . . . . . 5.10.5.20 Aztec. . . . . . . . . . . . . . . . . . . . . . . . 5.10.5.21 Composite . . . . . . . . . . . . . . . . . . . . . 5.10.6 Decoded (External) . . . . . . . . . . . . . . . . . . . . . 5.10.6.1 Tether Port . . . . . . . . . . . . . . . .
Chapter 5: Configuration Remote Desktop Connection 5.1 Remote Desktop Connection Remote Desktop Connection is a 7535/7530 application used to connect to a Windows Terminal Server so that you can run a “session” on the Server machine, using the 7535/7530 (Windows CE .NET device). Refer to the following website for step-by-step information about setting up this connection: http://www.microsoft.com/WindowsXP/pro/using/howto/gomobile/remotedesktop/default.asp 5.
Chapter 5: Configuration Control Panel Icons If you’re using the keyboard: • Press <0> to display the Start Menu. • Highlight Settings in Start Menu, and press the arrow key to highlight the Control Panel. • Press the key. The Control Panel folder contains icons used in the setup of your 7535/7530. Figure 5.1 Control Panel 5.4 Control Panel Icons The Control Panel provides a group of icons that allow you to customize and adjust settings on your 7535/7530.
Chapter 5: Configuration Control Panel Icons Keyboard Toggles character repeat on and off and specifies delay and rate for repeated characters. It also allows you to adjust the keyboard backlight threshold and intensity. Volume & Sound Allows you to adjust the volume of the sound emitted to indicate events like warnings, key clicks and screen taps. This option also allows you to tailor sounds (wave files) emitted from your unit.
Chapter 5: Configuration Control Panel Icons Regional Settings Allows you to specify the local language that is to be displayed on the hand-held screen along with the format of numbers, currency, time and date for your region. Remove Programs Lists the programs that can be removed from your unit. To remove a program, select it and then click on the Remove button. Stylus Adjusts how Windows CE .NET recognizes your double-tap (as slow or rapid successive taps).
Chapter 5: Configuration Control Panel Icons PC Connection Enables direct connections to a desktop computer. Selecting the Change Connection button allows you to change the type of direct connect to your PC. Teklogix Scanners Provides scanner parameters and the bar code symbologies that the 7535/7530 scanner will successfully read. Network And Dial-up Connections Displays a network window from which the 7535/7530 802.11 radio can be configured and an existing configuration can be executed.
Chapter 5: Configuration Basic Setup Total Recall Provides access to a backup and restore utility to maintain applications and settings over cold reboots. IPv6 Support Refers to a new Internet Protocol specification (version 6) that has been published to use 128-bit IP addresses (replacing version 4). Wireless WAN Provides access to technology like GSM/GPRS and CDMA which allows wide area networking capability such as internet browsing via GSM/GPRS.
Chapter 5: Configuration Display Contrast 5.5.1.1 Display Contrast The Contrast tab allows you to adjust the 7535/7530 display contrast to suit the environment in which you are using the hand-held. The contrast control can also be used to reduce display flickering that can occur with colour displays in certain lighting conditions • In the Display Properties dialog box, open the Contrast tab. Figure 5.
Chapter 5: Configuration Display Backlight • In the Display Properties dialog box, open the Backlight tab. Figure 5.4 Display Backlight Properties Note: Backlight changes take affect immediately. You do not need to reset the unit. ON Threshold The 7535/7530 is equipped with an ambient light sensor. This sliding bar allows you to determine how dark the ambient light needs to be before the backlight turns on. Intensity This parameter is used to adjust the light intensity of the 7535/7530 backlight.
Chapter 5: Configuration Display Appearance External Power Checkbox When you select the checkbox next to When using external power keep the backlight always ON, the backlight remains ON at the configured intensity when the 7535/7530 is operating with external power (not battery power). If the 7535/7530 is drawing power from its battery, this option is ignored and the other parameters defined in Display Properties dialog box take affect. 5.5.1.
Chapter 5: Configuration Keyboard Properties 5.5.2 Keyboard Properties This icon displays the Keyboard Properties dialog box in which you can adjust the repeat rate of the keys, the intensity of the keyboard backlight and the behaviour of the and modifier keys. This dialog box also allows you to define macro keys and Unicode characters. • In the Control Panel, choose the Keyboard icon. Figure 5.6 Choosing The Keyboard Icon 5.5.2.
Chapter 5: Configuration Keyboard Backlight Repeat Delay The value assigned for this parameter determines the delay in milliseconds between repeat characters. Sliding the Repeat Delay bar to the left increases the delay between key repeats, and sliding the bar to the right shortens the repeat delay time. Repeat Rate The value assigned for the Repeat Rate parameter determines how quickly the key you press repeats and is measured in characters per second (cps).
Chapter 5: Configuration Keyboard One Shot Modes Intensity This parameter is used to adjust the light intensity of the 7535/7530 keyboard backlight. Sliding the bar to the left darkens the keyboard backlight intensity, and sliding it to the right lightens the intensity. ON Time The value chosen from this dropdown menu determines the duration of time that the keyboard backlight stays on when a unit is not in use. 5.5.2.
Chapter 5: Configuration Keyboard Macro Keys 5.5.2.4 • Keyboard Macro Keys In the Keyboard Properties dialog box, open the Macros tab. Figure 5.10 Macro Dialog Box A macro has 200 programmable characters (or “positions”). The macro keys can be programmed to replace frequently used keystrokes, along with the function of executable keys including , and (-), function keys and arrow keys.
Chapter 5: Configuration Keyboard Macro Keys A message screen is displayed instructing you to Please Enter Key Strokes Figure 5.11 Recording A Macro • Type the macro sequence you want to assign to the Macro key. You can type text and numbers, and you can program the function of special keys into a macro. • When you’ve finished recording your macro sequence, press the key sequence – , or choose the Stop Recording button. A new screen displays the macro sequence you created.
Chapter 5: Configuration Unicode Mapping Deleting A Macro To delete a macro: • In the Macros tab, highlight the macro number you want to delete. • Choose the Delete Macro button. 5.5.2.5 • Unicode Mapping In the Keyboard Properties dialog box, open the Unicode Mapping tab. Figure 5.12 Unicode Mapping The Unicode Mapping tab is used to map combinations of virtual key values and and states to Unicode™ values. This tab shows the configured Unicode character along with the Unicode value.
Chapter 5: Configuration Unicode Mapping Adding And Changing Unicode Values Important: • Changes to Unicode mappings are not saved until you exit the Keyboard Properties dialog box. Choose the Add/Change button. Figure 5.13 Adding And Change Unicode Values • Highlight a value in the Unicode mapping list – in the sample screen above, a value will be assigned to virtual key 0 (VK 0). • Position the cursor in the Unicode Mapping field, and type a Unicode value for the highlighted key.
Chapter 5: Configuration Scancode Remapping 5.5.2.6 Scancode Remapping A scancode is a number that is associated with a physical key on a keyboard. Every key has a unique scancode that is mapped to a virtual key, a function or a macro. Scancode Remapping allows you to change the functionality of any key on the keyboard. A key can be remapped to send a virtual key (e.g. VK_F represents the ‘F’ key; VK_RETURN represents the key, etc.), perform a function (e.g.
Chapter 5: Configuration Scancode Remapping If the scancode is remapped to a function or a macro, the first and second columns remain blank while the third column contains the function name or macro key number (e.g., Macro 2). Adding A Remap To add a new remapping: • Choose the Add button at the bottom of the dialog box. The Remap Scancode dialog box is displayed. Figure 5.
Chapter 5: Configuration Scancode Remapping When Virtual Key is selected, you can choose to force to be on or off when the virtual key is sent. If No Force is selected, the shift state is dependent on whether the shift state is on or off at the time the virtual key is sent. When Function is selected, a list of valid functions appears in the dialog box. When Macro is selected, the macro keys available on your unit are listed in the dialog box. • Choose Virtual Key, Function or Macro.
Chapter 5: Configuration Volume And Sound Properties 5.5.3 Volume And Sound Properties Note: • The conditions under which hand-helds emit sounds are tailored from within the application installed on your unit. In the Control Panel, choose the Volume & Sounds icon. Figure 5.16 Choosing The Volume Icon 5.5.3.1 Volume Adjustments Figure 5.17 Volume Settings • Slide the volume button to the left to lower the beeper volume or to the right to increase the beeper volume.
Chapter 5: Configuration Sound • 5.5.3.2 Under the heading Enable sounds for, enable the conditions under which you want the 7535/7530 to emit a beep. Sound Figure 5.18 Sound Settings The 7530 hand-held computer is equipped with a sound port. This dialog box allows you to determine the sound file that will be emitted from this port. 5.5.4 Power Management Properties This icon displays a Power Properties dialog box that indicates the unit’s battery capacity and allows you to manage battery use.
Chapter 5: Configuration Battery Capacity 5.5.4.1 • Battery Capacity In the Power Properties dialog box, open the Battery tab to view battery details. Figure 5.20 Power Battery Properties 5.5.4.2 • Power Saving Schemes In the Power Properties dialog box, open the Schemes tab. Figure 5.21 Power Scheme Properties – AC Power And Battery Power Power Scheme This dropdown menu allows you to specify whether the unit is using AC Power or Battery Power.
Chapter 5: Configuration Suspend Threshold Switch State To Suspend Important: Psion Teklogix recommends setting the Suspend value to 10 minutes. Setting ‘Switch State To Suspend’ to ‘Never’ will adversely affect the battery run time. To further reduce power consumption, carefully consider the duration of time that the display backlight is ‘on’ (see “Display Backlight” on page 95).
Chapter 5: Configuration Charger 5.5.4.4 Charger Figure 5.23 Charger Tab Tapping in the checkbox next to Allow Battery Calibration allows the battery to be recalibrated only when necessary if the unit is inserted in a Combo Docking station. 5.5.4.5 Card Slots This tab enables or disables power to individual CF, PC Card and SDIO slots in the unit. Figure 5.24 Card Slot Activation Remember to tap on the Apply button and then tap on OK to save your changes.
Chapter 5: Configuration Stylus Properties 5.5.5 Stylus Properties Note: • Touchscreen calibration may not be enabled on your unit. If your screen appears to require recalibration, contact your supervisor. In the Control Panel, choose the Stylus icon. Figure 5.25 Stylus Icon 5.5.5.1 • Setting Double-Tap Sensitivity In the Double-Tap tab, follow the directions to tailor the sensitivity of the stylus when you tap on the touchscreen. Figure 5.
Chapter 5: Configuration Touchscreen Calibration 5.5.5.2 Touchscreen Calibration Touchscreens rarely require recalibration. However, if your touchscreen has never been calibrated or if you find that the stylus pointer is not accurate when you tap on an item, follow the directions below. • Choose the Calibration tab, and then tap on the Recalibrate button. Figure 5.27 Calibrating The Touchscreen • 5.5.5.3 Follow the directions in the Calibration tab to recalibrate the screen.
Chapter 5: Configuration Certificate Assignment 5.5.6 Certificate Assignment • In the Control Panel, choose the Certificate icon. Figure 5.28 Certificates Icon This dialog box is used in conjunction with 802.1x authentication to enhance 7535/7530 security. Figure 5.29 Certificates Dialog Box For a detailed description about Certificate setup for both the server and client-side devices (7535/7530s), refer to the following website: www.microsoft.com/windows2000/techinfo/planning/walkthroughs/default.
Chapter 5: Configuration Bluetooth Setup 5.6 Bluetooth Setup Bluetooth is a global standard for wireless connectivity for digital devices and is intended for Personal Area Networks (PAN). The technology is based on a short-range radio link that operates in the ISM band at 2.4 GHz. When two Bluetooth-equipped devices come within a 5 meter range of each other, they can establish a connection.
Chapter 5: Configuration The Devices Tab 5.6.1 The Devices Tab Figure 5.31 The Bluetooth Device Tab Scan • Click on the Scan button to list available devices. Figure 5.32 Available Bluetooth Devices Wait for the 7535/7530 to complete its scan (approximately 20 seconds). When scanning starts, the Scan button will change to Stop – if necessary, you can tap on this button to stop the process.
Chapter 5: Configuration The Devices Tab Note: During the scanning process, addresses are located first, followed by names. Only the names of devices that are within the Bluetooth radio coverage range will be retrieved. The Active column indicates whether any service is activated for that device. When a service is activated, the device is displayed in the list even when it is not detected during the scan. The PIN column indicates whether you have a PIN (password) set for the device.
Chapter 5: Configuration The Devices Tab the Bluetooth manager will try to find and use a free port between COM7 and COM9. When using BSP as the port name, BSP2 to BSP9 are available for use. The port is available as soon as it is activated. Note: The CH column shows the RFCOMM channel of the service if the service is RFCOMM-based. This information is not generally needed except for debugging purposes. To add a service to the Outgoing port, an active service must first be deactivated.
Chapter 5: Configuration The Servers Tab If the 7535/7530 attempts to connect to a remote device that has Authentication enabled and does not have a required PIN set, an Authentication Request dialog box appears. • Enter the PIN, and tap on OK to connect the devices. 5.6.2 The Servers Tab Figure 5.33 The Server Tab The Bluetooth connection is initiated from your 7535/7530 to the remote device – therefore the 7535/7530 is called the ‘client’ and the remote is called the ‘server’.
Chapter 5: Configuration Outgoing Tab 5.6.3 Outgoing Tab Figure 5.34 The Outgoing Tab Outgoing Port acts as a serial port that can be used to connect to a list of Bluetooth devices (one at a time), but you have the freedom to switch on-the-fly. The Outgoing Port checkbox allows you to create the Outgoing port. When the port is created, the Outgoing tab lists the port name. The Outgoing list dialog box displays a list of services marked as ‘Outgoing’. The * column indicates the currently selected service.
Chapter 5: Configuration Active Conn. Tab 5.6.4 Active Conn. Tab Figure 5.35 The Active Conn. Tab The Active Conn. tab lists the Name, Address, and Type of the currently active connections. The table is periodically updated, but it can take a few seconds before it reflects the actual list of connections. The Type column of the table shows ‘ACL’ or ‘SCO’. The Connection list table shows the connections for scanning as well as the service connections.
Chapter 5: Configuration The Properties Tab 5.6.5 The Properties Tab Figure 5.36 The Properties Tab The Properties tab displays information about your 7535/7530, and provides some port options. The Device Name field shows the device name of your 7535/7530. This name can be changed (see the Note on the previous page for details). Device Class shows the Class of Device (e.g. desktop, hand-held), which is always set to Handheld. Local Bluetooth Address shows the address of your 7535/7530 radio.
Chapter 5: Configuration The Bluetooth GPRS Phone 5.6.6 The Bluetooth GPRS Phone 1. To set up the internet parameters, choose the Network And Dial-up Connections icon from the Control Panel. Figure 5.37 Network And Dial-up Connection Icon 2. Choose the Make New Connection icon. Figure 5.
Chapter 5: Configuration The Bluetooth GPRS Phone 3. In the Make New Connection dialog box, choose Dial-Up Connection. Enter a name for your GPRS network connection. Figure 5.39 Setting Up The Connection 4. Choose the Next button to display the Modem dialog box. Figure 5.40 Setting Up The Modem 5. In the dropdown menu labelled Select a modem, choose the name of the modem with which you want to connect, and then choose the Configure button to display the Device Properties dialog box.
Chapter 5: Configuration The Bluetooth GPRS Phone The 7535/7530 communicates with your phone and retrieves the parameters for the Device Properties dialog box. The 7535/7530 then disconnects. Figure 5.41 Port Settings 6. Under the Call Options tab, turn off Cancel the call if not connected within, and press to save your changes. Figure 5.
Chapter 5: Configuration The Bluetooth GPRS Phone 7. In the Modem dialog box, choose the Next button to display the Phone Number dialog box. Figure 5.43 Setting The Phone Number The phone number you enter is network carrier dependent. Once you’ve specified all the necessary information, choose the Finish button. 8. In the Control Panel, choose the Dialing icon. Figure 5.
Chapter 5: Configuration The Bluetooth GPRS Phone 9. The values in the Dialing Properties dialog box need to be edited according to your network carrier specifications. Figure 5.45 Setting Up Dialing Properties Once you’ve edited this dialog box to reflect your network carrier requirements, press to save your changes. 10. At this point, you’ll need to return to the Control Panel, and choose the Network and Dial-up Connections icon. 11.
