WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual December 11, 2006 ISO 9001 Certified Quality Management System Part No. 8100107.
© Copyright 2006 by Psion Teklogix Inc., Mississauga, Ontario This document and the information it contains is the property of Psion Teklogix Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or in any manner detrimental to the interests of Psion Teklogix Inc.
Return-To-Factory Warranty Psion Teklogix provides a return to factory warranty on this product for a period of twelve (12) months in accordance with the Statement of Limited Warranty and Limitation of Liability provided at www.psionteklogix.com/warranty. (If you are not already a member of Teknet and you attempt to view this warranty, you will be asked to register. As a member of Teknet, you’ll have access to helpful information about your Psion Teklogix products at no charge to you.
mium, mercury, hexavalent chromium, and flame retardants PBB and PBDE that may be contained in a product. Only products meeting these high environmental standards may be “placed on the market” in EU member states after July 1, 2006. RoHS Logo Although there is no legal requirement to mark RoHS-compliant products, Psion Teklogix Inc.
TABLE Program License Agreements . . Approvals And Safety Summary . OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . .I . . . . . . . . . . . . . . . . . . . . . . . . .XI Chapter 1: Introduction 1.1 1.2 1.3 About This Manual . . . . . . . . . . . . . . . . . . . . . Text Conventions . . . . . . . . . . . . . . . . . . . . . . About The WORKABOUT PRO Hand-Held Computer . . 1.3.1 Features . . . . . . . . . . . . . . . . . . . . . . . 1.3.2 The WORKABOUT PRO C Hand-Held Computer 1.3.
Contents Chapter 3: Getting To Know The WORKABOUT PRO 3.1 3.2 3.3 Features Of The WORKABOUT PRO C . . . . . . . . . . . Features of the WORKABOUT PRO S . . . . . . . . . . . . The Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3.1 Battery Safety . . . . . . . . . . . . . . . . . . . . . 3.3.2 Removing And Installing The Battery Pack . . . . . . 3.3.3 Battery Swap Time . . . . . . . . . . . . . . . . . . . 3.3.4 Charging The Battery . . . . . . . . . . . . . . . . . 3.
Contents 4.2 Windows Mobile 5.0 Desktop–Today Screen. . . 4.2.1 Windows Mobile 5.0 Navigation Bar . . . 4.2.2 Today’s Date, Clock And Alarm . . . . . 4.2.3 Ownership Information . . . . . . . . . . 4.2.4 E-mail Notification . . . . . . . . . . . . 4.2.5 Task Notification . . . . . . . . . . . . . 4.2.6 Calendar Of Upcoming Appointments . . 4.3 Start Menu. . . . . . . . . . . . . . . . . . . . . 4.3.1 Customising The Start Menu . . . . . . . 4.4 Managing Files And Folders . . . . . . . . . . . 4.4.
Contents 5.5 5.4.5 Diags Tab. . . . . . . . . . . . . Setting Up A RA2040 CF Radio . . . . 5.5.1 Adding A New Network Setup. . 5.5.2 Network Authentication Settings. 5.5.3 Deleting A Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 86 88 89 92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 6.14 Certificates . . . . . . . . . . . . . 6.14.1 Choosing A Certificate . . . 6.15 Clock & Alarms . . . . . . . . . . . 6.16 COM Port Manager . . . . . . . . . 6.17 Error Reporting . . . . . . . . . . . 6.18 GPS – Global Positioning System . 6.19 Manage Triggers . . . . . . . . . . 6.19.1 Trigger Mappings . . . . . . 6.20 Memory . . . . . . . . . . . . . . . 6.20.1 Main Tab. . . . . . . . . . . 6.20.2 Storage Card . . . . . . . . . 6.20.3 Running Programs . . . . . . 6.21 Power Icon . . . . . . .
Contents 6.29 Bluetooth Setup . . . . . . . . . . . . . . . . . . . . . 6.29.1 Bluetooth Mode . . . . . . . . . . . . . . . . . 6.29.2 Scanning For A New Device . . . . . . . . . . . 6.29.3 Bluetooth COM Ports . . . . . . . . . . . . . . 6.29.4 Active Connections List . . . . . . . . . . . . . 6.29.5 About Tab . . . . . . . . . . . . . . . . . . . . 6.29.6 The Bluetooth GPRS Phone . . . . . . . . . . . 6.30 Connections – Connecting To The Internet . . . . . . . 6.30.1 Modem Connection Setup . . . . . . . .
Contents 7.5 7.6 7.7 7.8 7.9 7.10 7.11 7.12 7.13 7.14 7.15 Demo Scanner . . . . . . . . . . . . . . . . . . . . . Download Agent . . . . . . . . . . . . . . . . . . . Excel Mobile . . . . . . . . . . . . . . . . . . . . . 7.7.1 Workbook Components . . . . . . . . . . . . 7.7.2 Adding, Deleting And Renaming Worksheets 7.7.3 Entering Data In A Worksheet . . . . . . . . 7.7.4 Working With Cells, Rows and Columns . . . 7.7.5 Creating Formulas . . . . . . . . . . . . . . . File Explorer. . . . . . . . . .
Contents 7.15.3 Changing Synchronization Settings . . . . 7.15.4 Creating a New Account . . . . . . . . . . 7.16 Tasks . . . . . . . . . . . . . . . . . . . . . . . . 7.17 Terminal Services Client . . . . . . . . . . . . . . 7.17.1 Connecting To A Terminal Server . . . . . 7.17.2 Moving Around Terminal Services Client . 7.17.3 Improving Display Performance . . . . . . 7.17.4 Improving Browser Performance . . . . . 7.17.5 Disconnecting Without Ending A Session . 7.17.6 Ending A Session. . . . . . . . . . . .
Contents 9.4.3 Battery Charge Duration. . . . . . . . . . . . . . . . . . . 9.4.4 Charger LED Indicators . . . . . . . . . . . . . . . . . . . 9.4.5 Troubleshooting The Charging Operation Of The Dock . . 9.4.6 Desktop Docking Station Ports . . . . . . . . . . . . . . . 9.4.7 Linking A WORKABOUT PRO To A PC . . . . . . . . . 9.4.8 Linking A WORKABOUT PRO To An Ethernet Network. 9.4.9 Troubleshooting The Docking Station Operations . . . . . 9.5 Single Battery Charger–Model #WA3001-G1 . . . . . . . . . . . 9.
Contents Chapter 10: Specifications 10.1 Hand-Held Computer Specifications . . . . . . . . . . . . . 10.2 Radio Specifications . . . . . . . . . . . . . . . . . . . . . . 10.3 Scanner Specifications . . . . . . . . . . . . . . . . . . . . . 10.3.1 SE 1223HP, LR, ALR And SE 955HP Specifications. 10.3.2 EV15 Imager Specifications . . . . . . . . . . . . . . 10.3.3 HHP5180 Imager. . . . . . . . . . . . . . . . . . . . 10.3.4 SX5393 Imager. . . . . . . . . . . . . . . . . . . . . 10.
PROGRAM LICENSE AGREEMENTS Windows Mobile Version 5.0 EULA Terms • • • You have acquired a device (“DEVICE”) that includes software licensed by Psion Teklogix Inc. from an affiliate of Microsoft Corporation (“MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.
License Agreement Upgrade Software. Psion Teklogix Inc.
License Agreement • • • • • ENTERPRISE, AND (ii) FOR PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICESED BY MPEG LA, L.L.C. • If you have questions regarding this Notice, please contact MPEG LA, L.L.C., 250 Steele Street, Suite 300, Denver, Colorado 80206; Telephone 303 331.1880; FAX 303 331.1879 No Rental/Commercial Hosting. You may not rent, lease or lend or provide commercial hosting services with the SOFTWARE to others. SOFTWARE as Component of the Device – Software Transfer.
License Agreement provide customized services or technologies to you. MS, Microsoft Corporation, their affiliates and/or their designated agent may disclose this information to others, but not in a form that personally identifies you. • Internet Gaming/Update Features. If the DEVICE Software provides, and you choose to utilize, the Internet gaming or update features within the DEVICE Software, it is necessary to use certain computer system, hardware, and software information to implement the features.
License Agreement DEVICE Software onto the DEVICE as a replacement copy for the existing DEVICE Software, and use it in accordance with this EULA, including any additional EULA terms accompanying the upgrade DEVICE Software. • COMPANION CD. If any software component(s) is provided by Psion Teklogix Inc.
