User manual

Chapter 5: Configuration
Data Connection Configuration
210
Psion Teklogix 7535/7530 Hand-Held Computer User Manual
Default profile uses parameters from a built-in database. The home network (the
network that issued the SIM) is used for the database look-up. While there can be
many configured profiles, only one profile can be active at any time.
If connection profiles are configured manually, the Enable automatic
configuration: checkbox should normally be unchecked.
In one particular use case, manually configured profiles may be combined with
automatic configuration. If multiple SIM cards are used with the same device, each
SIM card being from a different operator and some or all of them requiring a
manually set up profile, automatic configuration may be used to automatically pick
the correct manually configured profile for each SIM card. For this to work, each
profile must be configured while the corresponding SIM card is inserted in the
device and initialized (i.e. the status is at least SIM is ready).
The Select profile: drop-down list in the data configuration profile selects to which
profile a subsequent action applies. A profile named Default is always present and
contains the current parameters from the database. The following actions
are available:
Show
The parameters for the selected profile are displayed when you tap the stylus on this
button. For the Default profile, the publicly known password is shown – otherwise,
the password is hidden.
Edit
The parameters of the selected profile can be edited when you choose the Edit
button. Keep in mind that you cannot edit the Default profile.
Delete
The selected profile is deleted. You cannot delete the Default profile.