Chapter 5: Configuration The Bluetooth GPRS Phone This onscreen message indicates the status of your connection – connected, disconnected, error messages, and so on. Figure 5.47 Successful Connection • Select the Hide button to move this message to the background. You can now access the internet. Figure 5.
Chapter 5: Configuration Total Recall 5.7 Total Recall Total Recall is a Psion Teklogix utility developed to maintain applications and setting over cold boots. This utility is based on a backup and restore concept. • In the Control Panel, choose the Total Recall icon Figure 5.49 Total Recall Icon 5.7.1 Creating A Backup Profile Figure 5.
Chapter 5: Configuration Creating A Backup Profile • Choose the Next button to begin the process. Figure 5.51 Profile Details Profile Information This dialog box lists the possible storage destinations for the profile file. • To begin, type a name for the profile in the field labelled Profile Name. The image type – OS Version and Registry Type for the 7535/7530 is also listed here. • Choose this icon Profile Location. to expand your settings for AutoRetore Profile and Figure 5.
Chapter 5: Configuration Creating A Backup Profile - Profile Location – allows the operator to specify where the profile is to be saved. The location for the profile will typically be Flash or a Storage card. • Choose the Next button to display the next dialog box – Add Files. Add Files Figure 5.53 Adding Files By default, All Files is selected so that all installed or copied files, database entries, and the Registry will be saved. You can, however, limit the backup to database, and/or the registry only.
Chapter 5: Configuration Creating A Backup Profile • Choose this icon next to By File to view your options. Figure 5.54 By File Type Choosing By Individual File displays a pop-up menu where you can tailor the list of files you want to back up. Figure 5.55 Add Files To add a file to your backup list: • Choose Add Files. Browse to and choose the files you want to add to your list.
Chapter 5: Configuration Creating A Backup Profile Choosing By File Type allows you to select the file types that you want backed up. Figure 5.56 Adding Files By File Type View Selections Depending on what you have selected for inclusion in your profile, you can view a list of the selected files, databases and/or registry. Figure 5.57 Viewing Selections • Choose the Next button to perform the operation.
Chapter 5: Configuration Restoring A Profile Performing The Backup Figure 5.58 Performing The Backup • Choose the Backup To \Flash or \Storage Card button to start the process, and create a profile. 5.7.2 Restoring A Profile To manually restore a profile: • Choose Restore Selected Profile from the dropdown menu, and choose the Profile Name displayed in the drop down box. Note: You can also manually restore an auto restore profile located in flash or a storage device.
Chapter 5: Configuration IPv6 Support 5.8 IPv6 Support The IPv6 Support icon in the Control Panel allows you to activate IPv6 network support on your unit. This internet protocol specification (version 6) supports 128-bit IP addresses, replacing version 4. Figure 5.59 IPv6 Support Icon • Choose the IPv6 Support icon to display the associated dialog box. Figure 5.60 IPv6 Support Tab • Choose the checkbox next to Enable IPv6 Network Support to enable this internet protocol.
Chapter 5: Configuration Narrow Band Radio Setup — 7530 Only 5.9 Narrow Band Radio Setup — 7530 Only Keep in mind that the Narrow Band icon is only visible in the 7530 Control Panel when a Narrow Band radio is installed in the unit. Note too that this radio is not available for 7535 hand-helds. • In the Control Panel, tap on the Narrow Band Radio icon. 5.9.1 Info Tab In the Narrow Band Radio dialog box, the Info tab displays information about the radio – it cannot be edited. Figure 5.
Chapter 5: Configuration Info Tab These statistics are updated every second while the dialog box is displayed. Figure 5.62 Protocol Statistics The following table provides a brief description of these statistics: Statistic cq Description Channel quality. See the description of the “Channel Switch Speed” parameter in the channel tab for more information on how “cq” affects channel switching (see “Channel Switch Speed” on page 141).
Chapter 5: Configuration Info Tab Low Level Screen • Tap on the Low Level tab to display the Low Level statistics screen. Figure 5.63 Low Level Statistics Screen Table 5.2 defines the elements of the Low Level statistics screen.
Chapter 5: Configuration Channel Tab Default All Parameters • Tap on the Default all Parameters button to return all registry parameters to default values. When this button is pressed, a screen appears asking if you’re sure you want to return all parameters to their default values. • Note: Tap on the Yes button to return values to their default settings. This button does not default the radio parameters set under the Radio tab. 5.9.2 Channel Tab Figure 5.
Chapter 5: Configuration Channel Tab Power Up Channel When this parameter is enabled (checked), the 7530 begins communicating on the channel specified in the Channel Number parameter when the unit is powered up. This setting may prevent the migration of 7530s to the same channel due to uneven coverage in some sites. If this parameter is disabled (unchecked), the unit will continue communicating on the same channel that it was on before it was powered off.
Chapter 5: Configuration Channel Tab before searching for a new channel. If Channel Switch Speed is set to “Fast”, the current channel is only monitored for up to 2 time-out periods before channel switching begins. Important: “Fast” switch speed is most effective where coverage areas are largely overlapping. If the coverage areas barely overlap, have dead spots, or if the 7530 frequently operates on the fringe of coverage, this parameter should be set to “Slow”.
Chapter 5: Configuration Channel Tab This feature is used rarely. It is used when the order of channel switching needs to be tightly controlled. The values in the “Channel” column are completed for you with the enabled channels when this dialog box is opened. For each corresponding enabled channel, the “List” column contains “0,0,0,0,0,0,0,0” values by default. If communication quality falls below 46%, only the channels entered in the Manual Switch Table are considered for channel switching.
Chapter 5: Configuration Protocol Tab 5.9.3 Protocol Tab Figure 5.68 Protocol Tab Enable Cellular Protocol The value assigned to this parameter must be identical to the value assigned to the corresponding parameter in the Psion Teklogix Network Controller, Wireless Gateway or Base Station. A warm reset of the 7530 is required before this parameter can take effect.
Chapter 5: Configuration Protocol Tab Polling The default values for the Polling parameters are dependent on the value assigned to the Modulation / Baud Rate parameter in the Radio tab. Modulation / Baud Rate Sync Delay Window Delay Poll Timeout 4 Level / 19200 17 20 20 4 Level / 9600 17 23 25 2 Level / 9600 17 19 22 2 Level / 4800 25 23 37 Table 5.
Chapter 5: Configuration Power Tab Late TX Limit The value entered for this parameter (measured in milliseconds) sets the maximum allowable deviation time from the start of a response window during which an 7530 can make a transmission. After this threshold, the transmission will not be attempted and the 7530 will try again at the next opportunity. For example, suppose this parameter is set to 5. From the beginning of the response window, the 7530 can be up to 5 milliseconds late sending a transmission.
Chapter 5: Configuration Radio Tab Enable Power Saving When this parameter is checked, power saving is enabled. Idle Poll Limit Note: The “Idle Poll Limit” parameter is only used when “Enable Power Saving” is enabled. This parameter determines how many transmit opportunities – base station polls with available response windows – must be consecutively skipped before the 7530 places the radio into power-down mode for power saving. The allowable range for this parameter is from 1 to 200.
Chapter 5: Configuration Radio Tab Modulation/Baud Rate The options listed in the “Modulation / Baud Rate” dropdown menu are: 2 Level/4800, 2 Level/9600, 4 Level/9600 and 4 Level/19200. The value assigned to this parameter must be identical to the corresponding parameter in the Psion Teklogix Base Station. This parameter is stored in the radio’s non-volatile memory.
Chapter 5: Configuration Radio Tab Frequency Table • Tap on the Frequency button to display the Frequency Table dialog box. Figure 5.71 Frequency Table • Tap on the Copy “Receive” to “Transmit” button to copy the contents of the “Receive” fields into the corresponding “Transmit” fields. When you tap on this button, a warning box is displayed asking Copy all the Rx frequencies to the Tx frequencies? • Tap on the Yes button to go ahead or No to stop the copy process.
Chapter 5: Configuration Scanner Properties Setup 5.10 Scanner Properties Setup The Teklogix Scanners icon in the Control Panel provides dialog boxes in which you can tailor bar code options and choose the bar codes your scanner will recognize. Figure 5.72 Teklogix Scanner Icon 5.10.1 Bar Codes Figure 5.
Chapter 5: Configuration Bar Codes The Scanner The dropdown menu to the right of the Scanner option allows you to choose from one of the following scanner types used with your hand-held: Non-decoded, Decoded (internal), Decoded (Intermec ISCP), Imager and Decoded (external). The symbologies listed in the Barcodes tab change to reflect the scanner you choose and the bar codes it supports.
Chapter 5: Configuration Non-Decoded Scanners 5.10.2 Non-Decoded Scanners Figure 5.74 Non-Decoded Scanner Options • Tap on the Scanner dropdown menu, and choose Non-decoded. All the available bar code symbologies for this type of scanner can be selected in this tab. A ‘plus’ sign (+) to the left of the menu item indicates that a sub-menu of parameters is attached. • Tap the stylus on the + sign to display the sub-menu. • To change a parameter value, double-tap on the parameter.
Chapter 5: Configuration Non-Decoded Options 5.10.2.1 Non-Decoded Options • Tap the stylus on the + sign next to Options to display these parameters. Dot Time (msec) The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner switches to a normal scan sweep. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value from 0 to 3000. A value of 0 (zero) disables the target dot.
Chapter 5: Configuration Code 39 Include Check If this parameter is enabled, the check digit is included with the decoded bar code data. AIAG Strip If this parameter is enabled, the AIAG data identifier is removed from each decoded Code 39 label. The data identifier occurs in the first position next to the Code 39 start character. It can be a single alphabetic character or a series of numeric digits followed by an alphabetic character.
Chapter 5: Configuration Code 128 Prefix Char This character, if non-zero, is added before a successfully decoded bar code. Press the key you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of the keypress is displayed. Pressing the key in this dialog box resets the data to zero. Suffix Char Note: The appended character is treated as any other keyboard character. For example, if is pressed, the usual action for that key is performed.
Chapter 5: Configuration EAN 13 Variations When using Code 128, you can choose the bar code variation the scanner will recognize. The options available are Standard, UCC 128 and EAN/UCC 128. • Double-tap on Variations to display a dialog box listing your options. • Tap on a variation to highlight it, and then tap on OK. If you choose None, a check is not executed. Standard Enable Standard if “Code 128” is desired. UCC 128 UCC 128 is a variation of “Code 128”.
Chapter 5: Configuration EAN 13 Addendum Important: Before “Addendum” can take effect, the “Short Code” parameter (see page 153) must be enabled. An addendum is a separate bar code, supplementary to the main bar code. This parameter provides three options: Disabled, Optional and Required. Depending on the value chosen for this parameter, an addendum is recognized or ignored. • Double-tap on Addendum to display a dialog box listing your options. • Highlight an item, and tap on OK.
Chapter 5: Configuration EAN 8 Strip Trailing The value entered in this parameter determines the number of characters that will be removed from the end of the bar code before the suffix character is added. 5.10.2.5 EAN 8 Enabled Set this parameter to on to enable “EAN 8” or off to disable it. Include Check If this parameter is enabled, the check digit is included with the decoded bar code data.
Chapter 5: Configuration UPC E Prefix/Suffix Refer to page 157 for details. 5.10.2.7 UPC E Convert to UPC-A Setting this parameter to on results in a non-standard decoding that returns 12 digits from the 6 digit UPC E bar code. Include Number Sys If this parameter is enabled, the number system digit is included with the decoded bar code data. Include Check When enabled, the check digit is included with the decoded bar code data.
Chapter 5: Configuration Code 11 Field Size/Chars Refer to the description beginning on page 154 for details. 5.10.2.10 Code 11 Enabled Set this parameter to on to enable “Code 11”. Include Check If “Include Check” is enabled, the check digit is included with the decoded bar code data. Check Digit This parameter can be set to None, One Check Digit or Two Check Digits. • Double-tap on this parameter to display a dialog box listing your options.
Chapter 5: Configuration MSI Plessey Include Check If this parameter is enabled, the check digit is included with the decoded bar code data. Field Size/Chars Refer to the description beginning on page 154 for details. 5.10.2.12 MSI Plessey Enabled Set this parameter to on to enable “MSI Plessey”. One Check Digit If this parameter is enabled, it is assumed that the last digit is a check digit. Include Check If this parameter is enabled, the check digit is included with the decoded bar code data.
Chapter 5: Configuration IATA 2 of 5 Field Size/Chars Refer to the description beginning on page 154 for details. 5.10.2.14 IATA 2 of 5 Enabled Set this parameter to on to enable “IATA 2 of 5”. Mod 10 Check If this parameter is enabled, the Mod 10 check digit is calculated. ITF Check If this parameter is enabled, the ITF-14/16 Mod10 check digit is calculated. Include Check If this parameter is enabled, the check digit is included with the decoded bar code data.
Chapter 5: Configuration Options — Decoded (Internal) Scanner 5.10.3.1 Options — Decoded (Internal) Scanner Dot Time (msec) The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner switches to a normal scan sweep. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value of 0 msec, 200 msec or 400 msec. A value of 0 (zero) disables the target dot.
Chapter 5: Configuration Options — Decoded (Internal) Scanner “Linear security level 1” specifies that the following code types must be successfully read twice before being decoded: Code Type Length Codabar All MSI Plessey 4 or less D 5 of 5 8 or less I 2 of 5 8 or less “Linear security level 2” specifies that all types of codes must be successfully read twice before being decoded.
Chapter 5: Configuration Data Options — Decoded (Internal) Scanner Note: These parameters are only used when either Programmable Raster or Always Raster is assigned to the “2D Scanning Mode” parameter. “2D Raster Height” and “2D Raster Expand Rate” are intended for very specific applications and are usually not required for normal scanning purposes. Double-tapping on this parameter displays a dialog box in which you can enter a value from 1 to 15. 5.10.3.
Chapter 5: Configuration Code 39 When this parameter is enabled, the scanner transmits data from PDF417 and MicroPDF417 bar codes containing Character Set ECIs, even when the ECI Protocol is disabled. ECI Decoder Setting this parameter to on enables the scanner to interpret any Extended Channel Interpretations (ECIs) supported by the scanner. This parameter has no effect on symbols that were not encoded using ECIs.
Chapter 5: Configuration Code 39 Set Length L1 And Set Length L2 Lengths for “Code 39” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be decoded by your scanner. Figure 5.
Chapter 5: Configuration Code 128 Decode Performance If this parameter is enabled, one of three decode levels can be chosen in the “Decode Performance Level” parameter. Decode Perf. Level This parameter provides three levels of decode performance or “aggressiveness” for Code 39 symbols. Increasing the performance level reduces the amount of required bar code orientation – this is useful when scanning very long and/or truncated bar codes. Keep in mind that increased levels reduce decode security.
Chapter 5: Configuration EAN 13 When you double-tap on this parameter, a dialog box is displayed in which you can enter a decode performance level of between 1 and 3. Field Size/Chars Refer to page 154 for details. 5.10.3.5 EAN 13 Enabled Set this parameter to on to enable “EAN 13”. Prefix/Suffix See “Prefix/Suffix” beginning on page 157. 5.10.3.6 EAN 8 Enabled Set this parameter to on to enable “EAN 8”.
Chapter 5: Configuration UPC E UPC-A, Preamble When you double-tap on this parameter, a dialog box is displayed where you can choose one of three options for lead-in characters for UPC-A symbols transmitted to the host device: System Char – system character transmitted with the data, Country code and System Char – both the country code (“0” for USA) and system character are transmitted with the data or None – no preamble is transmitted. The lead-in characters are considered part of the symbol.
Chapter 5: Configuration UPC/EAN Shared Settings Conv. UPC-E1 To UPC-A This parameter converts UPC-E1 (zero suppressed) decoded data to UPC-A format before transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). Prefix/Suffix See “Prefix/Suffix” beginning on page 157. 5.10.3.9 UPC/EAN Shared Settings The parameters you set here are a shared across all available UPC and EAN bar codes.
Chapter 5: Configuration Codabar Security Level This parameter controls the tolerance for decoding edge-to-edge UPC/EAN bar codes. Double-tapping on this parameter displays a dialog box in which you can choose a level from 0 to 3. Lower values have a lower tolerance for misreads, but they also increase the time it takes to decode the bar code. Linear Decode “Linear Decode” applies to code types containing two adjacent blocks (e.g., UPC-A, EAN-8, EAN-13).