License Agreement OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLE FOR ANY AMOUNT IN EXCESS OF TWO HUNDRED AND FIFTY U.S. DOLLARS (U.S. $250).
License Agreement • • • • • YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS. Note on Java Support. The SOFTWARE may contain support for programs written in Java.
License Agreement The Software is the property of Psion Teklogix Inc. or its licensors and is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The Software is licensed, not sold. Psion Teklogix Inc. provides the Software and licenses its use worldwide. You assume responsibility for the selection of the Software to achieve your intended results, and for the use and results obtained from it. 1.
License Agreement support machines, or weapons systems, in which the failure of the Software could lead to death, personal injury, or severe physical or environmental damage (“High Risk Activities”). We specifically disclaim any express or implied warranty of fitness for High Risk Activities. 4. DISCLAIMER OF WARRANTY We do not warrant uninterrupted or error free operation of the Software nor do we warrant that the Software will meet your requirements.
License Agreement 8. ENDING THIS AGREEMENT We may terminate this Agreement and your license immediately without notice if (a) you fail to comply with any term of this Agreement, or (b) your rights are assigned by you, by operation of law or otherwise. In such event, you must return or destroy all copies and component parts of the Software and documentation, as well as any other Psion Teklogix proprietary information in your possession, within fourteen (14) days of the date of termination.
APPROVALS AND SAFETY SUMMARY FCC DECLARATION OF CONFORMITY (DoC) Applicant’s Name & Address: PSION TEKLOGIX Inc. 2100 Meadowvale Blvd., Mississauga, Ontario Canada L5N 7J9 Contact Person: Iain Roy Telephone No.: (905) 813-9900 US Representative’s Name & Address: PSION TEKLOGIX 1810 Airport Exchange Blvd., Suite 500 Erlanger, KY, 41018, USA Contact Person: Kyle Day Telephone No.: (859) 372-4329 Equipment Type/Environment: Computing Devices Trade Name / Model No.
Approvals And Safety Summary CE Marking When used in a residential, commercial or light industrial environment the product and its approved UK and European peripherals fulfil all requirements for CE marking. R&TTE Directive 1999/5/EC This equipment complies with the essential requirements of EU Directive 1999/5/EC (Declaration available: www.psionteklogix.com). Cet équipement est conforme aux principales caractéristiques définies dans la Directive européenne RTTE 1999/5/CE.
Approvals And Safety Summary Tämä laite vastaa EU:n radio- ja telepäätelaitedirektiivin (EU R&TTE Directive 1999/5/EC) vaatimuksia. (Julkilausuma nähtävillä osoitteessa: www.psionteklogix.com). PSION TEKLOGIX tímto prohlašuje, že WORKABOUT PRO C & S je ve shodě se základními požadavky a dalšími příslušnými ustanovenímisměrnice 1995/5/ES (NV č. 426/2000 Sb.) a Prohlášení o shodě je k dispozici na www.PsionTeklogix.com. Toto zařízení lze provozovat v České republice na základě generální licence č.
Approvals And Safety Summary • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Approvals And Safety Summary Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. En cas d’utilisation du module radio 802.11, afin d'éviter toute interférence radio avec le service autorisé, l'appareil doit être utilisé à l'intérieur, tout en tant éloigné de toute fenêtre afin de garantir le maximum de protection. Si cet équipement (ou son antenne émettrice) est installé à l'extérieur, il est alors soumis à licence.
Approvals And Safety Summary DO NOT REMOVE COVERS OR OPEN ENCLOSURES To avoid injury, the equipment covers and enclosures should only be removed by qualified service personnel. Do not operate the equipment without the covers and enclosures properly installed. For qualified personnel: Remove the battery pack before removing the cover and enclosures. CAUTION! Danger of explosion if a WORKABOUT PRO M-E, C & S battery is incorrectly handled, charged, disposed of or replaced.
Approvals And Safety Summary CAUTION! To reduce risk of damage to the electric plug and cord when unplugging the charger, pull the plug rather than the cord. CAUTION! Make sure the cord is positioned so that it is not stepped on, tripped over, or otherwise subjected to damage or stress. CAUTION! Do not operate with a damaged cord or plug. Replace immediately.
Approvals And Safety Summary LITHIUM ION BATTERY SAFETY PRECAUTIONS Important: It is critical that this safety information be reviewed and that all warnings be strictly followed. Warning: BATTERIES ARE CONSIDERED HAZARDOUS WASTE and must be returned to Psion Teklogix for proper disposal. All used batteries must be forwarded to one of the following offices: Psion Teklogix Inc. Psion Teklogix Corp. 2100 Meadowvale Blvd. 1810 Airport Exchange Blvd.
Approvals And Safety Summary • • • • • • • • Do not use the battery in combination with primary batteries (such as dry-cell batteries) or batteries of different capacities or brands. Immediately remove the battery from the device or battery charger and stop use if the battery gives off an odor, generates heat, becomes discoloured or deformed, or in any way appears abnormal during use. Do not continue charging the battery if it does not recharge within the specified charge time.
1 INTRODUCTION 1.1 About This Manual . . . . . . . . . . . . . . . . . . . . 1.2 Text Conventions . . . . . . . . . . . . . . . . . . . . . 1.3 About The WORKABOUT PRO Hand-Held Computer . 1.3.1 Features . . . . . . . . . . . . . . . . . . . . . . . 1.3.2 The WORKABOUT PRO C Hand-Held Computer 1.3.3 The WORKABOUT PRO S Hand-Held Computer 1.3.4 Regulatory Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1: Introduction About This Manual 1.1 About This Manual This manual describes how to configure, operate and maintain the WORKABOUT PRO hand-held computer. Chapter 1: Introduction provides a basic overview of the WORKABOUT PRO hand-held. Chapter 2: Basic Checkout describes the steps required to get the unit ready for operation. Chapter 3: Getting To Know The WORKABOUT PRO describes the features and outlines how to charge and maintain the battery.
Chapter 1: Introduction Text Conventions 1.2 Text Conventions Note: Notes highlight additional helpful information. Important: These statements provide particularly important instructions or additional information that is critical to the operation of the equipment. Warning: These statements provide critical information that may prevent physical injury, equipment damage or data loss. 1.
Chapter 1: Introduction Features Processor: • 400 MHz Intel Xscale PXA255 Operating System: • Microsoft Windows Mobile 5.0 Programming Environment: • • • • • HTML, XML Psion Teklogix Mobile Devices SDK Windows Mobile 5.0 Standard SDK .NET Compact Framework WORKABOUT PRO Hardware Development Kit Wireless Communications: Optional expansion modules for: • 802.
Chapter 1: Introduction Features • • Signature capture Keyboards - Alphanumeric (C models) - Numeric (S model) - Ergonomic ambidextrous one-hand operation - Backlit, high durability hard-capped keys Indicators and Controls - Internal speaker with volume control - LED indicating battery charge status Bar Code Applications (all are optional): • • • • • • • • SX5393 imager expansion module (Model No. WA9010) EV15 imager expansion module (Model No.
Chapter 1: Introduction Features Power Management: • • • • • • • • Full-shift Standard Lithium-ion (3.7V, 2000 mAh) High-Capacity Lithium-ion (3.
Chapter 1: Introduction The WORKABOUT PRO C Hand-Held Computer 1.3.2 The WORKABOUT PRO C Hand-Held Computer Figure 1.1 WORKABOUT PRO C Audio Jack Tether Port Low Insertion Force Port (LIF) Figure 1.2 Tether Port, Low Insertion Force (LIF) Port And Audio Jack 8 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 1: Introduction The WORKABOUT PRO S Hand-Held Computer 1.3.3 The WORKABOUT PRO S Hand-Held Computer Figure 1.3 WORKABOUT PRO S Audio Jack Tether Port Low Insertion Force Port (LIF) Figure 1.4 Tether Port, Low Insertion Force (LIF) Port And Audio Jack WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 1: Introduction Regulatory Labels 1.3.4 Regulatory Labels Warning: Using controls or adjustments or performing procedures other than those specified herein may result in hazardous radiation exposure. Aperture This labelled is affixed below the aperture. Figure 1.5 Scanner Module–Laser Warning Label Figure 1.6 End-Cap–Expansion Module Warning 0889 N15025 For Batteries See User Instructions 1050281A 7525C-G1 WORKABOUT PRO RATING: 5 VDC 2.