Chapter 5: Configuration Code 93 CLSI Editing When enabled, this parameter strips the start and stop characters and inserts a space after the first, fifth, and tenth characters of a 14-character Codabar symbol. Note: Symbol length does not include start and stop characters. NOTIS Editing When enabled, this parameter strips the start and stop characters from decoded Codabar symbol. Field Size/Chars Refer to page 154 for details. 5.10.3.11 Code 93 Enabled Set this parameter to on to enable “Code 93”.
Chapter 5: Configuration MSI Plessey Set Length L1 And Set Length L2 Lengths for “Interleaved 2 of 5” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be recognized by your scanner.
Chapter 5: Configuration Discrete 2 of 5 Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 6 to 55. Check Digits Double-tapping on this parameter displays a dialog box in which you can choose One or Two check digit(s).
Chapter 5: Configuration 2D PDF-417 Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 1 to 12. Field Size/Chars Refer to page 154 for details. 5.10.3.15 2D PDF-417 Enable Setting this parameter to on enables PDF-417 two dimensional (2D) coding.
Chapter 5: Configuration 2D RSS Code (Reduced Space Symbology) Field Size/Chars Refer to page 154 for details. 5.10.3.17 2D RSS Code (Reduced Space Symbology) Enable Setting this parameter to on enables “2D RSS Code” scanning capability. Enable RSS-14 RSS-14 code can be either purely linear or split in half with one half stacked on top of the other half. Stacking the code reduces the bar code length, and providing the nominal height of the code is maintained, it can be omni-directionally scanned.
Chapter 5: Configuration Decoded (Intermec ISCP) Enable CC-C And Enable CC-AB To activate these components, set the parameters to on. Enable TLC-39 This composite component integrates MicroPDF417 with the linear code. Setting this parameter to on enables this parameter. 5.10.4 Decoded (Intermec ISCP) Figure 5.77 Decoded Intermec Scanner • Tap on the Scanner dropdown menu, and choose Decoded (Intermec ISCP). 5.10.4.1 Code 39 Enable Setting this parameter to on enables “Code 39”.
Chapter 5: Configuration UPC A Field Size/Chars Refer to page 154 for details. 5.10.4.3 UPC A Enabled Set this parameter to on to enable “UPC A” bar code scanning recognition. Prefix/Suffix Refer to page 157 for details. 5.10.4.4 UPC E Enabled Set this parameter to on to enable “UPC E”. Prefix/Suffix Refer to page 157 for details. 5.10.4.5 EAN 8 Enabled Set this parameter to on to enable “EAN 8”. Prefix/Suffix See “Prefix/Suffix” beginning on page 157. 5.10.4.
Chapter 5: Configuration Interleaved 2 of 5 Addendum Refer to “Addendum” on page 157. 5.10.4.8 Interleaved 2 of 5 Enabled Set this parameter to on to enable “Interleaved 2 of 5”. Field Size/Chars Refer to page 154 for details. 5.10.4.9 Discrete 2 of 5 Enabled Set this parameter to on to enable “Discrete 2 of 5”. Field Size/Chars Refer to page 154 for details. 5.10.4.10 Code 11 Enabled Set this parameter to on to enable “Code 11”. Field Size/Chars Refer to page 154 for details. 5.10.4.
Chapter 5: Configuration Code 93 5.10.4.12 Code 93 Enabled Set this parameter to on to enable “Code 93”. Field Size/Char Refer to page 154 for details. 5.10.4.13 MSI Plessey Enabled Set this parameter to on to enable “MSI Plessey”. Field Size/Char Refer to page 154 for details. 5.10.5 Imager Figure 5.78 Imager • Tap on the Scanner dropdown menu, and choose Imager.
Chapter 5: Configuration Options – Imager 5.10.5.1 Options – Imager Dot Time (msec) The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner switches to a normal scan sweep. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value of between 0 and 3000. A value of 0 disables the target dot. Center Bar Code Only Note: This parameter must be disabled when reading Composite bar codes.
Chapter 5: Configuration Code 39 Max Gain, Max Integration And Max Illumination Important: These parameter values should only be changed by qualified Psion Teklogix personnel. These parameters represent internal units used by the Symagery imager. The “Auto Exposure” parameter automatically adjusts the “Max Gain”, “Max Integration” and “Max Illumination” parameters to produce the best bar code read.
Chapter 5: Configuration Codabar Addendum Refer to “Addendum” on page 157. Prefix/Suffix Refer to page 157 for details. 5.10.5.5 Codabar Enabled Set this parameter to on to enable “Codabar”. Field Size/Char Refer to page 154 for details. 5.10.5.6 Code 93 Enabled Set this parameter to on to enable “Code 93”. Field Size/Char Refer to page 154 for details. 5.10.5.7 Interleaved 2 of 5 Enabled Set this parameter to on to enable “Interleaved 2 of 5”. Field Size/Chars Refer to page 154 for details. 5.10.
Chapter 5: Configuration Postal: Japanese 5.10.5.9 Postal: Japanese Enabled Set this parameter to on to enable “Postal: Japanese”. Field Size/Chars Refer to page 154 for details. 5.10.5.10 Postal: Korean Enabled Set this parameter to on to enable “Postal: Korean”. Field Size/Chars Refer to page 154 for details. 5.10.5.11 Postal: PlaNET Enabled Set this parameter to on to enable “Postal: PlaNET”. Field Size/Chars Refer to page 154 for details. 5.10.5.
Chapter 5: Configuration 2D DataMatrix 5.10.5.14 2D DataMatrix Enabled Set this parameter to on to enable “2D DataMatrix”. Field Size/Chars Refer to page 154 for details. 5.10.5.15 2D Maxicode Enabled Set this parameter to on to enable “2D Maxicode”. Field Size/Chars Refer to page 154 for details. 5.10.5.16 2D PDF-417 Enabled Set this parameter to on to enable “2D PDF-417”. Field Size/Chars Refer to page 154 for details. 5.10.5.
Chapter 5: Configuration 2D RSS Code 5.10.5.19 2D RSS Code Enabled Set this parameter to on to enable “2D RSS Code”. Field Size/Chars Refer to page 154 for details. 5.10.5.20 Aztec Enabled Set this parameter to on to enable “Aztec”. Field Size/Chars Refer to page 154 for details. 5.10.5.21 Composite A composite symbol includes multi-row 2D components making it compatible with linear and area CCD scanners along with linear and rastering laser scanners.
Chapter 5: Configuration Decoded (External) 5.10.6 Decoded (External) Figure 5.79 Tether And Console Port Settings While you cannot configure the scanner, you can configure communications with a serial decoded scanner using the options in this tab. 5.10.6.1 Tether Port Figure 5.
Chapter 5: Configuration Tether Port Baud Double-tapping on this parameter displays a pop-up window in which you can choose an appropriate baud rate. Figure 5.81 Tether Port Baud Rates Data Bits This parameter determines the number of bits for the data going through this port. Double-tapping on this option displays a pop-up window in which you can choose either 7 or 8 data bits. Parity This parameter determines the type of parity checking used on the data going through the tether port.
Chapter 5: Configuration Console Port 5.10.6.2 Console Port Figure 5.83 Console Port Settings Enabled This parameter must be set to on in order for the 7535/7530 to recognize the device connected to the console port. Baud Refer to page 189 for details. Data Bits Refer to page 189 for details about this parameter. Parity For details, refer to page 189. Stop Bits Refer to page 189 for details about “Stop Bits”.
Chapter 5: Configuration Options Tab 5.10.7 Options Tab This tab allows you to tailor the double-click parameters and the display options associated with your scanner. Figure 5.84 Options Tab Double Click Parameters Click Time (msec) This parameter controls the maximum gap time (in milliseconds) for a double-click. If the time between the first and second clicks of the scanner trigger is within this time, it is considered a double-click. The allowable range is 0 to 1000.
Chapter 5: Configuration Options Tab Display Parameters Scan Result When this parameter is enabled, the type of bar code and the result of the scan appear on the screen. Note that this information is only displayed after a successful decode and is visible only while the scanner trigger is pressed. When the trigger is released, this information is cleared from the screen. Scan Indicator When this parameter is enabled, the laser warning logo appears on the display whenever the scanner is activated.
Chapter 5: Configuration Translations 5.10.8 Translations Figure 5.85 Translation Tab • In the Translation tab, choose the Add button. Figure 5.86 Translation Dialog Box Input This value is compared with the decoded bar code reading. If there is a match, the “Output” string is translated into the decoded bar code. Output If there is a match between the decoded bar code and the corresponding “Input” string, the decoded bar code will be translated into the “Output” string.
Chapter 5: Configuration SNMP (Simple Network Management Protocol) Setup Type The value chosen from this dropdown menu determines what is compared with the decoded bar code reading – the beginning of decoded bar code, the end of decoded bar code, the entire decoded bar code or anywhere within the decoded bar code (default). 5.
Chapter 5: Configuration Contact Tab 5.11.1 Contact Tab The SNMP dialog box is displayed. Figure 5.88 Contact Tab Contact This field identifies the contact person for this managed node along with information about how to get in touch with this person. The content of this parameter is accessible through MIB-II’s sysContact object. Location This parameter is used to identify the physical location of this node (e.g., Warehouse A: Pillar 32B).
Chapter 5: Configuration Communities Tab 5.11.2 Communities Tab Figure 5.89 Community Settings The “Communities” tab provides a means of limiting access to SNMP managed devices to those SNMP Managers with matching “community names”, as specified by RFC 1157. Enable SNMP Enabling Enable SNMP allows the device to respond to SNMP queries and to send Traps. After enabling this option and rebooting the device, the SNMP Agent will automatically start up.
Chapter 5: Configuration Adding A Community 5.11.2.1 Adding A Community • Choose the Add button to add a new ‘community’. Figure 5.90 Adding A Community Name The value assigned here is the name assigned by the network administrator to the set of devices to which this managed node belongs.
Chapter 5: Configuration Modifying A Community Setting 5.11.2.2 Modifying A Community Setting To modify an existing community: • Highlight the community you want to alter. • Choose the Change button. Figure 5.91 Changing Or Removing A Community A Modify Community dialog box is displayed, listing the community you highlighted. • Edit the Name and/or Rights, and press to save your changes. 5.11.2.
Chapter 5: Configuration Trap Destination Tab 5.11.3 Trap Destination Tab A trap is an unsolicited report sent to SNMP Managers by the SNMP Agent running on the managed node. This option allows you to define where the report will be sent. Figure 5.92 Trap Destination Tab 5.11.3.1 Enabling Authentication TRAPS Enabling Enable Authentication TRAPS allows authorization traps to be sent when a failure is detected (e.g., an SNMP message received with a bad community name). 5.11.3.
Chapter 5: Configuration Changing A Destination 5.11.3.3 Changing A Destination To change an existing trap destination: • Highlight the destination you want to alter in the Trap Destination tab, and then choose the Change button. A dialog box like the one displayed when you add a destination is displayed. Figure 5.94 Changing A Destination • Make the changes to the destination, and press to save the changes. 5.11.3.
Chapter 5: Configuration Permitted Hosts Tab 5.11.4 Permitted Hosts Tab For security reasons, the Network Administrator may want to restrict SNMP-node access to a known sub-set of SNMP Managers. This tab lists the IP addresses of all the SNMP Managers which are allowed to monitor and manage this device. If no entries are listed, the device will accept SNMP queries from any host. Figure 5.95 Permitted Hosts Tab 5.11.4.1 Adding A Host To add a new host: • Highlight the Add button, and press .
Chapter 5: Configuration Changing A Host 5.11.4.2 Changing A Host To change an existing host IP address: • Highlight the IP address you want to alter in the Permitted Hosts tab, and then choose the Change button. A dialog box like the one displayed when you add a host is displayed. • Make the necessary changes, and press . 5.12 Wireless WAN A 7535/7530 equipped with a GSM/GPRS or CDMA/1xRTT radio provides wide area networking capabilities. 5.12.
Chapter 5: Configuration Establishing A Connection When a packet data service is available, a letter is added to the signal strength icon, indicating the type of packet service – G for GSM/GPRS or X for CDMA/1xRTT. The next icon provides example of what you might see. A GPRS packet data connection is active, the signal strength is between 41% and 60% and GSM.GPRS packet service is available. The signal strength icon is replaced by a connection indicator icon when a packet data connection is started.
Chapter 5: Configuration Establishing A Connection The main Wireless WAN dialog box is displayed. Figure 5.98 Establishing A Connection Note: If you are prompted to enter a PIN, refer to “Entering A PIN Number” on page 206 for details. When Ready to connect is displayed in the Status field, the Connect Data button is enabled. • Tap on the Connect Data button. The progress of the connection is tracked in the Status field.
Chapter 5: Configuration Disconnecting From A Network When the connection state reaches PPP link to modem active, the taskbar icon changes to indicate an active connection. The Connect Data button changes to Disconnect. Figure 5.99 Connection Established 5.12.3 Disconnecting From A Network To disconnect from the network: • Tap the stylus on the Disconnect button, and then on OK. When the 7535/7530 network connection is severed, the Status field displays Ready to connect.
Chapter 5: Configuration Advanced Information 5.12.4 Advanced Information In most cases, when a GSM/GPRS radio and SIM are installed in your 7535/7530, setup is automatic. Follow the steps outlined under the heading “Establishing A Connection” on page 203 to make a connection. The information in this section is for advanced setup purposes. 5.12.4.1 Entering A PIN Number If a PIN is required, a PIN entry dialog box is displayed. • Note: Type your PIN, and press .
Chapter 5: Configuration Error States 5.12.4.2 Error States The following temporary error states (i.e., these states may disappear without interaction) may be displayed: • Emergency calls only The modem has found a network but is not allowed to register (e.g. no roaming agreement between networks). The modem keeps searching for another network. • No network found A network is not currently available. The modem continues searching for a network.
Chapter 5: Configuration Tools Menu 5.12.5 Tools Menu The Tools menu in the main Wireless WAN dialog box offers some additional, advanced setup features. Figure 5.100 Tools Menu 5.12.5.1 Data Connection Configuration Figure 5.101 Data Configuration If the Enable automatic connect: checkbox is checked (unchecked by default), the Wireless WAN user interface will attempt to establish a GPRS connection whenever GPRS is available (e.g. after resume from suspend without further user interaction).
Chapter 5: Configuration Data Connection Configuration While automatic connection mode is enabled, the Connect Data button in the main Wireless LAN dialog box changes to Disable Auto. To close the currently active connection (if any) and disables the automatic connection mode: • Tap on Disable Auto. Important: Automatic connection mode should not be used if applications other than the Wireless WAN user interface (e.g. Connection Manager) are expected to open and close connections.
Chapter 5: Configuration Data Connection Configuration Default profile uses parameters from a built-in database. The home network (the network that issued the SIM) is used for the database look-up. While there can be many configured profiles, only one profile can be active at any time. If connection profiles are configured manually, the Enable automatic configuration: checkbox should normally be unchecked. In one particular use case, manually configured profiles may be combined with automatic configuration.
Chapter 5: Configuration Data Connection Configuration New Tapping on the New button allows you to create a new profile. Figure 5.102 Creating A New Profile The name of the newly created profile must be different from all existing profiles. Also, the name cannot be Default. When the New Data Profile dialog box is opened, a proposal for a unique name is filled in the corresponding entry field.
Chapter 5: Configuration Security Configuration Advanced IP Figure 5.103 Assigning IP Information The Advanced IP button in the Show Profile and Edit Profile dialog boxes opens another dialog box that allows you to configure a static IP address as well as the IP addresses for the primary and secondary DNS server. 5.12.5.2 Security Configuration The Security Configuration dialog box is accessed through the Tools menu. Note: Security configuration is not available with CDMA modems.
Chapter 5: Configuration Network Configuration If unauthorized access to the device is a concern, the Require PIN on resume checkbox should be checked. In this case, the PIN is not stored; whenever a PIN is required, you will be prompted to enter an appropriate value. 5.12.5.3 Network Configuration Note: Network configuration is not available with CDMA modems. In the main Wireless WAN window: • Tap on the Tools menu, and choose Network.
Chapter 5: Configuration Driver Mode Configuration 5.12.5.4 Driver Mode Configuration Figure 5.104 Driver Mode By default, the Wireless WAN driver is enabled (the Enable driver: checkbox is checked). The driver must be disabled in order to use the modem for anything other than GPRS (e.g. dial-up data, fax, or in order to manually submit AT commands to the modem for development, testing, approvals, etc.).
Chapter 5: Configuration Modem Information 5.12.5.5 Modem Information Figure 5.105 Modem Data The fields in this dialog box cannot be edited – they only display information about the 7535/7530 modem. If the network operator has not programmed a user’s phone number into his SIM, the Phone: field remains empty. If the main menu shows an error status, at least partial modem information may be available.
6 TEKTERM APPLICATION 6.1 The Tekterm Application . . . . . . . . . . . . . . . . . . . . . . 6.2 Additional Keyboard Functions. . . . . . . . . . . . . . . . . . . 6.2.1 Function Keys And Softkeys . . . . . . . . . . . . . . . . . 6.2.1.1 7535 Function Keys . . . . . . . . . . . . . . . . . 6.2.1.2 7530 Function Keys . . . . . . . . . . . . . . . . . 6.2.1.3 Softkey Function Keys. . . . . . . . . . . . . . . . 6.2.2 Macro Keys . . . . . . . . . . . . . . . . . . . . . . . . . . 6.
Chapter 6: Tekterm Application 6.7.5.3 Closing A Session . . . . . . . . . . . . . . . 6.7.5.4 Printing A Screen . . . . . . . . . . . . . . . 6.7.5.5 Smart Echo – Disabling . . . . . . . . . . . . 6.8 The Radio Statistics Screen . . . . . . . . . . . . . . . . . . 6.9 The Tekterm Startup Display Menu . . . . . . . . . . . . . . 6.10 Working With Menus. . . . . . . . . . . . . . . . . . . . . 6.10.1 Using The Keyboard To Navigate Through Menus . . 6.10.1.1 Sub-Menus . . . . . . . . . . . . . . . . . . 6.
Chapter 6: Tekterm Application 6.18 View Manager . . . . . . . . . . . . . . . . . . . . . . . . . 6.18.1 Split Screen . . . . . . . . . . . . . . . . . . . . . . . 6.18.1.1 Splitting And Displaying Screens . . . . . . . 6.18.1.2 Moving Between Split Screens. . . . . . . . . 6.18.1.3 Toggling Between Full & Split Screens . . . . 6.18.1.4 Using The Asterisk As A Wild Card . . . . . . 6.18.2 Custom Characters (Unicode™) . . . . . . . . . . . . 6.18.2.1 Creating A Unicode™ Character. . . . . . . . 6.18.2.
Chapter 6: Tekterm Application The Tekterm Application 6.1 The Tekterm Application Tekterm is a powerful emulation application ideally suited for real time data transaction applications associated with mainframes and servers. The 7535/7530 includes unique features that support Tekterm – a Psion Teklogix application that has the ability to maintain multiple simultaneous sessions with a variety of host computers. 6.
Chapter 6: Tekterm Application 7530 Function Keys Additional function keys – to – are colour coded in orange print above function keys to . To access function keys to : • Press the key followed by the appropriate function key. For example: To access function key , press the key followed by . To access function key , press followed by , and so on. To access function keys to , you’ll need to press to .
Chapter 6: Tekterm Application Softkey Function Keys 37-Key Keyboard Function Keys The 37-key keyboard is equipped with twenty function keys. Function keys to are located across the top of the keyboard and function keys to are located at the bottom of the keyboard. Additional function keys – to – are colour coded in orange print above function keys to . To access function keys to : • Press the key followed by the appropriate function key.
Chapter 6: Tekterm Application Macro Keys Note: The SAVE onscreen label only appears when a parameter value has been changed and has not yet been saved. 6.2.2 Macro Keys Important: Refer to “Keyboard Macro Keys” on page 101 for details about creating macros. 7535/7530 hand-helds are equipped with a series of macro keys that can be programmed to replace frequently used keystrokes, along with the function of executable keys like the key, the key, any function key and arrow key, and so on.
Chapter 6: Tekterm Application Changing The Screen Font Size 6.3 Changing The Screen Font Size To cycle through the available screen fonts: • Press . Note: If the security level for your 7535/7530 is set to User, font changes are governed by the “Font Change” parameter in the ‘User Persmissions’ menu. This parameter must be set to “Y” before the operator can use the above key combination to choose a different font. Refer to “Font Change” on page 259 for additional details. 6.
Chapter 6: Tekterm Application Using The Task Manager To Switch Between Applications Once you’re done: • Unlock the key. 6.4.1 Using The Task Manager To Switch Between Applications To display the Task Manager screen: • In the Start Menu, tap on Shortcuts followed by Task Manager. If you’re using the keyboard: • • Press <0> to display the Start Menu. Highlight Task Manager, and press , or Type the underlined alpha character – in this case, the letter t. Figure 6.
Chapter 6: Tekterm Application The Tekterm Status Area 6.5 The Tekterm Status Area Tekterm provides a status area just above the softkey labels. The status area indicates the operating condition of the hand-held. Figure 6.2 Status Area The security level assigned within the Tekterm application is displayed in the status area. One of the following is displayed – Supervisor or Teklogix. 6.6 TESS Emulation TESS (Teklogix Screen Subsystem) is the normal operating mode of Psion Teklogix computers.
Chapter 6: Tekterm Application Configuration 6.6.1 Configuration Note: Each TESS session must have a unique name assigned to it. The title you assign will be displayed in the Display Menu. The process of renaming an existing TESS session and adding a new session is described in the section titled, “Applications” on page 267. A unique number must be assigned in the “Terminal #” parameter for each TESS session. Refer to “Terminal #” in the section titled “TESS Settings” on page 285 for details. 6.6.
Chapter 6: Tekterm Application IBM 5250 Emulation Keys 6.6.4 IBM 5250 Emulation Keys The following keys allow the Psion Teklogix computer to better emulate the functions of a true IBM 5250 terminal. Note: These keys are active at all times in TESS applications. Key Function Key Sequence Cursor Movement Cursor moves to the first position in the next Field Advance input field. If already in the last field, the cursor or Tab (PgDn key) moves to the first input field on the screen.
Chapter 6: Tekterm Application TESS Edit Modes And Cursor Movement 6.6.5.1 TESS Edit Modes And Cursor Movement The TESS editing modes and cursor movements in each type of mode are described in the table below. Press f to enter field mode. In this mode, once data entry Field mode Fcursor mode Insert mode Replace mode Note: into a field has been completed, the entry cannot be changed without retyping the entire field.
Chapter 6: Tekterm Application Key Behaviour In TESS 6.6.5.2 Key Behaviour In TESS Field mode Replace mode Insert mode Fcursor mode • In a left justified field, the key erases all characters in the field and places the cursor in the left most position of that field. • In a right justified field, the key erases all characters in the field and places the cursor in the right most position of that field.
Chapter 6: Tekterm Application Key Behaviour In TESS 6.6.5.3 Key Behaviour In TESS Field mode Replace mode • In a left justified field, the key erases the character directly to the left of the cursor and then moves the cursor one position to the left. When the last character in the field is deleted, the field displays the value that it contained before it was modified, and the field is opened.
Chapter 6: Tekterm Application TESS Status Message Insert mode • In a left justified field, the function erases the character on which the cursor is positioned, unless it is at the right end of the character string; in this case, it erases the character to the left of the cursor. When the last character in a field is erased, the field remains empty, and any further functions in the empty field result in a keyboard error beep.
Chapter 6: Tekterm Application Lock Messages 6.6.7 Lock Messages When information is transmitted to the host computer, the keyboard locks to prevent further data entry until the 7535/7530 receives a reply. A locked state is indicated by either “LOCK-B” (base) or “LOCK-H” (host) in the lower left corner of the display. When the reply is received by the 7535/7530, the lock message disappears and the keyboard can be used again. 6.6.
Chapter 6: Tekterm Application The Local Menu 6.6.10 The Local Menu The host can store local procedures in the 7535/7530 for use when the unit is off-line. A menu of these procedures appears whenever is pressed (see “Figure 6.3” on page 235). • Press the function key corresponding to the procedure you want to perform. Local procedures will not function when the “Lcl Process” and “Queuing” parameters are disabled (see “Lcl Process – Save on Reset” on page 293 and “Queuing” on page 292).
Chapter 6: Tekterm Application Queuing Mode 6.6.12 Queuing Mode In some applications, queuing mode can decrease the computer lock time. In queuing mode, the host computer may send several pages to a 7535/7530 without waiting for a response. These pages are stored in a queue within the hand-held. The operator completes the entries on the first page and then, presses a function key. The 7535/7530 simultaneously transmits to the host and displays the next page in the queue.
Chapter 6: Tekterm Application Sending Data To The Host Once the 7535/7530 is configured, an ANSI operation can be selected from the startup “Display Menu”. 6.7.2 Sending Data To The Host Hand-helds running ANSI sessions transmit characters to the host as soon as they are typed. The 7535/7530 provides parameters that determine when the computer transmits characters to the host.
Chapter 6: Tekterm Application Block Mode (Local Editing) Psion Teklogix Key Equivalent VT220 Key Help Do - F17-F20 Find Insert Here Remove Select Previous Screen Next Screen - None Table 6.2 Psion Teklogix Keyboard And VT220 Equivalent Keys 6.7.4 Block Mode (Local Editing) Psion Teklogix 7535/7530s support “block mode” (or Local Editing). Application programs must be specifically written to support this mode.
Chapter 6: Tekterm Application Working With Sessions 6.7.5 Working With Sessions Important: 6.7.5.1 • Use only lowercase letters when entering commands at the “TCP >” prompt. Establishing A New Session Press , and type a lowercase a. At the TCP> prompt: • Type tel in lowercase letters followed by the Host Name or IP address. • Press . • Log in as usual to begin working with the new session. 6.7.5.
Chapter 6: Tekterm Application Printing A Screen 6.7.5.4 Printing A Screen To print each line of a screen with a CR/LF between each line: • Press , and type p. The screen will be printed using the port configured as “Print”. 6.7.5.5 Smart Echo – Disabling In some circumstances – like entering a password – you many want to temporarily disable “smart echo”, disguising the characters you type with ‘.’ (periods). • • Press , and type a ‘.’ (period).
Chapter 6: Tekterm Application The Radio Statistics Screen • In the Display menu, type the letter corresponding to the radio statistics screen. For example, in the sample screen below, you’d type d to display the radio statistics screen. 01 Display Menu A Parameters B TESS C ANSI D Radio 802.IQ Stats Screen 802.
Chapter 6: Tekterm Application The Radio Statistics Screen • rm number of unique received messages. • xm number of unique transmitted messages. • rb number of received beacons. This number should continuously increment. • xi number of initializations with the network controller. • ra number of received acknowledgements. (Normally, this number should match the value in xm.) • xa number of transmitted acknowledgements. (Normally, this number should match the value in rm.
Chapter 6: Tekterm Application The Tekterm Startup Display Menu • Q memory address of first message in receive queue (i.e. if 0 then the receive queue is empty). • AcQ number of messages that have been sent but not yet acknowledged by the Cellular Master (decimal). • TxQ number of messages waiting to be sent (decimal). 6.9 The Tekterm Startup Display Menu The values assigned to Tekterm parameters can be viewed and adjusted to optimize communication at the site in which a 7535/7530 is operating.
Chapter 6: Tekterm Application Working With Menus 6.10 Working With Menus The 7535/7530 offers two ways to navigate menus and choose values – you can use the keyboard, or you can select items by tapping a stylus on the screen. (Keep in mind that some 7535s are not equipped with touchscreens — in these cases, navigation will be limited to the keyboard.) There are four types of parameters: numeric, Y/N, alpha and string entry.
Chapter 6: Tekterm Application Numeric Parameters 6.10.1.2 Numeric Parameters Numeric parameters are displayed in reverse video. To increment or decrement a number: • Press the or arrow keys, or • Type the desired number in the field. Negative values are entered by typing a “-” (minus) sign and then the number. • Press . Each numeric parameter has a preset range of numbers assigned to it – for example, a preset range of 1 through 10.
Chapter 6: Tekterm Application String Entry Parameters are not displayed in reverse video.) The methods that can be used to enter information in string entry parameters are described in this section. In string entry parameters, the arrow, arrow, and keys have the following functions: • The and arrow keys move the cursor between entry fields in the direction of the arrow. • completes the entry field. • deletes the character to the left of the cursor.
Chapter 6: Tekterm Application Using The Touchscreen To Navigate Through Menus The cursor is now positioned to the right of the previously selected ASCII character. • Press the or arrow key to scroll through the ASCII characters, and select another character. Entering Information In A String Entry Field In addition to using the fixed set of ASCII values assigned to this type of parameter, you can also type text in a string entry field.
Chapter 6: Tekterm Application Numeric Parameters Returning To The Previous Menu • If the softkey labels are visible at the bottom of the screen, tap the stylus on the “PREV” (previous) softkey label. • If the softkey labels are not visible, you’ll have to press – the “PREV” function key. 6.10.2.2 Numeric Parameters Numeric parameters are displayed in reverse video. • To decrease the numeric value, tap the stylus on the left side of the number.
Chapter 6: Tekterm Application String Entry Parameters 6.10.2.5 String Entry Parameters You’ll need to use the keyboard to enter values in string entry fields. Refer to “String Entry Parameters” on page 245 for details. 6.10.3 Saving Changes To Parameters Whenever a parameter value is altered, the new value must be saved. To do this: • Press – the “SAVE” key. If you are using a touchscreen: • Tap the stylus on the “SAVE” softkey label.
Chapter 6: Tekterm Application The Parameters Menu A reset results in a complete reboot of the unit. All RAM memory contents are lost. The contents of the flash memory and memory card are preserved. When the 7535/7530 is reset, the screen displays the Psion Teklogix and Microsoft® Windows® CE .NET splash screen before displaying the startup desktop. 6.12 The Parameters Menu • At the ‘Display’ menu, type ‘a’ to display the Parameters menu.
Chapter 6: Tekterm Application Display Options 6.13 Display Options The ‘Display’ sub-menu is used to adjust your hand-held’s display properties. • Press to open the ‘Display’ sub-menu. 02 Display Backlight Ctrl Panel Contrast Ctrl Panel Range » » see text see text Double-tapping the “Backlight Ctrl Panel” parameter presents the Display Properties dialog box where you can adjust the background, appearance, backlight and contrast of your 7535/7530 display.
Chapter 6: Tekterm Application Radio Parameters Warning: Note: • Parameters should not be altered without a clear understanding of how they operate. Parameters that are incorrectly set can increase response time or cause communication difficulties. Generally, parameters are configured for each site during installation. Parameters can also be remotely modified using SNMP. Refer to “SNMP (Simple Network Management Protocol) Setup” on page 194 for details.
Chapter 6: Tekterm Application Radio Parameters • Press to display the ‘Radio’ sub-menu. 03 Radio 802.11 • Press to access the ‘802.11’ sub-menu. 04 802.11 DS SS 802.IQ v1 • » N » Set ‘802.IQ v1’ to ‘Y’ to activate these parameters. and press to display ‘802.IQ v1’ parameters. Range 05 802.IQ v1 Auto Radio Addr Y Y/N Radio Address 0 1-3840 Initial RTT 0 0-1000 Protocol Type 2457 1501-65535 802.IQ v1 When 802.IQ v1 is set to “Y”, the attached sub-menu of parameters is enabled.
Chapter 6: Tekterm Application System Parameters Initial RTT (Round Trip Time) Round trip time is the elapsed time between a hand-held computer transmission and an access point acknowledgement. Each 7535/7530 continuously adjusts the acceptable round trip time, calculating the average elapsed time over a number of transmissions. If an acknowledgement takes longer to receive than the average round trip time calculated, the computer will resend the transmission.
Chapter 6: Tekterm Application Keyboard 6.16.1 Keyboard Keyboard 04 Macro Ctrl Panel Indicators Softkeys Ctrl Panel » Y Y » 6.16.1.1 Macro Control Panel • Highlight Macro Ctrl Panel, and press or double-tap on this option to display the Macros tab in the Keyboard Properties dialog box. Figure 6.6 Macro Dialog Box Important: Refer to “Keyboard Macro Keys” on page 101 for detailed instructions about creating macros.
Chapter 6: Tekterm Application Softkeys 6.16.1.3 Softkeys Enabling (setting to “Y”) the “Softkeys” parameter displays softkey labels at the bottom of the screen to indicate the function of each softkey. To block the display of softkey labels, set this parameter to “N”. Softkeys are function keys which are programmed to execute specific actions when pressed. Refer to Table 6.1 on page 223 for a list of softkey labels. 6.16.1.
Chapter 6: Tekterm Application Audio 6.16.2 Audio 04 Audio Normal /windows/default/wav Error /windows/default/wav Scan Accept /windows/default/wav Scan Reject /windows/default/wav Sounds Ctrl Panel » see text The 7535/7530 emits a beep under a variety of conditions. The “Audio” menu above lists the conditions under which your hand-held will sound. Sounds Ctrl Panel This option displays the Volume & Sounds Properties dialog box.