Chapter 1: Introduction Regulatory Labels 7525S-G1 WORKABOUT PRO RATING: 5 Vdc 3A MAX CONTAINS: FCC ID: GM37525BTB IC: 2739D-7525BTB 0889 For Batteries See User Instructions FOR HOME OR OFFICE USE 1050287A N15025 Figure 1.8 FCC Compliance Label – WORKABOUT PRO S WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
2 BASIC CHECKOUT 2.1 Preparing The WORKABOUT PRO For Operation . . . 2.1.1 The Main Battery . . . . . . . . . . . . . . . . . . 2.1.1.1 Charging The Main Battery . . . . . . . . 2.1.2 The Backup Battery. . . . . . . . . . . . . . . . . 2.2 Turning The WORKABOUT PRO On and Off. . . . . . 2.2.1 Installing The Battery And Switching The Unit On 2.2.2 Switching The Unit Off (Suspend) . . . . . . . . . 2.3 The Getting Started CD . . . . . . . . . . . . . . . . . . 2.4 Connecting The WORKABOUT PRO To A PC . . . .
Chapter 2: Basic Checkout Preparing The WORKABOUT PRO For Operation 2.1 Preparing The WORKABOUT PRO For Operation 2.1.1 The Main Battery Warning: It is critical that you review the battery safety guidelines in “Lithium Ion Battery Safety Precautions” on page XVIII before charging the battery. The WORKABOUT PRO C can be powered with one of the following batteries: • Standard Battery • High-Capacity Battery, or • 3 AA alkaline batteries.
Chapter 2: Basic Checkout The Backup Battery 2.1.2 The Backup Battery To preserve data stored in your WORKABOUT PRO while you swap the main battery, the unit is equipped with an internal backup battery–a standard Lithium Alloy Manganese Dioxide coin battery–a Maxell ML2032. The backup battery will supply 5 minutes of continuous power while you install a charged, main battery. The backup battery is trickle charged from the main battery.
Chapter 2: Basic Checkout Switching The Unit Off (Suspend) Note: If you are using a docking station or an external power supply, you can insert an uncharged battery, dock the unit and switch it on. To switch on the WORKABOUT PRO: • Press and hold down the [ENTER/ON] key for at least one second. • When the LED flashes green, release the [ENTER/ON] button. The desktop Today screen is displayed.
Chapter 2: Basic Checkout The Getting Started CD Once installation is complete, a new screen is displayed that allows you to personalize your WORKABOUT PRO. • If you do not want to explore further options at this time, tap on Finish. Note: You can always insert the CD another time to add additional programs. Tapping on one of the following options displays the associated information: Add new programs to my device–walks you through installing additional programs.
Chapter 2: Basic Checkout Connecting The WORKABOUT PRO To A PC If you insert your CD a second time, you’ll see the Welcome Back screen. • Tap on an option in this screen (e.g., Add new programs to my device) and follow the associated steps. 2.4 Connecting The WORKABOUT PRO To A PC Note: Refer to “Linking A WORKABOUT PRO To A PC” on page 310 for more details about the desktop docking station and how to link to a PC. The WORKABOUT PRO can be connected to a PC using the desktop docking station.
Chapter 2: Basic Checkout Aligning (Calibrating) The Touchscreen 2.5 Aligning (Calibrating) The Touchscreen Refer to “Aligning (Calibrating) The Touchscreen” on page 37 for details. 2.6 Resetting The WORKABOUT PRO Hand-Held When you reset your hand-held, the registry settings and any installed programs (stored on the flash file system) and data are preserved. 2.6.1 Performing A Reset • Note: Press and hold down the [BLUE] key and the [ENTER/ON] key simultaneously for a minimum of six seconds.
GETTING TO KNOW THE WORKABOUT PRO 3 3.1 Features Of The WORKABOUT PRO C . . . . . . . . . . . . . . . . . . 3.2 Features of the WORKABOUT PRO S. . . . . . . . . . . . . . . . . . . 3.3 The Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3.1 Battery Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3.2 Removing And Installing The Battery Pack . . . . . . . . . . . . . 3.3.3 Battery Swap Time . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3.3.
Chapter 3: Getting To Know The WORKABOUT PRO 3.10 Bluetooth Radio . . . . . . . . . . . . . . 3.11 The SD/MMC Card—Adding Memory . . 3.11.1 Inserting The Card . . . . . . . . . . 3.12 General Maintenance. . . . . . . . . . . . 3.12.1 Caring For The Touchscreen. . . . . 3.12.2 Cleaning The WORKABOUT PRO . 22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual . . . . . . . . . . . .
Chapter 3: Getting To Know The WORKABOUT PRO Features Of The WORKABOUT PRO C 3.1 Features Of The WORKABOUT PRO C Sound Port Stylus (pointing tool) LED (Light Emitting Diode) Microphone Figure 3.1 Front Of WORKABOUT PRO C WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 3: Getting To Know The WORKABOUT PRO Features Of The WORKABOUT PRO C End Cap Back Cover – optional scanner module fits here Battery Cover Battery Cover Fasteners Tether Port Low Insertion Force (LIF) Port Audio Jack Figure 3.2 Back Of WORKABOUT PRO 24 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 3: Getting To Know The WORKABOUT PRO Features of the WORKABOUT PRO S 3.2 Features of the WORKABOUT PRO S Sound Port Stylus (pointing tool) LED (Light Emitting Diode) Microphone Figure 3.3 Front Of WORKABOUT PRO S 3.3 The Batteries The WORKABOUT PRO C hand-held can operate with a Standard Lithium Ion battery pack, a High Capacity Lithium Ion battery pack or three AA alkaline batteries.
Chapter 3: Getting To Know The WORKABOUT PRO Battery Safety 3.3.1 Battery Safety Important: Before attempting to install, use or charge the battery pack, it is critical that you review and follow the important safety guidelines in the section entitled “Lithium Ion Battery Safety Precautions” beginning on page XVIII. 3.3.2 Removing And Installing The Battery Pack Removing The Battery Cover • • • Turn off the WORKABOUT PRO before opening the battery cover.
Chapter 3: Getting To Know The WORKABOUT PRO Battery Swap Time 3.3.3 Battery Swap Time Assuming the default power saving parameters and battery reserve level have not been altered, battery swap time is approximately 5 minutes—you will not lose data if the battery is replaced within this time frame. To protect data, the safest place to store data is on a SD/MMC memory card or externally to the device on a USB memory stick or on a PC.
Chapter 3: Getting To Know The WORKABOUT PRO Chargers And Docking Stations Important: 3.3.4.1 The backup battery is trickle charged from the main battery. To maximize battery life, avoid excessive discharging and recharging of the backup battery by keeping the main battery fully charged. IF YOU ARE POWERING UP A NEW UNIT, a warning message may appear on the screen indicating that the backup battery capacity is low.
Chapter 3: Getting To Know The WORKABOUT PRO Switching The Hand-Held On And Off 3.4 Switching The Hand-Held On And Off Switching On The WORKABOUT PRO • Press and hold down the [ENTER/ON] key for at least one second. • When the LED flashes green, release the [ENTER/ON] button. The startup Today screen is displayed. Note: If the WORKABOUT PRO is in suspend state, pressing [ENTER/ON] key ‘wakes’ the unit from this state.
Chapter 3: Getting To Know The WORKABOUT PRO The Keyboards 3.5 The Keyboards 3.5.1 The WORKABOUT PRO C Keyboard Arrow Keys Scan Key Scan Key Contrast Key Display Backlight Key Orange Key Blue Key Figure 3.5 The Keys WORKABOUT PRO C units are designed with a 55-key alphanumeric keyboard. Along with the standard keyboard keys, these units are equipped with an [ORANGE] and a [BLUE] modifier key to provide access to additional keys and system functions.
Chapter 3: Getting To Know The WORKABOUT PRO The WORKABOUT PRO S Keyboard 3.5.2 The WORKABOUT PRO S Keyboard Scan Key Scan Key Arrow Keys Scan Keys Scan Key FN/Blue Key Display Backlight Key ALPHA/Orange Key 3.5.3 Modifier Keys The [SHIFT], [CTRL], [ALT], [ORANGE] and [BLUE] keys are modifier keys. Pressing a modifier key changes the function of the next key pressed. For example, on a WORKABOUT PRO C, a square bracket is printed in orange print above the [4] key.
Chapter 3: Getting To Know The WORKABOUT PRO Activating Modifier Keys & The Shift-State Indicator Icon 3.5.3.1 Activating Modifier Keys & The Shift-State Indicator Icon When a modifier key is pressed, it is represented in the shift-state indicator icon in the softkey bar at the bottom of the screen, making it easier to determine whether or not a modifier key is active.
Chapter 3: Getting To Know The WORKABOUT PRO The Keys To help you identify when a modifier key is locked ‘on’, the key is represented in the shift-state indicator icon with a black frame around it. Figure 3.7 Shift-State Indicator Icon – Locked Modifier Key Once a modifier key is unlocked or turned off, it is no longer displayed in the shift-state indicator icon. 3.5.
Chapter 3: Getting To Know The WORKABOUT PRO The Keys The [BKSP/DEL] Key The [BKSP] key (sometimes referred to as destructive backspace) moves the cursor one character to the left, erasing the incorrectly entered key stroke. The [DEL] key ([BLUE] [BKSP]) erases the character at the cursor position. The [CTRL] And [ALT] Keys The [CTRL] and [ALT] keys modify the function of the next key pressed and are application dependent.
Chapter 3: Getting To Know The WORKABOUT PRO The WORKABOUT PRO S – Accessing Alpha Keys The Macro Keys–[M1] to [M3] (WORKABOUT PRO C Only) Macro keys [M1] to [M3] contain up to 20 programmable characters (“positions”) and executable keys. These keys are accessed by pressing [ORANGE] followed by alpha keys [O], [P] or [Q]. When pressed, the macro key executes a custom-defined string of characters, including executable keys. 3.5.
Chapter 3: Getting To Know The WORKABOUT PRO Creating Uppercase Letters to press the [2] key three times. With the [ALPHA/ORANGE] key locked ‘on’, if you press [2] twice and then pause between key presses for 1 second, the letter ‘b’ will be selected automatically. 3.5.5.2 Creating Uppercase Letters To display capital letters, you need to first activate the [CAPS] key. You’ll find this key in orange print above the [.] (period) key. • Press [ALPHA/ORANGE] followed by the [.
Chapter 3: Getting To Know The WORKABOUT PRO Aligning (Calibrating) The Touchscreen To set the backlight intensity and the duration of time that the backlight will remain on, you’ll need to choose the Backlight icon. Tap on Start>Settings and then, tap on the System tab. Refer to “Backlight” on page 122 for details about the Backlight. 3.6.
Chapter 3: Getting To Know The WORKABOUT PRO Indicators Note: This window provides two additional tabs: ClearType and Text Size. Tapping on the ClearType tab allows you to enable the ClearType option to smooth screen font appearance. The Text Size tab allows you to increase or decrease the size of the font displayed on the screen. 3.
Chapter 3: Getting To Know The WORKABOUT PRO Adjusting Speaker Volume On The WORKABOUT PRO C The volume keys are located above [A] and [B] on WORKABOUT PRO C models and to the left and right of the arrow key on WORKABOUT PRO S models. The increase volume key is labelled with a plus symbol and the decrease volume key is labelled with a minus symbol . 3.7.2.1 • • 3.7.2.
Chapter 3: Getting To Know The WORKABOUT PRO Storing Batteries • • • The hand-held is ‘event’ driven—that is, when the unit is not in use, it reverts to sleep mode (even when it appears to be running), saving battery power. Events include a key press, touchscreen taps and scan triggers. Power consumption is reduced if you avoid unnecessary events, and allow the unit to sleep as much as possible. The battery is a ‘smart battery’ with built-in intelligence.
Chapter 3: Getting To Know The WORKABOUT PRO Bluetooth Radio The desktop docking station can complete batch uploads to a Client USB connected PC or server. An optional 10/100baseT Ethernet module is also available. Unlike the desktop docking station, the quad docking station supports only TCP/IP connections to a PC or server through a 10/100baseT Ethernet connection. When a WORKABOUT PRO is properly inserted in a docking station, a dock icon is displayed in the navigation bar at the top of the screen.
Chapter 3: Getting To Know The WORKABOUT PRO General Maintenance A hinged door at the top of the battery compartment protects the connectors. Hinged SD door SD/MMC Card Figure 3.8 Inserting the SD/MMC Card • • Lift the hinged SD door by gently pulling upward on the metal tab. Orient the SD/MMC card according to the legend stamped into the battery well plastic. • Place the card in the slot with the card contacts down, and slide it inward until it latches into place.
Chapter 3: Getting To Know The WORKABOUT PRO Cleaning The WORKABOUT PRO • sodium hydroxide, • concentrated caustic solutions, • benzyl alcohol, and • concentrated acids. If the touchscreen is used in harsh environments, consider applying a disposable screen protector (WA6110). These covers reduce the clarity of the display slightly but will dramatically extend the useful life of the touchscreen. When they become scratched and abraded, they are easily removed and replaced. 3.12.
4 WORKING WITH WINDOWS MOBILE 5.0 4.1 Navigating In Windows Mobile 5.0 And Applications . 4.1.1 Navigating Using A Touchscreen And Stylus . . 4.2 Windows Mobile 5.0 Desktop–Today Screen. . . . . . 4.2.1 Windows Mobile 5.0 Navigation Bar. . . . . . . 4.2.2 Today’s Date, Clock And Alarm . . . . . . . . . 4.2.3 Ownership Information . . . . . . . . . . . . . . 4.2.4 E-mail Notification . . . . . . . . . . . . . . . . 4.2.5 Task Notification . . . . . . . . . . . . . . . . . 4.2.
Chapter 4: Working With Windows Mobile 5.0 Navigating In Windows Mobile 5.0 And Applications 4.1 Navigating In Windows Mobile 5.0 And Applications Graphic user interfaces like Windows Mobile 5.0 for portable devices or desktop Windows (2000, XP, etc.) utilize ‘point and click’ navigation. On the WORKABOUT PRO, this is accomplished using a touchscreen and stylus rather than a mouse. 4.1.
Chapter 4: Working With Windows Mobile 5.0 Windows Mobile 5.0 Navigation Bar 4.2.1 Windows Mobile 5.0 Navigation Bar The navigation bar along the top of the screen provides icons that, when tapped, open their associated programs. Hotkeys Volume Control Start Button Connectivity Battery Capacity Figure 4.
Chapter 4: Working With Windows Mobile 5.0 Today’s Date, Clock And Alarm Volume Control Tapping on this icon displays a sliding tab that allows you to adjust the speaker volume or turn the speaker on and off. Battery Capacity Tapping on the Battery hotkey displays the Battery tab allowing you to view the remaining battery capacity in the main battery and the backup battery. 4.2.2 Today’s Date, Clock And Alarm This option displays the current date.
Chapter 4: Working With Windows Mobile 5.0 Today’s Date, Clock And Alarm The Clock & Alarms screen is displayed. • Tap on the drop-down menu arrows to set the GMT, time and date. An option to set the date and time for a visiting time zone is also available. To set an alarm: • Tap on the Alarms tab. You can set a maximum of three alarms. • Tap in the checkbox to enable an alarm. • Tap the day on which you want the alarm to go off–Sunday through Saturday. • Tap on the clock and set the time of the alarm.
Chapter 4: Working With Windows Mobile 5.0 Ownership Information 4.2.3 Ownership Information This option allows you to add your personal information to the WORKABOUT PRO. Some of this information will be displayed in the desktop Today screen. • Tap on Owner to display a screen in which you can type information. • Type your name, company name, address, telephone number and e-mail address.
Chapter 4: Working With Windows Mobile 5.0 Task Notification 4.2.5 Task Notification Tasks lets you create lists of entries representing your responsibilities, upcoming projects, and so on. If you’ve assigned any tasks, this option lets you know how many active tasks you have. Note: • You can synchronize the Task Notification option using ActiveSync so that any tasks are displayed on your WORKABOUT PRO as well as your PC. Refer to “ActiveSync Options” on page 261 for details.
Chapter 4: Working With Windows Mobile 5.0 Task Notification Figure 4.2 Task Details Screen Each of the nine items in this screen, when tapped, displays a dropdown menu where you can choose from a list of options. • Once you’ve completed all the appropriate fields, tap on OK to save your changes. Note: You can also tap on the Notes tab to add additional information about the task your are defining. Deleting A Task • • Press and hold the stylus on a task until a pop-up menu is displayed.