Chapter 6: Tekterm Application Power Mgmt Ctrl Panel 6.16.3 Power Mgmt Ctrl Panel This menu item displays the Power Properties dialog box. Figure 6.9 Power Properties Dialog Box Important: Refer to “Power Management Properties” on page 109 for details about this dialog box. 6.16.4 User Permissions 04 User Permissions Screen Switch Y Font Change Y Exit N Range Y/N Y/N Y/N At User security level, the operator is restricted to a small group of parameters.
Chapter 6: Tekterm Application Windows Properties Font Change When “Font Change” is set to “Y”, operators at the User level can change the font size of their 7535/7530s. Pressing cycles through the available fonts. Exit If this parameter is set to “Y”, an operator with user level security can exit Tekterm by pressing . If “Exit” is set to “N”, the operator cannot exit Tekterm. 6.16.
Chapter 6: Tekterm Application Scanner Control Panel 6.17 Scanner Control Panel This menu item displays a Scanner Properties dialog box in which you can set up the particulars of your unit’s scanner performance, choose the bar codes which will be decoded, and so on. Figure 6.10 Scanner Properties Dialog Box Important: Refer to “Scanner Properties Setup” beginning on page 150 for details about setting up your scanner. 6.
Chapter 6: Tekterm Application Split Screen Block Cursor When this parameter is enabled (set to “Y”), the cursor is presented as a flashing block. When “Block Cursor” is set to “N”, the cursor is presented as a flashing underline character. Use increment When “Use increment” is enabled (set to “Y”) and the cursor is moved off the display, the screen contents shift by the values specified in the “X-increment” and “Y-increment” parameters.
Chapter 6: Tekterm Application Splitting And Displaying Screens 6.18.1.1 Splitting And Displaying Screens Before splitting the screen, you need to determine which applications should appear in each pane of the split screen. The available applications are listed in the main “Display Menu”. Each application listed in the “Display Menu” is preceded by a letter – for example, Parameters is preceded by an A.
Chapter 6: Tekterm Application Moving Between Split Screens To display the split screen on the 7535/7530: • Press arrow. 6.18.1.2 Moving Between Split Screens To move the cursor from one pane in a split screen to the next: • Press or . The cursor moves in order from the left-most pane to the right and from the top-most pane to the bottom. 6.18.1.3 Toggling Between Full & Split Screens To toggle between a split and full screen format: • Press arrow.
Chapter 6: Tekterm Application Custom Characters (Unicode™) To change the application displayed in the pane with no fixed application: • If the cursor is not currently in the pane, press or arrow to move the cursor into the appropriate screen. • Press <0> to display the startup “Display Menu”. • Type the letter corresponding to the new application you want to display. 6.18.
Chapter 6: Tekterm Application Displaying The Unicode™ Pop-up Window • Press the or arrow keys until the character set you want to use is displayed. You can create up to 20 Unicode™ characters in the custom characters table. To create a Unicode™ value: • Replace the 0000 value with a hex value that represents the Unicode™ character you want to use. • Press the arrow key to accept the value and move the cursor to the next field.
Chapter 6: Tekterm Application Displaying The Unicode™ Pop-up Window To close the pop-up menu when you’re done: • Press the key. Font Override Font Override 04 Font Code 0 ... is font 18x32 Font Code 1 ... is font 18x32 Font Code 2 ... is font 10x26 Font Code 3 ... is font 18x32 Font Code 4 ... is font 8x20 This parameter is used to redefine the font to which 5 different font codes refer.
Chapter 6: Tekterm Application Applications 6.19 Applications “TESS” and “ANSI” applications require unique names so that several different sessions of “TESS” and “ANSI” can operate simultaneously. 7535/7530s can support up to 8 sessions at one time. 03 Applications Type1 #1 ANSI Title1 #1 parts Settings 1 » . . .
Chapter 6: Tekterm Application ANSI Settings 6.19.1 ANSI Settings Ansi 04 Auto Term # Terminal # Host Conn Screen Xmit Modes Kbd Modes Edit Modes Serial Host Char Set Anchor View N» 1 » » » » » » » N» Range see text 1..1024 see text see text see text see text see text see text see text see text Each session you create has its own “Settings” parameters. Additional ANSI information is documented in “ANSI Emulation” on page 236. Auto Term# Note: Refer to “Group” on page 268 for additional instructions.
Chapter 6: Tekterm Application Host Conn Other applications running in the 7535/7530, such as a TESS session or another ANSI session must each have a different number. In addition, each Psion Teklogix 7535/7530 using the radio link must have a unique number. 6.19.1.1 Host Conn Host Conn Conn Type Telnet Settings » Range 802.
Chapter 6: Tekterm Application Host Conn Host This parameter is used to assign a host IP address using the format ###.###.###.### or a host name if DNS is used. Port “Port” specifies the 9010t (TCP Direct) or Telnet port number. The default 9010t port number assigned is 9999, the maximum allowable value. The default Telnet port number assigned is 23 with a maximum allowable value of 32767. Terminal Type “Terminal Type” is used to inform the server of the type of terminal the hand-held is emulating.
Chapter 6: Tekterm Application Host Conn 4. Hand-held responds with “Password”. 5. Host may send password echo. 6. Hand-held ignores password echo if “Password Echo” is set to “Y”, otherwise skip to step 7. 7. Hand-held looks for “Login Failed” in next transmission from host. 8. Login successful or Login failed and return to step 1. Login Prompt When the hand-held receives the string assigned to this parameter, it will respond with “Login”.
Chapter 6: Tekterm Application Host Conn Func Key Remap Setting this parameter to “Y” enables the hand-held to use remapped function keys. Each function key has a default string associated with it. When a function key is pressed, the corresponding default string is sent to the host. The ‘Func Key Remap’ table allows these function key character sequences to be redefined. 07 Func Key Remap F 1 1B 4F 50 00 00 00 00 F 2 1B 4F 51 00 00 00 00 F 3 1B 4F 52 00 00 00 00 . . .
Chapter 6: Tekterm Application Screen To change values: • Highlight the arrow key you want to remap. • Either type new values, or press the or arrow key to change the values. • Use the stylus, or press the key to move through the string of values. 6.19.1.2 Screen Screen 05 # of Pages 4 # of Rows 24 # of Cols 80 Default Font 17x30 80-col. Font 17x30 132-col. Font 17x30 Video » Label F1-F4 » Colour overrideN» Range 0..16 4..
Chapter 6: Tekterm Application Screen # of Cols This parameter defines the logical page width (in characters) used by the host computer application. Emulator systems trim the host application screens to this width. This page width cannot be smaller than the width of the display. Display panning is used if the page is wider than the display. Note: The value in this parameter must be an even number. Default font This parameter determines the default font that appears when the 7535/7530 memory is reset.
Chapter 6: Tekterm Application Screen Blink This parameter specifies the actual video attributes to be assigned to fields created with the “Blink” ANSI attribute. Reverse This parameter specifies the actual video attributes to be assigned to fields created with the “Reverse” ANSI attribute. Underline This parameter specifies the actual video attributes to be assigned to fields created with the “Underline” ANSI attribute. Label F1-F4 Note: This menu uses string entry fields.
Chapter 6: Tekterm Application Xmit Modes Colour Override Note: If you are using a 7535 equipped with a monochrome display, this menu is not available. Range 06 Colour Override Foreground Background Black White see text see text Foreground And Background When “Colour Override” is set to ‘Y’, the colours chosen in this menu are displayed in the ANSI sessions. These colour settings will override the “Default Colours” set from within the “View Manager” menu.
Chapter 6: Tekterm Application Xmit Modes Xmit Wait This parameter determines the length of time the 7535/7530 collects keystrokes before transmitting them to the host. This value is specified in increments of one 10th of a second (i.e., a value of 10 represents 1 second). If 0 (zero) is selected, the computer transmits only according to the “Xmit Count” parameter.
Chapter 6: Tekterm Application Xmit Modes Block Mode 06 Block Mode Kbd lock N Xmit key N FETM N GATM N MATM N SATM Y TTM Y EOL chars EOB chars All modes in this section affect the data stream sent to the host computer, the serial port and the console port. These modes apply to the Block mode (Local Editing) and the Media Copy function, unless otherwise noted. Consult the Teklogix ANSI Terminal Programmer’s Manual for more information.
Chapter 6: Tekterm Application Xmit Modes GATM When the Guarded Area Transfer Mode (GATM) parameter is disabled (set to “N”), only unguarded data is transmitted to the host or transferred to the console or serial ports. When enabled (set to “Y”), both guarded and unguarded data can be transmitted to the host or transferred to the console or serial ports.
Chapter 6: Tekterm Application Kbd Modes 6.19.1.4 Kbd Modes 05 Kbd Modes Arrow mode Echo mode DEL key BKSP key PrintScreen key Xmit Enter Insert Newline Disable kbd DEC Cursor Keys cursor Smart DEL BS 16 Y N N N cursor mode Range cursor, field Smart, Local, Host DEL, BS, Clear BS, Clear, DEL 1..255 Y/N Y/N Y/N Y/N see text Arrow mode This parameter determines whether arrow keys move the cursor within a field or between fields.
Chapter 6: Tekterm Application Kbd Modes Key Function ENTER In newline mode, this key moves the cursor to the first column of the next line. In line feed mode, this key moves the cursor to column one of the current line. CTRL-G (Bell) The 7535/7530 beeps. CTRL-H (Backspace) The cursor moves back one space. CTRL-I (Tab) The cursor moves to the next horizontal tab stop. CTRL-J (Line Feed) CTRL-L (Form Feed) CTRL-K (Vertical Tab) DEL The cursor moves down one line in the same column.
Chapter 6: Tekterm Application Kbd Modes Xmit Enter The key normally enters data into a field and moves the cursor to the next field. However, some applications require that the key start a transmission from the 7535/7530. When enabled (set to “Y”), this parameter causes the key to start a transmission.
Chapter 6: Tekterm Application Edit Modes 6.19.1.5 Edit Modes 04 Edit Modes Auto wrap Erasure mode Tab stop mode Edit extent Disp controls N N N Line N Range Y/N Y/N Y/N see text Y/N Auto wrap If “Auto wrap” is disabled (set to “N”), characters received when the cursor is at the right edge of the screen replace the previously displayed characters. If “Auto wrap” is enabled (set to “Y”), the cursor wraps to the next line when the current line is filled.
Chapter 6: Tekterm Application Serial 6.19.1.6 Serial 05 Serial Primary Port Secondary Port Async In Start End Any Available Any Available N 0 0 Range see text see text Y/N 0..255 0..255 Primary Port & Secondary Port ANSI print commands (such as ‘MC’ or Media Copy) control the transfer of data to and from the serial and console ports on the hand-held.
Chapter 6: Tekterm Application Anchor View • Press to save your selection to memory. Important: When a character sent from the host cannot be displayed, a rectangular box is used as a substitute. 6.19.1.8 Anchor View 05 Anchor x origin 1 y origin 1 Range 1..24 1..80 When enabled (set to “Y”), this parameter locks the display at a defined location on the screen, preventing it from shifting when the cursor is moved.
Chapter 6: Tekterm Application Host Conn. Auto Term# Note: “Auto Term#” is available when 802.IQv2 is assigned to the “Host Conn” parameter (page 286) or when 802.IQv1 is enabled in the Radio Menu (see “802.IQ v1” on page 253). When this parameter is set to “Y”, a unique unit number is assigned for the current TESS session. If “Auto Term#” is set to “Y”, any value assigned to the “Terminal #” parameter is ignored.
Chapter 6: Tekterm Application Screen Settings Note: The “Settings” sub-menu is not available when 802.IQv2 is selected as the “Conn Type” Settings Host Port Range see text 0-9999 9999 Host This parameter is used to assign a host IP address using the format ###.###.###.### Port “Port” specifies the port number. By default, the port is assigned the value 9999. 6.19.2.2 Screen 05 Screen # of Cols # of Rows Origin Scroll Field Scroll Pages Saved App.
Chapter 6: Tekterm Application Screen # of Rows This parameter defines the logical page length (in lines) used by the host computer application. Emulator systems trim the host application screens to this length. This page length cannot be smaller than the length of the hand-held computer’s display. Display panning is used if the page is longer than the display. Note: The value in this parameter must be an even number.
Chapter 6: Tekterm Application Characters Softkeys are function keys that have been programmed to perform specific actions in your application. These keys are identified through softkey labels – reverse video labels that are displayed at the bottom of the screen. These softkey labels can be reconfigured using the menu attached to the “Label F1-F4” parameter.
Chapter 6: Tekterm Application Characters Char Set 06 Char Set ISO N » IBM Y » DEC N » Misc. N » This menu contains all the character sets available with your Psion Teklogix computer. In this menu, the “Y” or “N” is used to visually guide you to the selected character set. For example, in the sample menu above, the “Y” next to IBM indicates that a character set has been chosen from this group.
Chapter 6: Tekterm Application Tests H Match Chr This parameter enables hidden field matching and defines the character that identifies hidden field match data from the host. Field matching allows the host to pre-load data into an entry field that is compared with the user’s input. The 7535/7530 beeps if the entered data does not match. Hidden field matching means that the data to be matched is not displayed in the entry field.
Chapter 6: Tekterm Application Features AutoRep T/O This parameter determines the time (in seconds) between the 7535/7530 unlocking and the next transmission of the function key specified by the above parameter. A value of zero disables auto reply mode. 6.19.2.
Chapter 6: Tekterm Application Features Lcl Process – Save on Reset The menu item “Local Process” has a sub-menu attached to it – “Save on Reset”. When this parameter is enabled (set to “Y”), data stored in the 7535/7530 is saved if the unit is reset. Local procedures are defined on page 235. Send Mile This parameter controls the sending of a milestone from the 7535/7530 after a “hey_you” command. Consult the Teklogix Screen Subsystem (TESS) User Manual for more information on milestones.
Chapter 6: Tekterm Application Features Serial 06 Serial Serial Port Serial Out Serial In SI mode SI prefix SI suffix SI CRC SI Fkey SO prefix SO suffix SO CRC Any Available Y N 10 13 N 0 10 13 N Range see text Y/N Y/N see text 0..255 0..255 Y/N 0..255 0..255 0..255 Y/N Serial Port TESS print commands control the transfer of data to and from the serial and printer ports on the 7535/7530.
Chapter 6: Tekterm Application Features SI prefix This parameter determines the start-of-message character on serial input. Enter an ASCII numeric equivalent from 0 to 255 to represent the start character. A value of 0 (zero) indicates no prefix. SI suffix This parameter determines the end-of-message character on serial input. Enter an ASCII numeric equivalent from 0 to 255 to represent the end character. A value of 0 (zero) indicates no suffix.
Chapter 6: Tekterm Application Scanner SO CRC When this parameter is enabled (set to “Y”), a CRC16 value is appended to the serial output message. Also, when this parameter is enabled (set to “Y”), for each control character in the serial output stream, a DLE is inserted to precede that character. The control character is replaced with its 1’s complement. 6.19.2.
Chapter 6: Tekterm Application Fields Mixed AIAG When this parameter is enabled (set to “Y”), AIAG labels are always accepted and processed – even if mixed with keyboard input. The AIAG label can replace the partially entered keyboard data. If this parameter is disabled, AIAG labels are rejected if field entry is in progress. Rjct if Alpha When the cursor is in a numeric field and “Rjct if Alpha” is enabled (set to “Y”), bar codes containing alphabetic characters are rejected.
Chapter 6: Tekterm Application Fields Enter To F0 The key normally enters data into a field and moves the cursor to the next field. However, some applications require that the key start a transmission from the 7535/7530. When enabled (set to “Y”), this parameter causes the key to be interpreted as which starts a transmission. Enter On Arr When this parameter is enabled (set to “Y”), the arrow keys can be used to complete data entry into a field.
Chapter 6: Tekterm Application Fields Default font This parameter determines the default font that appears when the memory is reset. • Use the or arrow key to scroll through the options. Entry Mode “Entry Mode” parameters allow you to select a data entry mode. The modes are: insert, replace, field and fcursor. “TESS Edit Modes And Cursor Movement” on page 230 describes these modes in detail.