Chapter 4: Working With Windows Mobile 5.0 Calendar Of Upcoming Appointments You can choose All Tasks, Recently Viewed, No Categories, Active Tasks, or Completed Tasks. The tasks are displayed on the screen according to the preference you chose. 4.2.6 Calendar Of Upcoming Appointments This option is used to map out all your upcoming appointments, meetings and so on in the weeks, months and years ahead.
Chapter 4: Working With Windows Mobile 5.0 Creating And Editing Appointments 4.2.6.1 • Creating And Editing Appointments In the Calendar screen, tap on Menu in the softkey bar, and then tap on New Appointment. Figure 4.3 Appointment Detail Screen • • Note: • 4.2.6.2 • In the Subject field, name the appointment. Complete the remaining fields to reflect your appointment details. Refer to “Adding Reminders” on page 55 for details about reminders.
Chapter 4: Working With Windows Mobile 5.0 Using Categories If you want to be reminded in advance of an appointment: • In the Reminder field, choose Remind me from the drop-down menu. • In the second Reminder field, tap on the number in the field to display a dropdown menu where you can define a numeric value of 1, 5, 10, 15, 30. Tap on minute(s) to display a dropdown menu from which you can choose the time unit for your reminder–minute(s), hour(s), day(s) or week(s). • Tap OK to finish.
Chapter 4: Working With Windows Mobile 5.0 Deleting Appointments • Tap the Categories field to display the Categories screen. • Tap in the checkbox next to the category to which you want to assign the appointment. Tap OK. Your appointment is assigned to the category or categories you chose. • Note: 4.2.6.4 • • You can create a new category by tapping on New in the softkey bar at the bottom of the screen. Deleting Appointments Tap and hold the stylus on the appointment you want to delete.
Chapter 4: Working With Windows Mobile 5.0 Customising The Start Menu Start Button Navigation Bar Custom-chosen programs Most recently used programs Windows Mobile command centre • Tap on the Start menu item with which you want to work. 4.3.1 Customising The Start Menu You can choose the items you want to appear in the Start menu–items you use most often. • Tap on Start>Settings. 58 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 4: Working With Windows Mobile 5.0 Managing Files And Folders • In the Personal tab, tap on the Menus icon. • Tap the checkboxes next to the items you want to appear in your Start menu. When you’ve finished your selections, tap on OK. 4.4 Managing Files And Folders Windows Mobile 5.0 files are stored in folders and sub-folders that are accessible with File Explorer. You can open, save, rename, copy and paste files in the same manner as you would on any desktop PC. • Tap on Start>File Explorer.
Chapter 4: Working With Windows Mobile 5.0 Creating A New Folder 4.4.1 Creating A New Folder • • • Tap Start>Programs>File Explorer. Tap Menu>New Folder in the softkey bar at the bottom of the screen. Use the WORKABOUT PRO keyboard or the soft keyboard to assign a name to the folder. 4.4.2 Renaming A File • • Press and hold the stylus on the file you want to rename. A ring of dots is displayed followed by a pop-up menu. Tap Rename. The file name is highlighted. Type a new name. 4.4.
Chapter 4: Working With Windows Mobile 5.0 Using Menus 4.5 Using Menus In Windows Mobile 5.0, the menu is located in softkey bar at the bottom of the screen. Softkey Bar Menu To execute a command: • Tap on Menu to display the commands associated with it, and then tap on the command you want to execute. 4.5.1 Pop-Up Menus Pop-up menus are available in many screens and programs. They offer quick access to a group of useful commands in addition to those available in the menu bar.
Chapter 4: Working With Windows Mobile 5.0 The Softkey Bar • Gently press and hold the stylus on the screen. A ring of dots is displayed on the screen followed by a pop-up menu. • Tap on the command you want to execute. 4.6 The Softkey Bar The WORKABOUT PRO is equipped with a softkey bar at the bottom of the screen. It displays softkeys that allow you to access menus and commands. It also displays the soft keyboard icon.
Chapter 4: Working With Windows Mobile 5.0 The Softkey Bar The Soft Keyboard Icon Tapping on the soft keyboard icon displays an onscreen keyboard you can use as an alternative to the hand-held keyboard. Shift-State Indicator Icon The softkey bar can also display the shift-state indicator icon. This icon indicates active modifier keys–[SHIFT], [ALT], [CTRL], [ORANGE] and [BLUE]. • Tap on Start>Settings>Buttons>One Shots.
Chapter 4: Working With Windows Mobile 5.0 Programs–Using Applications 4.7 Programs–Using Applications • Tap Start>Programs to display the programs installed on your WORKABOUT PRO. Figure 4.4 Program Screen Icons Opening An Application • Tap on an icon in this screen to launch the associated program. Minimizing An Application • Note: Tap on the X button in the upper-right corner of an application screen to minimize the application.
Chapter 4: Working With Windows Mobile 5.0 Settings • • Tap on the application you want to shut down, and then tap on Stop. If you want to shut down all running applications, tap on Stop All. To display a program from this list on your screen, tap on Activate. 4.8 Settings • Tap Start>Settings to display the setting options for your hand-held. Figure 4.5 Settings Icons Settings are divided into three tabs–Personal, System and Connections.
Chapter 4: Working With Windows Mobile 5.0 Help 4.9 Help Tapping on the Help option displays a screen in which you can tap on the topic about which you require information. Keep in mind that this option is not always available. If you see a question mark icon in screen, help descriptions are available. 4.10 Entering Text Note: For additional information about tailoring text entry using the soft keyboard, the transcriber, the block recognizer and the letter recognizer, refer to “Input” on page 112.
Chapter 4: Working With Windows Mobile 5.0 Soft Keyboard 4.10.1 Soft Keyboard The soft keyboard is laid out just like the keypad on a PC keyboard. By tapping the stylus on letters and modifier keys like the [SHIFT] key, you can enter text in a document. If the soft keyboard is not already displayed: • Tap on the soft keyboard icon in the softkey bar. • Tap on the letters in the keyboard to enter text in your document.
Chapter 4: Working With Windows Mobile 5.0 The Transcriber The Transcriber menu and icon bars are displayed at the bottom of the document. Transcriber icon Figure 4.6 Transcriber Screen • Use your stylus to write a few words anywhere on the screen. After a few seconds, your words are recognized (or not) and are transcribed into typed text. Note: Character recognition is more successful if you write using large letters.
Chapter 4: Working With Windows Mobile 5.0 Block Recognizer And Letter Recognizer 4.10.3 Block Recognizer And Letter Recognizer While the Transcriber attempts to recognize natural handwriting and transcribe it, Block Recognizer and Letter Recognizer attempt to teach you how to conform your handwriting to what the hand-held can recognize. Block Recognizer • Open a document, and tap on the arrow next to the input icon. Choose Block Recognizer.
Chapter 4: Working With Windows Mobile 5.0 Block Recognizer And Letter Recognizer Letter Recognizer • Open a document, and tap on the arrow next to the input icon. Choose Letter Recognizer. Input Panel Recognizer Icon Bar Input Icon There are two points to remember when using Letter Recognizer. First, limit your writing to the Letter Recognizer Input Panel–do not write in the body of the document. Second, write only lowercase letters with your stylus.
CONNECTING TO A LAN WITH 802.11 5 5.1 Installing The 802.11g Radio. . . . . . . . . . . . . . . . . . . . . . . . . . 73 5.2 Configuring Your Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 5.3 Setting Up A RA2041 Radio–Summit Client Utility . . . . . . . . . . . . . 73 5.3.1 Assigning The IP Address . . . . . . . . . . . . . . . . . . . . . . . . 73 5.3.2 Using The SCU To Connect To The WLAN . . . . . . . . . . . . . . 74 5.4 SCU Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 5: Connecting To A LAN With 802.11 Installing The 802.11g Radio 5.1 Installing The 802.11g Radio Psion Teklogix provides two types of 802.11g Compact Flash (CF) wireless LAN radio cards for the WORKABOUT PRO: the RA2040 and the RA2041. Both models are Direct Sequence Spread Spectrum radios. The 802.11g CF card is easily installed in the WORKABOUT PRO. An instruction sheet is enclosed with each Psion Teklogix 802.11g radio to walk you through the installation steps. 5.
Chapter 5: Connecting To A LAN With 802.11 Using The SCU To Connect To The WLAN The Summit WLAN Adapter dialog box is displayed. You have two options: • Tap on Use server-assigned IP address to have an address assigned automatically, or If you want to use a particular IP address, tap on Use specific IP address, and type the preferred address.
Chapter 5: Connecting To A LAN With 802.11 Using The SCU To Connect To The WLAN • Tap on the Config tab. • • Tap on New to define a new config. Type a name for your configuration using any alpha-numeric combination to uniquely identify this config. Tap on OK to return to the Config tab. Tap on Commit to save the config name. When a pop-up message indicates that your configuration will be saved, tap on OK.
Chapter 5: Connecting To A LAN With 802.11 Using The SCU To Connect To The WLAN Important: Refer to “SCU Security Capabilities” on page 80 for details about security settings. Additional EAP details are described in “EAP Credentials” on page 82. To configure encryption: • Tap on the Encryption dropdown menu, and choose the appropriate type of encryption – Manual WEP, Auto WEP, WPA PSK, WPA TKIP, WPA2 PSK, WPA2 AES, and CCKM TKIP.
Chapter 5: Connecting To A LAN With 802.11 SCU Tabs 5.4 SCU Tabs This section provides a detailed description of each of the tabs available in the SCU – Main, Config, Status, Diags and Global Settings. 5.4.1 Main Tab The Main tab is displayed when you tap on the Start>Programs>SCU icon. • • • • • Enable/Disable Radio: Enables or disables the radio. This a toggle button; when the radio is enabled, this button reads Disable Radio, and when the radio is disabled, the button reads Enable Radio.
Chapter 5: Connecting To A LAN With 802.11 Config Tab 5.4.2 Config Tab The Config tab allows you to define radio and security settings that are stored in the registry as part of the configuration profile or config. The config you create and save is listed in the Active Config dropdown menu in the Main tab. You can define up to 20 configs. Radio Attributes • • • • • • 78 Config: Used to choose the config to be viewed or edited.
Chapter 5: Connecting To A LAN With 802.11 Config Tab The following table describes the options in the Radio Attributes dropdown menu: Radio Attribute Description Value Default Config Name of config (configuration profile). Use Rename button to change name. Maximum of 32 characters. None SSID Service set identifier (SSID) for WLAN to which the radio Maximum of 32 characters. connects. None Name assigned to radio & Client Name WORKABOUT PRO into which it is installed. Maximum of 16 characters.
Chapter 5: Connecting To A LAN With 802.11 Config Tab Radio Attribute Description Authentication credentials for the selected EAP type. Credentials Refer to “EAP Credentials” on page 82. Encryption • 5.4.2.1 Type of encryption used to protect transmitted data. Value Default User: Username or Domain/Username (up to 64 characters). None Password: up to 64 characters. For PEAP: CA Cert–CA server certificate filename.
Chapter 5: Connecting To A LAN With 802.11 Config Tab Common EAP types include: • EAP-TLS: Uses the same technology as a follow-on to Secure Socket Layer (SSL). It provides strong security, but relies on client certificates for user authentication. • PEAP: Provides secure user authentication by using a TLS tunnel to encrypt EAP traffic. Two different inner methods are used with PEAP: • EAP-MSCHAPV2, resulting in PEAP-MSCHAP: This is appropriate for use against Windows Active Directory and domains.
Chapter 5: Connecting To A LAN With 802.11 Config Tab 5.4.2.2 EAP Credentials Keep the following in mind when defining security settings: • If the credentials specified in the config are incorrect and that config is used, the authentication fails without an error message; you will not be prompted to enter correct credentials. • If the credentials are not specified in the config, when the radio tries to associate using that config, you will be prompted to enter the credentials.
Chapter 5: Connecting To A LAN With 802.11 Global Settings Tab 5.4.3 Global Settings Tab The Global Settings tab allows you to define radio and security settings that apply to all configs (profiles), along with settings that apply specifically to the SCU. The Global Settings in the table below can be edited in the SCU: Global Setting Description Value Default CCX features Activates three CCX features: AP-assisted roaming, AP-speciOn, Off fied maximum transmit power & radio management.
Chapter 5: Connecting To A LAN With 802.11 Global Settings Tab Global Setting Value Default Amount of time in milliseconds that passes without a response before ping request is considered a failure. Integer from 0 to 30000. 5000 Amount of time in milliseconds Ping Delays ms between successive ping requests. Integer from 0 to 7200000.
Chapter 5: Connecting To A LAN With 802.11 Status Tab 5.4.4 Status Tab The Status tab provides status information including IP address and MAC address for the client radio, IP address and MAC address for the AP, signal strength, channel, transmit power and data rate. 5.4.5 Diags Tab Ping Address Ping Results Use the Diags tab as a troubleshooting tool.
Chapter 5: Connecting To A LAN With 802.11 Setting Up A RA2040 CF Radio • • • Release/Renew: Obtains a new IP address through DHCP and logs all activity in the output area. Start Ping/Stop Ping: Starts a continuous ping to the address in the text box next to this button. This a toggle button so when you tap on it, it changes to Stop Ping. Closing this window or tapping on another button also stops the ping.
Chapter 5: Connecting To A LAN With 802.11 Setting Up A RA2040 CF Radio • Tap on Start>Settings. Tap on the Connections tab followed by the Wireless Power icon. This dialog box lists the radios and their connection status – Available (enabled) or Disabled. If the radio you want to set up is disabled, you’ll need to enable it before you can set up the radio. • Highlight the radio you want to enable in the dialog box. Tap on Enable.
Chapter 5: Connecting To A LAN With 802.11 Adding A New Network Setup • To choose a particular network listed in this dialog box, tap on the preferred network, and then tap on the Connect softkey in the softkey bar at the bottom of the dialog box. Softkey 5.5.1 Adding A New Network Setup • • To create a new network, tap on Start>Settings>Connections tab. Tap on the Wireless Power icon. In the Wireless Power tab, tap on Settings>Add new. • In the Network name field, type a network name.
Chapter 5: Connecting To A LAN With 802.11 Network Authentication Settings 5.5.2 Network Authentication Settings Contact your network administrator for the appropriate authentication information. • Tap on the dropdown menu next to Authentication to display your options. Authentication 802.11 supports four subtypes of network authentication services: Open, Shared, WPA, and WPA-PSK. Under Open authentication, any wireless station can request authentication.
Chapter 5: Connecting To A LAN With 802.11 Network Authentication Settings Under Shared authentication, each wireless station is assumed to have received a secret shared key over a secure channel that is independent from the 802.11 wireless network communications channel. Under WPA and WPA-PSK authentication, the use of 802.1x authentication is required. For wireless networks without a Remote Authentication Dial-In User Service (RADIUS) infrastructure, WPA supports the use of a preshared key.
Chapter 5: Connecting To A LAN With 802.11 Network Authentication Settings • To assign a Network key, uncheck the checkbox to the left of The key is automatically provided. Uncheck this option to access Network Key & Key Index fields. Key Index This field is used to identify the WEP key. • Choose a value from 1 to 4 in the dropdown menu next to this option. • Tap on the Next softkey to move to the next dialog box. 5.5.2.1 IEEE 802.
Chapter 5: Connecting To A LAN With 802.11 Deleting A Network Keep in mind also that some authentication protocols require that you select a Certificate. By tapping on the Properties button, you will be able to choose a Certificate. • Tap on Finish once you’ve completed the setup process. 5.5.3 Deleting A Network Your WORKABOUT PRO keeps a record of each wireless network to which it connects. The Wireless Networks box in the Wireless tab can get quite full.
6 SETTINGS 6.1 Personal Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 6.2 App Launch Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 6.3 Buttons Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 6.3.1 Up/Down Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 6.3.2 One Shots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 6.3.3 Keyboard Macro Keys . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 6: Settings 6.13.1 Battery Power . 6.13.2 External Power 6.13.3 Intensity . . . . 6.14 Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 . 123 . 123 . 124 6.14.1 Choosing A Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . 125 6.15 Clock & Alarms . . . . . . . .
Chapter 6: Settings 6.25.1.3 Decoded (Internal) 2D Scanning Options . . . . . . . . . . . 144 6.25.1.4 Data Options — Decoded (Internal) Scanner . . . . . . . . . 145 6.25.1.5 Code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 6.25.1.6 Code 128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 6.25.1.7 EAN 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 6.25.1.8 EAN 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 6.25.1.9 UPC A . . . . . . . . . . .