Chapter 6: Tekterm Application Anchor View 6.19.2.8 Anchor View Anchor 05 x origin y origin 1 1 Range 1..24 1..80 When enabled (set to “Y”), this parameter locks the display at a defined location on the screen, preventing it from shifting when the cursor is moved. The “x origin” and “y origin” coordinates specify where the screen origin, the upper left corner of the screen, will be fixed.
Chapter 6: Tekterm Application Emulation Features – 2392/Telnet Features 06 Clear Entry Fields N Passthru Printing N AIAG Character 0 Barcode Character 0 Serial IO Character 0 Fixed Field Ovrhd 5 Enable Alarm N Command Region Up 0 Command Region Down 0 Command Region Left 0 Command Region Right0 Range Y/N Y/N 0-255 0-255 0-255 0-80 Y/N 0-24 0-24 0-80 0-80 Clear Entry Fields When this parameter is set to ‘Y’, an empty entry field is created in place of an entry field filled with spaces.
Chapter 6: Tekterm Application Emulation This parameter is used to enter a decimal representation of the ASCII character code of the barcode-input-only character. A value of 0 (zero) disables this feature. Serial IO Character Serial I/O fields are special entry and fixed fields that accept input from and output to a serial port. The application program distinguishes this field as Serial I/O by preceding the field with a special character.
Chapter 6: Tekterm Application Emulation 3274/Telnet Emulation Emulation 05 Fujitsu Host Intl EBCDIC Nulls in Fields IP for SysReq BRK for Attn LU Name Enabled LU Name Features FKEY0-7 FKEY8-15 FKEY16-23 FKEY24-31 FKEY32-39 N N N N N N » » » » » » Range Y/N Y/N Y/N Y/N Y/N Y/N see text see text see text see text see text see text see text Fujitsu Host If this parameter is set to ‘Y’, data is sent in Fujitsu format.
Chapter 6: Tekterm Application Emulation BRK for Attn When the attention key is pressed, a Telnet “Break” command is generated. This command is sent to the host in place of the standard mechanism used to send the attention key press to a host using Telnet. LU Name Enabled If enabled (set to ‘Y’), this parameter allows the 7535/7530 to negotiate a specific device name for itself. LU Name The value assigned in this field is used when the “LU Name Enabled” parameter (see above) is set to ‘Y’.
Chapter 6: Tekterm Application Emulation FKEY0-7, FKEY8-15, FKEY16-23, FKEY24-31 And FKEY32-39 06 FKEY0-7 FKEY0 FKEY1 FKEY2 FKEY3 FKEY4 FKEY5 FKEY6 FKEY7 ENTER F1 F2 F3 F4 F5 F6 F7 The sub-menus attached to these parameters allow you to map the 7535/7530 function keys.
Chapter 6: Tekterm Application Emulation Remap Underline To This parameter allows you to remap the underline cursor to: blink, bold or reverse. Intl EBCDIC If this parameter is enabled (set to ‘Y’), the ‘international’ EBCDIC character set is used, swapping the positions of the ! and ] characters. Nulls In Fields Setting this parameter to ‘Y’ allows ‘null’ characters – e.g., hyphens (-) or periods (.) – to fill in empty entry fields.
Chapter 6: Tekterm Application Emulation Features – 5250/Telnet 06 Features Clear Entry Fields Passthru Printing AIAG Character Barcode Character Serial IO Character Fixed Field Ovrhd Enable Alarm Command Region Up Command Region Down Command Region Left Command Region Right Range N N 0 0 0 5 N 0 0 0 0 Y/N Y/N 0-255 0-255 0-255 0-80 Y/N 0-24 0-24 0-80 0-80 These parameters are identical to those described for 2392/Telnet. Refer to “Features – 2392/Telnet” beginning on page 301.
Chapter 6: Tekterm Application Ports — Tether And Console 6.20 Ports — Tether And Console 03 Ports Tether Port Settings 1 Console Port Settings 2 PR RS232 Settings 3 PR Tether Settings 4 Console » Disabled » Console » Console » 6.20.1 Peripheral Port Options The “Tether Port”, “Console Port” “PR RS232” and “PR Tether” options allow you to enable, disable and specify the accessories attached to these ports. These are: Disabled, Serial, Console, Printer and Scan-See.
Chapter 6: Tekterm Application Port Parameter Settings 6.20.2 Port Parameter Settings The parameters for the “Tether Port”, “Console Port”, “PR RS232” and “PR Tether” are identical. 04 Settings Character Set Baud Data Bits Parity Stop Bits Flow Ctrl Buffer Retries Input Tmo Output Tmo Shared Test » 9600 8 none 1 None 512 3 2 5 N N Range see text see text for range of baud rates 6..8 none odd even mark space 1, 1.5, 2 None Software Hardware Both 1..2048 1..100 1..100 1..
Chapter 6: Tekterm Application Port Parameter Settings Choosing A Character Set To choose a character set: • Position the cursor on the appropriate item – for example, ISO – and press to display the character set options. • To activate a character set, press the or arrow key to set it to “Y”. Important: If you choose a Chinese character set from the ‘Misc.’ menu and a character sent from the host cannot be displayed on the screen, a shaded box character is used as a substitute.
Chapter 6: Tekterm Application Port Parameter Settings Print: Used to output data only. All input characters except XON and XOFF are ignored. Supports XON/XOFF or no handshaking. Output: Used to output data only. All input characters are ignored. Supports no handshaking. Note: To enable the input and/or output, ‘serial in’ and/or ‘serial out’ must be enabled in the TESS menu.
Chapter 6: Tekterm Application Port Scan-See Parameters 6.20.3 Port Scan-See Parameters When ‘Scan-See’ is specified as the peripheral for a port, the parameters listed under the “Scan-See” sub-menu are used to tailor the operation of this type of scanner. The other parameters listed in this menu – “Character Set”, “Baud” and so on – are identical to those described beginning on page 308.
Chapter 6: Tekterm Application Scan-See Sub-Menu – Mapping The Viewport Anchor Line/Anchor Column A location on the Scan-See display – the anchor – is chosen as a reference point. Line Offset/Column Offset A predefined displacement – the offset – is added to the location of the 7535/7530 cursor to create a point – the pivot . This pivot is mapped to the anchor , and whatever is displayed in its vicinity is also displayed on the Scan-See.
Chapter 6: Tekterm Application Scan-See Sub-Menu – Mapping The Viewport 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 . . . 0 1 (0,0) terminal cursor 2 3 4 (7,5) +4 5 offs 6 anchor (0,0) (4 +2 (11, 7) 8 ,2) et +2 9 0 1 2 3 4 5 6 7 8 9 0 et 7 +4 offs (9,0) 10 pivot = Scan-See Display terminal + cursor offset ... 11 1 Terminal Display superimposing the anchor on the pivot 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 . . .
Chapter 6: Tekterm Application Scan-See Sub-Menu – Mapping The Viewport Follow Cursor When the “Follow Cursor” parameter is disabled (set to “N”), the cursor is always assumed to be located at the origin. Using the previous example: • the area displayed will be (4–9,2–0) to (4–9+9, 2–0+1), or, after clipping values that are negative or higher than 80: (0,2) to (4,3).
Chapter 6: Tekterm Application Scan-See Keyboard Mapping Arrows The “Arrows” parameter assigns one of three possible functions to the two arrow keys on the Scan-See keyboard: Value Function Bright Arrow keys control Scan-See display brightness. Horiz Arrow keys control “Column Offset”. Vert Arrow keys control “Line Offset”. Table 6.5 “Arrow” Parameter Options Note: For “Horiz” and “Vert,” changing the offset will take affect only after the 7535/7530 display has been updated.
Chapter 6: Tekterm Application Network • The three F-keys are mapped to F1, F2 and F3, respectively. • The ENT key is mapped to the carriage-return (‘\r’) character. • The two arrow keys are handled locally, and control the brightness, and the line and column offsets, as described on page 315. • Bar-code data is stripped off any identifying headers (symbology, etc.) and passed verbatim. The Scan-See is capable of displaying only a subset of the default PC-8 ASCII character set.
Chapter 6: Tekterm Application 802.IQ v2 6.21.2 802.IQ v2 Important: For setup information about 802.IQ v2, refer to the “9400 and 9450 Network Controllers User Manual” and/or the “9150 Wireless Gateway User Manual”. Range 04 802.IQ v2 Port 8888 see text More Parameters » see text Port “Port” specifies the UDP port used by 802IQ v2. The default value is 8888. Keep in mind that the value assigned here must match the value set at the network controller. Note: When using 802.
Chapter 6: Tekterm Application 802.IQ v2 Initial RTT (Round Trip Time) Round trip time is the elapsed time between a 7535/7530 computer transmission and an access point acknowledgement. Each 7535/7530 continuously adjusts the acceptable round trip time, calculating the average elapsed time over a number of transmissions. If an acknowledgement takes longer to receive than the average round trip time calculated, the 7535/7530 will resend the transmission.
PERIPHERAL DEVICES & ACCESSORIES 7 7.1 External Bar Code Readers. . . . . . . . . . . . . . . . . . . . . . . . . . 323 7.1.1 PowerScan™ Standard, LR and XLR Bar Code Scanners . . . . . . 323 7.1.2 Entering Data With The Bar Code Reader. . . . . . . . . . . . . . . 323 7.2 Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323 7.2.1 Lithium-Ion Battery Safety Precautions . . . . . . . . . . . . . . . . 323 7.3 Important Charger Safety Instructions . . . . . . . . . . . . . . .
Chapter 7: Peripheral Devices & Accessories 7.7.4 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333 7.8 Quad Dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333 7.8.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333 7.8.2 Indicators And Controls . . . . . . . . . . . . . . . . . . . . . . . . 334 7.8.3 Using The Quad Dock . . . . . . . . . . . . . . . . . . . . . . . . . 334 7.8.4 Network Access . . . . . . . . . . . . . . . .
Chapter 7: Peripheral Devices & Accessories External Bar Code Readers 7.1 External Bar Code Readers 7.1.1 PowerScan™ Standard, LR and XLR Bar Code Scanners Note: Refer to “PowerScan™ Standard Range Scanner Specs” on page 368 and “PowerScan™ LR and XLR Industrial Scanner Specs” on page 366 for detailed specifications. The 7535/7530 supports Psion Teklogix’ PowerScan™ industrial bar code scanner with standard, long range and extra long range options.
Chapter 7: Peripheral Devices & Accessories Lithium-Ion Battery Safety Precautions Psion Teklogix Inc. Psion Teklogix Corp. 2100 Meadowvale Blvd. 1810 Airport Exchange Blvd. Mississauga, Ontario Suite 500 Canada Erlanger, Kentucky L5N 7J9 USA 41018 Psion Teklogix S.A. La Duranne; 135 Rue Rene Descartes; BP 421000 13591 Aix-En-Provence Cedex 3; France Warning: TO PREVENT the battery from leaking acid, generating heat or exploding, adhere to precautions listed below.
Chapter 7: Peripheral Devices & Accessories Important Charger Safety Instructions • • • Do not store the battery in extremely high temperatures (e.g., a vehicle, strong direct sunlight, etc.). This may cause the battery to overheat or ignite, and it may also reduce the performance and service life of the battery. Do not use in areas where static electricity is greater than what the manufacturer guarantees. Keep batteries out of reach of children. 7.
Chapter 7: Peripheral Devices & Accessories Chargers • • • Do not place batteries in the charger if they are cold from extended exposure to a freezer or outside temperatures below 10°C (50°F). Allow them to warm up to temperatures for at least two hours. Battery temperature should be between 5° C and 39° C (41° F to 102° F). Do not use the charger if, after an overnight charge, any of the batteries feel warmer than the charger housing. The charger should be inspected by qualified service personnel.
Chapter 7: Peripheral Devices & Accessories Installation 7.5.1 Installation The gang charger can be wall mounted using the wall mount kit – PN 1010039 – or it can be operated on a flat surface. Install the charger in an area that is free from excessive dirt, dust and contaminants. The ambient temperature must be in the range 5° C to 39° C (41° F to 102° F). The charger will not charge batteries outside of this temperature range.
Chapter 7: Peripheral Devices & Accessories Charging Batteries Flashing yellow Battery temperature out of charge range between 5° C to 39° C (41° F to 102° F). This icon indicates that the charger is waiting to charge. Charging is attempted every five minutes until the battery is within the appropriate temperature range. Solid red Battery rejected (at insertion) or unable to complete charge on battery Flashing red Charging circuit problem. Refer to “Troubleshooting” on page 328. Table 7.
Chapter 7: Peripheral Devices & Accessories Indicator Flashing Red 7.5.5.2 Indicator Flashing Red If the indicator flashes red: • • Remove all batteries and disconnect the mains power cable. Wait at least 20 seconds, and then plug the cable in again. If any of the charge slot LEDs continue to flash red, the charger is defective and requires service. If all indicators are flashing red, there is a power supply problem and the charger requires service. 7.5.5.
Chapter 7: Peripheral Devices & Accessories Installation 7.6.1 Installation Keep the combo charger away from excessive dirt, dust and contaminants. The combo charger will not charge batteries outside an ambient temperature range of 5° C to 39° C (41° F to 102° F). It is recommended that this charger be operated at room temperature – between 18° C and 25° C (64° F to 77° F) for maximum performance. After unpacking the unit: • • Visually inspect the charger for possible damage.
Chapter 7: Peripheral Devices & Accessories Charge Indicators The combo charger stops applying power to the battery when it is fully charged – there is no risk of overcharge if the battery remains in the charge slot. The 75% charge indicator is handy if you need a quick recharge – a quick charge often takes less than one hour. 7.6.5 Charge Indicators The spare battery charge slot has an associated tri-colour LED indicator on the lower-right area of the front panel.
Chapter 7: Peripheral Devices & Accessories Combo Dock 7.7 Combo Dock The combo dock is identical to the combo charger with one exception – the combo dock is equipped with a 10/100 BaseT Ethernet interface. The charging information in “Combo Charger” beginning on page 329 also applies to the combo dock. 7.7.1 Installation Refer to the “Installation” guidelines for the combo charger beginning on page 330.
Chapter 7: Peripheral Devices & Accessories Troubleshooting 7.7.4 Troubleshooting Troubleshooting issues for the combo dock are identical to those of the quad dock. Refer to “Troubleshooting” on page 335 for helpful tips. 7.8 Quad Dock Note: The quad dock is shipped with a user manual. It is critical that this manual be reviewed for additional information and updates. The Quad Dock permits each of four docked 7535/7530 hand-helds to communicate with a 10/100 BaseT Ethernet network at greater than 2Mbps.
Chapter 7: Peripheral Devices & Accessories Indicators And Controls 7.8.2 Indicators And Controls The quad dock has no user controls. It is equipped with a power indicator LED and RJ45 link and traffic indicator LEDs. When a valid network link is established, a green LED is illuminated next to the RJ45 connector. 7.8.3 Using The Quad Dock • Gently slide the 7535/7530 into the cradle portion of the quad dock until lightly latched.
Chapter 7: Peripheral Devices & Accessories Troubleshooting 7.8.6 Troubleshooting The indicators, applications and drivers required to use and monitor the docking station are installed on the 7535/7530 – no indicators or applications are present on the docking station itself. 7.8.6.1 Network Link Unsuccessful If a network link fails, the 7535/7530 application alerts the operator that the link was unsuccessful. 7.8.6.
Chapter 7: Peripheral Devices & Accessories Portable Docking Module (PDM) Note: The latching mechanism on the PDM is designed for quick installation and release. It is not meant for heavy duty use. Psion Teklogix recommends using a powered cradle or combo charger in harsh environments. Align the guide pins on the PDM with the slots on the base of the 7535/7530, and gently snap the PDM onto the hand-held. Guide Pins Figure 7.
Chapter 7: Peripheral Devices & Accessories Portable Docking Module (PDM) Type B USB Device RS232 Serial Port Type A USB Host 15 VDC Power Jack Figure 7.2 PDM Ports And Connectors The interfaces available on the PDM are as follows: • • • • DC power jack (15VDC @ 2.5A) Type A USB host port (for connection to USB devices such as a mouse, keyboard, printer, etc.
Chapter 7: Peripheral Devices & Accessories Bluetooth Peripherals 7.10 Bluetooth Peripherals If the 7535/7530 is equipped with a Bluetooth radio, it is possible to communicate with a variety of Bluetooth peripherals, including GSM/GPRS handsets, scanners, printers, and so on. The range of the Bluetooth radio in the 7535/7530 is limited to approximately 5 meters. Psion Teklogix provides built-in support for the Bluetooth peripherals listed below.