Chapter 6: Settings 6.25.2.18 Discrete 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . 170 6.25.2.19 Telepen . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 6.25.2.20 RSS Code (Reduced Space Symbology) . . . . . . . . . . 171 6.25.2.21 PosiCode (Reduced Space Symbology) . . . . . . . . . . 172 6.25.2.22 Composite . . . . . . . . . . . . . . . . . . . . . . . . . . 172 6.25.2.23 TLC-39 . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 6.25.2.24 PDF-417 . . . . . . . . . . . . . . .
Chapter 6: Settings 6.25.3.12 MSI Plessey. . . . . . . . . . . . . . . . . . . . . . . . . . 189 6.25.3.13 Code 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 6.25.3.14 Interleaved 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . 190 6.25.3.15 Matrix 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . 191 6.25.3.16 Discrete 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . 192 6.25.3.17 Telepen . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 6.25.3.
Chapter 6: Settings 6.25.5 Options Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 6.25.5.1 Double Click Parameters . . . . . . . . . . . . . . . . . . . 206 6.25.5.2 Display Parameters . . . . . . . . . . . . . . . . . . . . . . 206 6.25.6 Translations Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 6.25.6.1 Case Rules . . . . . . . . . . . . . . . . . . . . . . . . . . 209 6.25.7 Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 6.25.7.
Chapter 6: Settings 6.31.7 Selecting A Network . . . . . . . . . . . . . . . . . . . . . . . . . 237 6.31.8 Proxy Server Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 238 6.31.8.1 Changing Advanced Proxy Server Settings . . . . . . . . . . 239 6.32 Wireless Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 6.33 Wireless WAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 6.33.1 Softkey Bar Icons. . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 6: Settings Personal Settings The Settings screen is divided into three tabs–Personal, System and Connections • Tap on Start>Settings to display this screen. Figure 6.1 Settings Tabs 6.1 Personal Settings The Personal tab allows you to tailor the general behaviour of your WORKABOUT PRO such as defining input methods, Start menu options, owner information, password assignment, sound specifications, and so on. 6.
Chapter 6: Settings App Launch Keys To assign an application key: • Tap the Add button. • Press the key you want to use to launch an application. (If an unsupported key is pressed, a message appears on this screen letting you know.) The cursor moves to the App field and a new screen is displayed where you can choose the application to which you want to assign the application key. If you need to, you can Browse through the information in your hand-held until you locate the application you want to launch.
Chapter 6: Settings Buttons Icon document in the Word Mobile application, you need to browse to and choose that document while the cursor is in the Data field. • Tap on OK. • • If you need to Edit, Remove or Add another App Launch Key, you can do it from this final screen. Otherwise, tap on OK to save you Application Launch Key. To launch the application you chose, press the application key you assigned. 6.3 Buttons Icon • Note: Tap on this icon to display your options.
Chapter 6: Settings One Shots repeats while sliding the bar to the right increases the repeat delay time. Sliding the Repeat rate bar to the left slows the rate at which a key repeats when pressed. Sliding the bar to the right increases the key repeat rate. 6.3.2 One Shots The options in this tab allows you to determine how modifier keys on your WORKABOUT PRO behave.
Chapter 6: Settings Keyboard Macro Keys OneShot/Lock OneShot/Lock allows you to combine these functions. When you choose this option and you press the modifier key once, it remains active only until the next key is pressed. If you press the modifier key twice, it is locked ‘on’, remaining active until the modifier key is pressed a third time to turn it ‘off’.
Chapter 6: Settings Keyboard Macro Keys A Record Macro screen is displayed. • • Type the macro sequence you want to assign to the Macro key. You can type text and numbers, and you can program the function of special keys into a macro. When you’ve finished recording your macro sequence, tap on the Stop Recording button. A new screen–Verify Macro–displays the macro sequence you created. • Tap on the Save button to save your macro. Your macro key sequence is listed in the Macro screen.
Chapter 6: Settings Unicode Mapping 6.3.4 Unicode Mapping • Tap on the Unicode Mapping tab to display this screen. The Unicode Mapping tab is used to map combinations of virtual key values and [CTRL] and [SHIFT] states to Unicode™ values. This tab shows the configured Unicode character along with the Unicode value. For example, “a (U+0061)” indicates that the character “a” is represented by the Unicode value “0061”, and so on.
Chapter 6: Settings Scancode Remapping Adding And Changing Unicode Values Important: Changes to Unicode mappings are not saved until you exit the Unicode Mapping tab by tapping on [OK]. • Tap on the Add/Change button. • • Highlight a value in the Unicode mapping list. Position the cursor in the Unicode Mapping field, and type a Unicode value for the highlighted key. Note: To add a shifted state–[SHIFT] and/or [CTRL], tap on the checkbox next to ‘SHIFT Pressed’ and/or ‘CTRL Pressed’.
Chapter 6: Settings Scancode Remapping There are three different tables of scancode mappings: the Normal table, the Blue table and the Orange table. The Normal table defines unmodified key presses; the Blue table defines key presses that occur when the [BLUE] modifier is on; the Orange table defines key presses that occur when the [ORANGE] modifier is on. The default mappings of these scancodes can be overwritten for each of these three tables using the Scancode Remapping tab.
Chapter 6: Settings Scancode Remapping The Remap Scancode dialog box is displayed. • Note: Type the scan code in hexidecimal in the field labelled Scancode. The ‘Label’ field displays the default function of the scancode you are remapping. Virtual Key, Function And Macro The radio buttons at the bottom of the dialog box allow you to define to what the scan code will be remapped to: Virtual Key, Function or Macro.
Chapter 6: Settings Lock Sequence Removing A Remap • • In the Scancode Remapping tab, highlight the scancode you want to delete, and tap on the Remove button. Tap on OK. 6.3.6 Lock Sequence The Lock Sequence tab allows you to lock the hand-held keyboard to prevent keys from being pressed accidentally when, for example, the unit is inserted in a holster. • • • Note: To lock the keyboard, tap in the checkbox next to Enable key lock sequence. Tap in the checkbox next to Keyboard locked at startup.
Chapter 6: Settings Input A locked keyboard icon is displayed in the softkey bar when the keyboard is locked. Locked Keyboard Icon • Type the key sequence to unlock the keyboard. 6.4 Input This icon provides access to text input options you can use to tailor the soft keyboard, block recognizer, letter recognizer and transcriber along with voice recording options. 6.4.
Chapter 6: Settings Input Method Tab Block Recognizer Block Recognizer teaches you how to conform your handwriting to what the handheld can recognize. Important: Refer to “Block Recognizer And Letter Recognizer” on page 69 for additional details. Keyboard Options This screen is displayed when you choose Keyboard in the Input method drop-down menu. You can use it to customize the soft keyboard.
Chapter 6: Settings Input Method Tab To display additional letter recognition options, tap on the Options button in the Letter Recognizer screen. Figure 6.2 Letter Recognizer Quick Settings These options allow the Letter Recognizer to better interpret any specialized strokes and accents you may wish to use. Transcriber Options When you choose Transcriber as the input method, three tabs of options are available to you–Quick Settings, Inking and Advanced.
Chapter 6: Settings Input Method Tab Inking In the Inking tab, you are presented with a number of options. Recognition Delay allows you to determine the time delay between writing something on the Transcriber screen and its recognition into printed text. Enabling Add space after automatically adds a space after each word you write. The Pen option allows you to choose the line Width and Colour.
Chapter 6: Settings Options–Additional Choices 6.4.1.1 Word Completion This tab speeds the writing process regardless of which input method you choose. When you begin entering a word, this option displays what it assumes is the complete word. You can tap on the word presented rather than typing it in its entirety. 6.4.
Chapter 6: Settings Lock 6.5 Lock To protect the data stored in your WORKBOUT PRO, you can assign a password that must be entered each time the unit is switched on. • Tap on Start>Settings, and then tap on the Lock icon. Warning: • • • • It is critical that you store your password in a safe place. If you forget it, a ‘clean start’ must be performed. A clean start returns the hand-held to factory settings. Only the data stored in a CF or SD memory card are preserved.