Chapter 7: Peripheral Devices & Accessories Picker Cradle Mounting Recommendations 7.11.1 Picker Cradle Mounting Recommendations Warning: Before mounting a picker cradle in a vehicle, there are a number of operator safety issues that require careful attention. An improperly mounted cradle may result in one or more of the following: operator injury, operator visibility obstruction, operator distraction and/or poor ease of egress for the operator.
Chapter 7: Peripheral Devices & Accessories Using The Picker Cradle • • • • • Protect cable runs from pinching, overheating and physical damage. Use grommets to protect cables that pass through metal. Use plastic straps and tie-downs to secure cables and connectors in their desired location, away from areas where they may get snagged or pulled. Keep cables away from heat sources, grease, battery acid and other potential hazards.
Chapter 7: Peripheral Devices & Accessories Powered Cradle Installation Due to the hazardous voltages present on these vehicles, it is necessary to ensure that the powered cradle power supply cable connector is not accessible to the vehicle operator, and does not get exposed to water or other liquids.
Chapter 7: Peripheral Devices & Accessories Wiring Vehicle Power To The Cradle This grounding strap ensures that if there is a fault in the vehicle wiring or in the picker cradle power module, the picker cradle cannot be at a hazardous voltage with respect to the vehicle chassis. Connection between the picker cradle ground lug and the vehicle chassis should be done with a 16 gauge ground strap (ground wire).
Chapter 7: Peripheral Devices & Accessories The Port Replicator 7.11.7 The Port Replicator The port replicator is an optional accessory that allows tethered devices (e.g., scanners) as well as mounted peripherals (e.g., bar code printers or weigh scales) to be attached to the picker cradle. The replicator can be used with or without the cradle power option. The functionality of the 7535/7530 tether port is duplicated on the port replicator.
8 SPECIFICATIONS 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 7535 Hand-Held Computer Specifications . . . . . . . . . . 7530 Hand-Held Computer Specifications . . . . . . . . . . Radio Specifications . . . . . . . . . . . . . . . . . . . . . Internal Scanner Port . . . . . . . . . . . . . . . . . . . . . Bar Code Applications . . . . . . . . . . . . . . . . . . . . RFID Applications . . . . . . . . . . . . . . . . . . . . . . Internal Scanners . . . . . . . . . . . . . . . . . . . . . . . External Scanners . . .
Chapter 8: Specifications 7535 Hand-Held Computer Specifications Note: Performance specifications are nominal and subject to change without notice. 8.1 7535 Hand-Held Computer Specifications Size • 4" (102mm) width x 2.5" (62.5mm) depth x 9.6" (244mm) length • Keypad area: 3" (75.5mm) width x 1.4" (36mm) depth Weight With battery 21.7 oz (700g) With pistol grip add 4.3 oz (125g) Operating System Microsoft® Windows® CE .NET Version 4.
Chapter 8: Specifications 7535 Hand-Held Computer Specifications Communication Ports Environmental Guaranteed Operating Temperature Range Storage Temperature Rain And Dust Resistance Humidity Drop Durability Approvals Safety EMC Laser Tether port (optional) with: - one RS232 serial port (decoded scanner, printer) undecoded scanner port USB host port, power out - Docking station port with: one RS232 serial port including diagnostics USB device port, USB host port, power in/out 32°F to 122°F (0°C to +5
Chapter 8: Specifications 7530 Hand-Held Computer Specifications 8.2 7530 Hand-Held Computer Specifications Size • • 3.94" (100mm) width x 3.35" (85mm) depth x 10.6" (270mm) length 3.03" (77mm) width x 1.70" (43mm) depth at grip area Weight With std. battery, std. radio & std. internal scanner With pistol grip 34 oz (950g) add 4.3 oz (125g) Operating System • Microsoft® Windows® CE .NET Version 4.
Chapter 8: Specifications 7530 Hand-Held Computer Specifications Docking station port with: - one RS232 serial port including diagnostics - USB device port - USB host port - Power in/out Internal Expansion Slots • • • One SDIO (MultiMediaCard) slot One Type II Comp[act Flash slot One Type III Extended PC Card slot Environmental Standard Operating Temperature Range: - -10°C to +60°C (14°F to 140°F) Freezer Operating Temperature Range: - -30°C to +60°C (-22°F to 140°F) Storage Temperature: - -40°C to +60°C
Chapter 8: Specifications Radio Specifications Approvals Safety EMC Laser UL 1950, CSA C22.2 No950, LVD EN60950 FCC Part 15 Class B, EMC Directive Class B IEC 60825-1 2001 Class 2 (EN60825-1) *Note this product will carry the CE Mark. 8.3 Radio Specifications 802.11b Direct Sequence Spread Spectrum Transmit Power Frequency Range Channels Data Rates 100mW max for USA 50mW max for EU countries 2.400-2.474 for USA, Canada 2.400-2.484GHz for EU 1 to 11 for USA, Canada 1-13 for EU countries 1,2,5.
Chapter 8: Specifications Internal Scanner Port 8.4 Internal Scanner Port Compatibility Symbol: SE 1200HP 1D non-decoded, standard range SE 1200LR 1D non-decoded, long range SE 1200ALR 1D non-decoded, advanced long range SE 1200 WA non-decoded wide angle SE 2223 PDF decoded raster SE1224 1D decoded with fuzzy logic processing SE 923 1D short range decoded with RFID SE 1524 ER decoded with fuzzy logic processing, extended range Intermec: E1022 decoded Linear 1D imager scanner Symagery: SX5303 2D imager 8.
Chapter 8: Specifications Internal Scanners 8.7 Internal Scanners Base Options High performance, long range, advanced long range, wide angle, imager scanner and 2-D raster laser scanner. If an aiming dot is available on the installed scanner, the aiming dot will be enabled for a configurable time period after which normal scanning begins. Double-clicking trigger will override aiming delay and initiate immediate scan. Scan Triggering 8.8 External Scanners Supported Types Decoded and Non-Decoded 5V only.
Chapter 8: Specifications SE 1200 High Performance & Long Range Specs 8.9.1 SE 1200 High Performance & Long Range Specs Parameter Light Source SE 1200HP SE 1200LR Visible Laser Diode 650 nm 35 (± 5) scans/sec (bidirectional) 42º± 2º Linear Minimum 20% absolute dark/light reflectance measured at 650 nm UPC/EAN, Code 128, Code 39, Code 93, 1 2 of 5, Discrete 2 of 5, Codabar, MSI UCC/EAN 128, TriOptic Code 39.
Chapter 8: Specifications SE 1200 Advanced Long Range & SE 2223PDF Specs 8.9.2 SE 1200 Advanced Long Range & SE 2223PDF Specs Parameter Light Source Scan Rate Scan Angle Scan Patterns SE 1200ALR Visible Laser Diode 650 nm 35 (± 5) scans/sec (bi-directional) 13º± 2º Linear Minimum 40% absolute Minimum Print Contrast dark/light reflectance measured at 650 nm Symbologies UPC/EAN, Code 128, UCC/EAN 128, RSS, Code 39, Code 93, I 2 of 5, Discrete 2 of 5, Codabar, MSI.
Chapter 8: Specifications Decode Zones Parameter Shock Output Power (peak) SE 1200ALR SE 2223 PDF 2000 G 1.35mW 2000 G 0.86mW Table 8.2 SE 1200ALR & SE 2223 PDF Scanner Specifications 8.9.2.1 Decode Zones Bar Code Read Distance High Performance Min Max 5 mil 7.5 mil 10 mil 15 mil 20 mil 40 mil 3.0" 3.0" 2.5" 2.5" 2.5" 3.0" 4.5" 8.5" 12.5" 18.5" 20.5" 29.5" Advanced Long Range Min Max Long Range Min Max 13.0" 8.5" 9.5" 9.5" 17.5" 33.5" 20.0" 50.0" 38.5" 30.0" 60.0" 79.5" 30.0" 98.0" 115.
Chapter 8: Specifications SE 1224HP, SE 1200WA & SE 923HS 8.9.3 SE 1224HP, SE 1200WA & SE 923HS Parameter SE 1224HP Visible Laser Diode 650 nm 35 (± 5) scans/sec Scan Rate (bi-directional) 42º (typical), 30º Scan Angle (narrow) Scan Patterns Linear Minimum 25% absoMinimum Print lute dark/light reflectance measured at 650 Contrast nm UPC/EAN, Code 128, UCC/EAN 128, RSS, Symbologies Code 39, Code 93, I 2 of 5, Discrete 2 of 5, Codabar, MSI.
Chapter 8: Specifications Decode Zones Parameter SE 1224HP Humidity: Power: Input Voltage: Input Current: Standby Current: Shock Output Power (peak) SE 1200WA SE 923 5% to 95% noncondensing 5% to 95% noncondensing 5% to 95% noncondensing 5.0 VDC 140 mA typical 60 µA max. 3.0-5.5 VDC ± 10% 65 mA typical 50 µA max. 2000 G 2000 G 2000 G 1.35mW 0.48mW 0.94mW 3.0-5.5 VDC ± 10% 65 mA typical 8 µA max Table 8.5 SE 1224HP, SE 1200WA & SE 923 Scanner Specifications 8.9.3.1 Decode Zones Figure 8.
Chapter 8: Specifications Decode Zones Figure 8.2 SE 1200WA Decode Zone Figure 8.
Chapter 8: Specifications SE 1524ER – Extended Range Scanner 8.9.4 SE 1524ER – Extended Range Scanner Parameter Light Source Scan Rate Scan Angle Scan Patterns Minimum Print Contrast Symbologies Programmable Parameters Interfaces Ambient Light: Operating Temperature: Storage Temperature: Humidity: Power: Shock SE 1524ER Visible Laser Diode 650 nm 35 (±5) scans/sec (bi-directional) 13.5° ±0.7° Linear Minimum 25% absolute dark/light reflectance measured at 650 nm UPC/EAN, Code 128, UCC.
Chapter 8: Specifications Decode Zones 8.9.4.1 Decode Zones Figure 8.4 1524ER Decode Zone A Figure 8.
Chapter 8: Specifications Decode Zones Figure 8.
Chapter 8: Specifications Intermec E1022 Linear 1D Imager Scanner 8.9.5 Intermec E1022 Linear 1D Imager Scanner Parameter E1022 Optics Sensor Scan Rate Scan Angle Skew and Pitch Min. x Dimension Depth of Field Bar Code Width Print Contrast Symbologies Programmable Parameters Interfaces Ambient Light Operating Temperature Storage Temperature Humidity Power Shock 645 nm visible red top LED Bright and sharp scanning line CCD linear image sensor 270 scans/s auto-adaptive 48° +/-35° Down to 0.
Chapter 8: Specifications Depth Of Field – E1022 8.9.5.1 Depth Of Field – E1022 Bar Code Width Max. Distance on Code 39* inch cm inch 6.4 23.0 9.0 9.0 26.4 10.4 14.1 10.3 36.0 7 13.6 49.2 19.4 19.4 49.2 19.4 Max. Distance mm 0.1 0.2 mil 4 8 cm 16.2 23.0 0.3 12 26.2 0.5 1 20 40 34.5 49.2 Figure 8.8 E1022 Depth Of Field 8.9.6 Symagery SX5303 Imager Parameter SE SX5303 Optics Field of View at 6 inches Pitch Angle Skew Angle Ambient Light Minimum Contrast Targeting 1.
Chapter 8: Specifications Depth Of Field – SX5303 Parameter SE SX5303 Operating Temperature Relative humidity Storage temperature Shock -20° to 50 C (-4 to 122°F) 5% to 95% (non-condensing) -30 to 60°C (-22° to 140°F) 15 drops, 5 ft to concrete at room temperature when integrated correctly into end-user packaging Figure 8.9 SX5303 Imager Specifications 8.9.6.1 Depth Of Field – SX5303 Sample Symbologies Data Matrix 15 mil) Data Matrix 12 mil PDF417 15 mil PDF417 10 mil PDF417 7.
Chapter 8: Specifications External Scanner Specifications 8.10 External Scanner Specifications 8.10.1 PowerScan™ LR and XLR Industrial Scanner Specs Communication Undecoded Standard and Intermec-compatible. Mechanical Dimensions Weight Cable lengths 6.9 x 11.2 x 18.3 cm (2.7 x 4.4 x 7.2 in) Scanner - 280 g (9.9 ozs) Cable (82.3 cm 32 in) - 176 g (6.
Chapter 8: Specifications PowerScan™ LR and XLR Industrial Scanner Specs Depth of Field-Extra Long Range Paper Labels (decoded) 15 mil 28 to 60 in (71 to 152 cm) 20 mil 28 to 72 in (71 to 182 cm) 40 mil 28 to 144 in (71 to 144 cm) 55 mil 40 to 180 in (102 to 457) Reflective Labels (decoded) 40 mil 40 to 180 in (102 to 457 cm) 70 mil 80 to 300 in (2032 to 762 cm) 100 mil 80 to 432 in (203 to 1097 cm) Print Contrast Ratio Pitch Skew Ambient Light Immunity Environmental Temperature Rating Humidity Shock (a
Chapter 8: Specifications PowerScan™ Standard Range Scanner Specs 8.10.2 PowerScan™ Standard Range Scanner Specs Communication Undecoded Standard and Intermec-compatible. Mechanical Dimensions Weight 6.9 x 11.2 x 18.3 cm (2.7 x 4.4 x 7.2 in) Scanner - 280 g (9.9 ozs) Cable (82.3 cm 32 in) - 176 g (6.
Chapter 8: Specifications RD7950 Integrated UHF RFID Reader (7535 Only) Idling current - low power mode Environmental Temperature Rating Humidity Shock (at 23° C) Vibration Water and Dust Decoding Capabilities Auto-discriminates between: Safety/Regulatory Electrical Emissions Laser Classification Decoded: 100 mA @ 5 VDC < 50 µA @ 5 VDC Operating: -22° to 122° F (-30° to 50° C) Storage: -40° to 158° F (-40° to 70° C) 5 to 95% NC Withstands multiple 6 foot drops to concrete.
Chapter 8: Specifications RD7950 Integrated UHF RFID Reader (7535 Only) Read Distance Class 0, 2x2 tag Class 0, l1020 Class 0+ 4x4 Class 1 9238 Squiggle Class 1 9338 0 - 2.5 m (0 - 8 ft.) 0 - 3 m (0 - 10 ft.) 0 - 3.5 m (0 - 11 ft.) 0 - 2.5 m (0 - 8 ft.) 0 - 3.5 m (0 - 11 ft.) Read distance is highly dependant upon tag configuration, material to which the tag is applied, and the presence of metal and water around the tag. Metal and water will decrease read ranges significantly.
Chapter 8: Specifications 7535 1900 mAh Lithium-Ion Battery Pack 8.12 7535 1900 mAh Lithium-Ion Battery Pack Technology Operating Temperature Charge Temperature Storage Temperature Charge Cycles Charge Time Voltage Cell Configuration Capacity Supported Chargers Lithium-Ion (Li-Ion) -20°C to 60°C (-4°F to 140°F) 5°C to 39°C (41°F to 102°F) -30°C to 60°C (-22°F to 140°C) (Storage at elevated temperatures is not recommended.
Chapter 8: Specifications 7530 2400 mAh Lithium-Ion Battery Pack 8.14 7530 2400 mAh Lithium-Ion Battery Pack Technology Capacity Lithium-Ion (Li-Ion) 2400 mAh nominal at 300mA discharge 20°C to 8.5V (minimum) 2000 mAh nominal at 300mA discharge at -20°C to 8.
APPENDIX A SUPPORT SERVICES AND WORLDWIDE OFFICES Psion Teklogix provides a complete range of product support services to its customers worldwide. These services include technical support and product repairs. A.1 Technical Support Technical Support for Mobile Computing Products is provided via e-mail through the Psion Teklogix customer and partner extranets. To reach the website, go to www.psionteklogix.com and click on the appropriate Teknet link on the home page.
A.3 Worldwide Offices COMPANY HEADQUARTERS AND CANADIAN SERVICE CENTRE NORTH AMERICAN HEADQUARTERS AND U.S. SERVICE CENTRE Psion Teklogix Inc. 2100 Meadowvale Boulevard Mississauga Ontario Canada L5N 7J9 Psion Teklogix Corp. 1810 Airport Exchange Boulevard Suite 500 Erlanger, Kentucky USA 41018 Tel: Fax: Tel: Fax: +1 905 813 9900 +1 905 812 6300 Email: salescdn@psion.com Email: salesusa@psion.com INTERNATIONAL SUBSIDIARIES (see also www.psionteklogix.com) Psion Teklogix S.A.
APPENDIX B RD7950 INTEGRATED UHF RFID READER (7535 ONLY) The RD7950 Integrated UHF RFID Reader is an EPC-compliant 900MHz RFID reader available for the 7535 hand-held computer only. This RFID reader is compatible with EPC Class 0, 0+, and Class 1, as well as the ISO 18000-6 B protocol. B.1 Installation To install the RD7950 in the 7535 hand-held computer, first attach the pistol grip.
Appendix B: RD7950 Integrated UHF RFID Reader (7535 Only) Installation Attaching The Pistol Grip Note: A Phillips head screwdriver is required. Do not use adhesives such as Loctite to secure the screws. These chemicals may damage the plastic casing. The pistol grip is attached to the back of the 7535 hand-held computer using the four threaded inserts in the upper part of the 7535 casing. Four black #4-40 Phillips head screws are provided with this accessory.
Appendix B: RD7950 Integrated UHF RFID Reader (7535 Only) Installation Attaching The RD7950 • Push the plug through the pistol grip, with the hole in the plug towards the front • Attach the RD7950 to the 7535, securing it to the unit with the screws provided. • Thread the long screw through the pistol grip.
Appendix B: RD7950 Integrated UHF RFID Reader (7535 Only) Installation • Plug the RD7950 into the tether port. The RD7950 is now securely fastened to the 7535 hand-held.
Appendix B: RD7950 Integrated UHF RFID Reader (7535 Only) Enabling The RD7950 B.2 Enabling The RD7950 In the 7535, when the trigger source is selected for RFID usage, pressing the trigger causes a Scanning icon to appear on the hand-held screen. While this icon is displayed, the RD7950 is powered on and is actively probing for RFID tags. When the trigger is released, the image disappears, and the RD7950 is powered down.
APPENDIX C PORT PINOUTS C.1 Tether Port Pinout The tether port connector incorporates multiplexed undecoded scanner, decoded scanner, RS232 serial, and USB interfaces. In order for it to operate, a special wiring scheme is needed. If you have a need to create cables for the tether port, contact a Psion Teklogix representative and request document #1010032 “Instruction Tether Port Termination”.
Appendix C: Port Pinouts Battery Contacts 8. Docking Station Id. Identifies device attached to the docking station. Resistor between this pin and ground. 9. Ground. 10. USB Device Minus. When terminal operated as a USB device. 11. USB Device Plus. When terminal operated as a USB device. 12. Ground C.3 Battery Contacts These contacts represent right to left numbering with the docking port pointing toward you, and the battery contacts facing upward. 1. Battery Plus 2. SMBUS CLK 3. Battery ID.
Appendix C: Port Pinouts 7535 USB Cable – PN 1010057 C.
APPENDIX D USB SETUP APPLICATION D.1 USB Setup The USB Setup application (PN 1000997) is used to update a Windows PC so that it can connect to a Psion Teklogix 7535/7530. System Requirements • • Windows® 2000 or XP ActiveSync 3.5 or later The two driver classes that control USB communication are usbstor (for communication with a device running BooSt) and wceusbsh (for communication through ActiveSync with a device running Windows CE .NET).
Appendix D: USB Setup Application Pre-Installation: Updating usbstor.inf And wceusbsh.inf D.1.2 Pre-Installation: Updating usbstor.inf And wceusbsh.inf 1. Welcome Dialog Box: You can click on the and buttons to navigate between the pre-install windows. At any time during the pre-installation process, you can tap on to exit the program. • • Shut down all other software programs – especially ActiveSync – to avoid a restart request during installation. Tap on the button.
Appendix D: USB Setup Application Pre-Installation: Updating usbstor.inf And wceusbsh.inf • If necessary, tap on the buttons to select different paths for the inf files. 3. Device Driver Install Selection Dialog Box: You can choose to have the device drivers installed immediately by selecting the check box, or you can leave the check box blank and Windows will install the 7535/7530 the next time it is connected. It is recommended that the device be installed immediately.
Appendix D: USB Setup Application Installation: Installing The 7535/7530 As a Device On The PC D.1.3 Installation: Installing The 7535/7530 As a Device On The PC 1. Install Dialog Box: The .sys files you selected are copied to the backup directory. If an unknown error occurs during the backup, you are asked whether you’d prefer to cancel the install or continue with the process. The wceusbsh.inf and usbstor.inf files are updated. 2.
Appendix D: USB Setup Application Post Installation completed the driver installation and the device is no longer marked for reinstall. Only one devnode per device can be ‘unset’ when the device drivers are finally installed. 3. If you indicated that the usbstor driver should be installed, the same steps as described above are carried out for usbstor except that the 7535/7530 must be running BooSt. (Press and hold down the keys for a minimum of 6 seconds to launch the BooSt program.
INDEX Anchor Line 313 # of Cols (ANSI) 274 # of Cols (TESS) 287 # of Pages (ANSI) 273 # of Rows (ANSI) 273 # of Rows (TESS) 288 A Anchor View accents, adding (Custom Characters) 264 accessories bar code readers, connecting 323 hand strap 18 picker cradle 338 pistol grip 19 acknowledged host number (ah) 242 acknowledged remote number (ar) 242 acknowledgements, transmitted (xa) 242 acknowledgements received 242 AcQ (# of messages sent but not acknowledged by cellular master) 243 Active Conn Tab 122 Active
Index multiple sessions 267 Password (Telnet Settings) 271 Password Echo (Telnet Settings) 271 Password Prompt (Telnet Settings) 271 Port 270 sessions, closing 239 sessions, establishing new 239 sessions, listing 239 sessions, moving between 239 settings 268–285 Telnet connection 269 Terminal # 268 Terminal Type (Telnet Settings) 270 transmitting data 155, 157, 278 Xmit Modes 276–279 802.
Index connecting bar code reader 323 decodes required 153 decoding edge-to-edge 153 displaying type of bar code 192 external bar code reader 323 parameters 150–187 prefix character 155, 157 Security 153 stripping characters 155, 157, 158 suffix character 155, 157 symbologies Codabar 159, 172, 180, 184 Code 11 160, 180 Code 128 155, 168, 183 Code 39 153–154, 183 Code 93 159, 173, 181, 184 Discrete 2 of 5 161, 175, 180 EAN 13 156, 169, 179 EAN 8 158, 169, 179 IATA 2 of 5 162 Interleaved 2 of 5 160, 173, 180,
Index Buffer 311 C ca (cellular address) 242 cable diagrams C-1 calibrating (touchscreen) 46, 114 cellular address (ca) 242 Cellular Radio Address 144 Center Bar Code Only (Imager) 182 CH, Bluetooth Controls 119 changing password (Start Menu security) 76 changing softkey labels (Label F1-F4) 275, 288 Channel Enable List 141 Channel List, editing 143 Channel Number 140 Channel Selection 142 Channel Switch Speed 141 Channel Tab (Narrow Band radio) 140 Character parameters (TESS) 289 characters appending to
Index Login Prompt (ANSI Telnet Settings) 271 Password (ANSI Telnet Settings) 271 Password Echo (ANSI Telnet Settings) 271 Password Prompt (ANSI Telnet Settings) 271 connection, host 269, 286 connection list table, Bluetooth Controls 122 Conn Type (connection type) 269, 286 Console Port settings 190 Baud 190 Data Bits 190 Parity 190 Stop Bits 190 console port settings 308 Contact 195 Cont Nxt Fld 296 contrast, adjusting 45 contrast, adjusting display 45 control codes 283 control panel accessing 89 basic se
Index decoded (internal) scanner parameters 162 decoded Intermec (ISCP) parameters 178 decoded scanners 152 Decode Performance 168 Decode Performance Level 168 decode zones (internal scanners) 356 decoding bar codes decodes required 153 Security 153 2-D scanner 356 decrementing parameters 245, 248 Default All Parameters 140 Default Colour 266 Default font 274, 299 DEFAULT key (F3) 223 DEFLT key (F3) 249 DEL (BKSP) Key 42 DEL/CLR key Local Echo mode (ANSI) 281 Delete Char Set ECIs 165 desktop connection, rem
Index Emulation 2392 Telnet 300 AIAG Character 301 Barcode Character 301 Clear Entry Fields 301 Command Region Up, Down, Left & Right 302 Enable Alarm 302 Features 301 Fixed Field Overhd 302 Passthru Printing 301 Send CR with FKEY 300 Serial IO Character 302 3274 Telnet 303 BRK for Attn 304 Features 304 FKEY0-39 305 Fujitsu Host 303 Intl EBCDIC 303 IP for SysReq 303 LU Name 304 LU Name Enabled 304 Null In Fields 303 5250 Telnet 305 Features 307 FKEY0-39 307 Intl EBCDIC 306 LU Name Enabled 306 LU Name Prefix
Index FETM 278 fh (forward host number) 242 field advance 229 field advance key function 229 field backspace 229 field backspace key function 229 field exit key function 229 Field mode 230 Field Order 297 fields Arrow mode 280 auto-tab fields 228 bar-code-only fields 228 completing a data field 229, 298 Enh Edit mode 299 entry fields 228, 291 field advance (tab) 229 field backspace 229 field exit 229 Field Order 297 Field Scroll 288 Field Size 154 fixed fields 228 hidden match 291 home 229 Ign Bcode_fld 299
Index home key function 229 host multiple hosts 235 selecting a host 235 switching between hosts 292 Host (ANSI Telnet Settings) 270 Host (TESS Connection Type) 287 Host Char Set 284 Host Connection ANSI 269 TESS 286 Host echo mode 280 host select (CTRL h) 234 host terminal number of session (tn) 242 I I/O fields 228 IATA 2 of 5 162 IBM 5250 Emulation Keys 229 ICD/DCH controls, displaying 283 Idle Poll Limit 147 IEEE radio, configuring 22 Ign Bcode_fld 299 imager E1022 1D imager specs 363 SX5303 2D imager
Index ITF Check (I 2 of 5 symbology) 160 I 2 of 5 Short Code 153 K Kbd lock 278 Kbd Locked 293 Kbd Modes 280–282 keyboard compatibility with VT220 ANSI keyboard 237 DEC Cursor Keys 282 disabling the keyboard 282 function keys 237 Kbd modes 280–282 key repeat 98, 99 lock 278, 293 lock messages 234 one shot mode 100 36-key keyboard 43 58-key 42 Keyboard (Tekterm) 255 keyboard backlight 45 keyboard keys 40 ALT 42 arrow keys 41 BKSP 42 CTRL 42 DEFAULT key (F3) 223 DEL 42 ESC 42 function keys, accessing 221,
Index Local echo mode 280 menu 235 procedures 235 process 235, 293 Save on Reset 293 Location 195 “LOCK–B” message 234, 288 locked keyboard 278, 293 locked 7535 292 “LOCK–H” message 234, 288 lock time, decreasing with queuing mode 236 Login (ANSI Telnet Settings) 271 Login Failed (ANSI Telnet Settings) 271 Login Prompt (ANSI Telnet Settings) 271 Lower (ANSI Host Char Set) 284 Low Level screen (Narrow Nand radio) 139 Low Power Timeout 163 LU Name 304 LU Name Enabled 304, 306 LU Name Prefix 306 L1, Set Length
Index N Name 197 name servers, assigning 29 Narrow Band radio 137 Channel tab 140 Info tab 137 Low Level screen 139 Power tab 146 Protocol tab 144 Radio tab 147 statistics screen 137 narrow band radio signal quality 52 Narrow Band radio (RA1001) specs 351 network Ad Hoc 25 connection, monitoring 62 control panel settings 317 infrastructure 25 Network addresses 317 network authentication (Shared Mode) 26 Network Key, assigning 26 Newline 282 “NEXT–B” message 235, 236 “NEXT–H” message 235, 236 NEXT key (F1)
Index unpowered 338 picker cradle See also Picker Cradle 338 PIN, Bluetooth Controls 118 pinouts C-1 PINs, Bluetooth devices 119 pins – enabling for printing 292 pistol grip, installing on 7535 19 pitch, scanning 362 pivot (viewport) 312 pocket PC compatibility 89 Polling 145 polling values, testing 146 Poll Timeout (Polling) 145 Port scan-see parameters 312 Port (ANSI Telnet Settings) 270 Port (TESS Connection Type) 287 Port (802.
Index enabling/disabling next message 293 mode 236, 292 pages 236 Queuing parameter 235, 292 response time, improving 236 R ra (received acknowledgements) 242 radio adding new network connection 24 advanced settings of 30 Auto Radio Addr (narrow band radio) 318 Bluetooth 116–129 Bluetooth specs 351 Configure button 24 configuring 22 adding a new network connection 24 Ad Hoc 25 authentication, network 26 Configure button 24 Connect button 24 EAP (Extensible Authentication Protocol) 27 Infrastructure 25 Key
Index response time, improving with queuing mode 236 retransmissions (802.
Index Low Power Timeout 163 Max Gain (Imager) 183 Max Illumination (Imager) 183 Max Integration (Imager) 183 NOTIS Editing 173 one dimensional (1D) internal scanner 56 parameters (for TESS Settings) 296 Parameter Scanning 163 PDF internal scanner dimensional (1D) 57 Postal PlaNET 185 PostNET 185 Royal 185 PowerScan LR and XLR specs 366 PowerScan standard range specs 368 Prefix 165 RFID internal scanner (combo) 58 safety warnings 53 Scan Data Format 165 Scan Log File 192 Scan Result Time 192 Security Level 1
Index Conv. UPC-E To UPC-A 170 Conv. UPC-E1 To UPC-A 171 Convert To Code 32 166 Convert To EAN 13 174 country code 156 decoded 152 decoded (external) 188 Console Port 190 Tether Port 188 decoded (internal) 162 decoded Intermec (ISCP) 178 Decode Perf.
Index 2D RSS Code 177, 187 2D Scanning Mode 164 2D UPC Half Block Stitching 172 Scan Result 192 Scan Result Time 192 Scan-See keyboard mapping 316 parameters, setting 312–317 port settings 308 serial number 316 viewport, mapping 312 screen stylus, using to navigate 67 touch pen, using 67 Windows CE, navigating 67 Screen parameters ANSI 273 TESS 287 screens # of Cols (ANSI) 274 # of Cols (TESS) 287 # of Rows (ANSI) 273 # of Rows (TESS) 288 Anchor View 285, 300 Display Shift 260 Field Scroll 288 moving betwee
Index SE 923 HS 357 Shared 311 Shared Mode (network authentication) 26 SHIFT Key 41 Short Code 153 Shutdown Bootloader 82 Cold Reset 82 Suspend 82 Warm Reset 82 Shutdown (Start Menu) 81 SI CRC 295 SI Fkey 295 signal quality, narrow band 52 signal quality, 802.11 51 SI mode 294 Simple Network Management (SNMP) See SNMP 194 SIP (Soft Input Panel 93 SI prefix/suffix 295 size of fields 154 Size/Chars (bar code scanning) 154 skew, scanning 362 Sled See picker cradle.
Index stylus (touch pen), using 67 Stylus Properties 113 Double-tap (stylus sensitivity) 113 sub-menus, accessing 244, 247 Suffix 165 suffix serial I/O 295 suffix (serial I/O) 295 Suffix Char 155, 157 Supervisor security level 74 Supp.
Index Replace mode 230 resetting a TESS session 234 Reverse (video attrib.) 298 running multiple sessions 228 selecting a session 228 settings 285–300 status message 233 switching between hosts 292 Terminal # 286 Tests 291 Valid Numerics 299 video attributes 298 802.
Index Font Change 259 Screen Switch 258 User security level 74 V Valid Numerics (TESS) 299 Variations (Code 128) 156 Verify 153 Version 316 Version (Scan-See) 316 version number – TESS 233 vertical tab (CTRL K) 281 video attributes 274–275, 298 All Fld Video 298 Blink 275, 298 Bold 274, 298 Reverse 275, 298 Underline 275 View IDs 261 viewport, mapping 312 visible fields match 290 V Match Chr 290 volume, adjusting 257 VT220 Function keys – equivalent Psion Teklogix keyboard Function keys 237 W warm reset
Index approvals 351 specifications 349 7535 approvals 348 off-line 235 specifications 347 80-col. font 274 802.IQ connection (ANSI) 269 802.IQ connection (TESS) 286 802.IQ v1(protocol) Auto Radio Addr 253 802.IQ v2 318 802.1X authentication, enabling 27 802.11b Direct Sequence 351 802.