Chapter 6: Settings Menus • Tap on OK. A dialog box asks whether or not you want to save you password settings. Tap on YES to save your password assignment. 6.6 Menus Tapping on Start>Settings>Menu icon displays options to customise menus. 6.6.1 Start Menu Tab This tab allows you to define the items that will be listed in your Start menu. • In the Start Menu tab, tap on the items you want to appear in your Start menu. The checked items will be listed in your Start menu. 6.
Chapter 6: Settings Sound & Notifications 6.8 Sound & Notifications This icon allows you to specify when your WORKABOUT PRO will emit sounds. 6.8.1 Sounds • Tap in the checkboxes and radio buttons to enable the event(s) that will cause your unit to emit a sound. 6.8.2 Notifications This tab allows you to determine how you are notified about different events. • Choose an event from the Events drop-down menu.
Chapter 6: Settings Today Screen 6.9 Today Screen This icon allows you to tailor the appearance of the Today screen– the desktop screen. 6.9.1 Appearance This screen allows you to customize the background displayed on the Today screen. • Choose the background you want to use from the list. 6.9.2 Items This tab allows you to choose and sort the items that will be listed in the Today screen. 120 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 6: Settings System Tab Settings • • Tap in the checkbox to the left of the items you want displayed in the Today screen. To rearrange the list of items, highlight the item you want to move up or down and tap on the Move Up or Move Down button. Keep in mind that the Date cannot be moved. 6.10 System Tab Settings To display the icons grouped in the System tab: • Tap on Start>Settings, and tap on the System tab. 6.
Chapter 6: Settings About Device Copyrights The Copyright tab lists the copyright information for the software loaded on your WORKABOUT PRO. 6.12 About Device Tapping on the About Device icon under Settings>System tab provides access to three tabs related to your WORKABOUT PRO. The Properties tab lists hardware information related to your WORKABOUT PRO. The Copyright tab lists the copyrights that apply to your hand-held.
Chapter 6: Settings External Power • • Tap on the dropdown menu, and choose the number of seconds or minutes the backlight will remain on when the hand-held is idle. To Turn on backlight when a button is pressed or the screen is tapped, tap in the checkbox to the left of this option. 6.13.2 External Power This tab determines the behaviour of the backlight when the hand-held is using external rather than battery power. Refer to “Battery Power” on page 122 for details about these options. 6.13.
Chapter 6: Settings Certificates 6.14 Certificates • • Tap on Start>Settings, and then tap on the System tab. Tap on the Certificates icon. A public key is transmitted as part of a certificate. The certificates listed in the Certificates tabs ensure that the submitted public key is, in fact, the public key that belongs to the submitter. The hand-held checks that the certificate has been digitally signed by a certification authority that the hand-held explicitly trusts.
Chapter 6: Settings Choosing A Certificate Root Certificates • • • To view details about a certificate—who issued the certificate, to whom it was issued, the issue date and the expiry date—tap on a certificate in the list. To delete a certificate, tap and hold the stylus on a certificate. In the pop-up menu, tap on the Delete command. 6.14.1 Choosing A Certificate Normally, certificates already configured for your network are chosen automatically by the WORKABOUT PRO.
Chapter 6: Settings COM Port Manager 6.16 COM Port Manager The COM Port Manager dialog box lists the device names and COM port mappings stored in the registry for the currently active and for dynamic devices like port replicators, USB serial dongles and virtual ports. The COM Port Manager allows you to edit the COM port mappings and add new ports for Bluetooth external connections.
Chapter 6: Settings Error Reporting 6.17 Error Reporting Error Reporting allows you to enable or disable Microsoft error reporting prompts. 6.18 GPS – Global Positioning System With a Global Positioning System (GPS) receiver, you can locate your exact position on a map. However, even without a GPS receiver, several different mapping programs can run on your hand-held. • Tap on Start>Settings>System>GPS.
Chapter 6: Settings GPS – Global Positioning System Note: • Your WORKBOUT PRO may automatically detect the GPS receiver that you are using and enter the settings in the Hardware tab. If not, you’ll need to enter this information yourself. You can find this information in the user manual of the GPS receiver. Tap on the Hardware tab, and choose a GPS hardware port and the appropriate Baud rate. Windows Mobile 5.0 automatically manages access to the GPS receiver.
Chapter 6: Settings Manage Triggers 6.19 Manage Triggers Manage Triggers allows you to configure how bar code scanners and other devices such as RFID readers are triggered. You can configure the trigger ID for each trigger button for both single- and double-click, and the double-click time. • Tap on Start>Settings>Manage Triggers. 6.19.
Chapter 6: Settings Trigger Mappings Double-Click When a key is pressed and released, then pressed again within the configured time (between 0 to 1000 milliseconds), a double-click occurs. See also “Trigger Press Type” on page 132. Show All Modules By default, the trigger mapping list only shows active mappings. Mappings for drivers or applications that are not currently active are not normally displayed. By checking this checkbox, all mappings, both active and inactive, are displayed.
Chapter 6: Settings Trigger Mappings 6.19.1.1 Add And Edit Trigger Mapping • Tap on Add to add a new trigger map, or on Edit to edit an existing trigger map. Trigger Key This dropdown list allows you to specify the source of the trigger events, such as the Grip Trigger, Left Scan, etc., for the trigger module selected. Notes: It is possible to map the same source to different modules (trigger consumers—for example, to both the Imager and Non-Decoded Scanner.
Chapter 6: Settings Memory Add Key Only existing trigger sources are shown in the Source combo-box. To add a new source to this list, tap on the Add Key button. A dialog box pops up, allowing you to select the keyboard key to use as a trigger source. Trigger Press Type You can enable either an Up/Down or Double Click response to a trigger press. Normally, when a trigger (keyboard key, etc.
Chapter 6: Settings Main Tab 6.20.1 Main Tab This tab indicates the memory allocated for file and data storage and for program storage. 6.20.2 Storage Card The Storage Card screen indicates the total storage card or RAM disk memory along with the amount in use. WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 6: Settings Running Programs 6.20.3 Running Programs Running Programs behaves like the task manager found on your desktop PC, allowing you to activate or stop any running programs. • Highlight an application(s). • To end an application, tap on the Stop button. Tap on Stop All if you want to shut down all running applications, or To activate an application, tap on the Activate button. 6.21 Power Icon This icon allows you to view and manage battery use. 6.21.
Chapter 6: Settings Advanced Tab 6.21.2 Advanced Tab The Advanced tab allows you to manage battery consumption. On Battery Power When the WORKABOUT PRO is operating on battery power, this option allows you to determine how long the unit will remain on when it is not in use. • Tap in the checkbox to the left of On battery power to enable this option. Tap in the dropdown menu to choose the number of minutes your unit can remain idle before it shuts down.
Chapter 6: Settings Battery Details 6.21.3 Battery Details This tab lists the specifications and battery capacity status of the battery installed in the WORKABOUT PRO. This is a view-only screen. 6.21.4 Card Slots When you enable one or more of the options listed in this tab, power is supplied to the enabled slot(s). Tapping on the Apply button activates your choices. 136 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 6: Settings Built-In Devices 6.21.5 Built-In Devices This tab allows you to enable power to the device(s) installed in your unit. Keep in mind that the content of this screen varies depending on the devices installed in your hand-held. Tapping on OK activates your selections. 6.21.6 Suspend Threshold This applet allows you to determine the amount of battery power that you want to reserve in the main battery to protect the data stored in the WORKABOUT PRO.
Chapter 6: Settings Suspend Threshold 6.21.6.1 Suspend Threshold And Estimated Battery Backup The Estimated Battery Backup is the amount of battery power that is reserved to protect data until a charged battery can be installed in the hand-held. When the main battery capacity is depleted up to the Estimated Battery Backup reserve specified in the Suspend Threshold tab, the hand-held shuts off automatically and uses the reserve power to preserve the data stored on the WORKABOUT PRO.
Chapter 6: Settings Wakeup Keys Tab 6.21.7 Wakeup Keys Tab This option allows you to define which key can be pressed to wake the hand-held from a suspend state. 6.22 Regional Settings To display the Regional Settings screen, tap on Start>Settings, and then tap on the System tab followed by the Regional Settings icon. • Tap on the dropdown menu to choose your language and region.
Chapter 6: Settings Remove Programs 6.23 Remove Programs Tapping on the Remove Programs icon displays a screen listing the programs that can be removed from your unit. • To remove a program, highlight it and then click on the Remove button. 6.24 Screen Icon This icon allows you to align (calibrate) your touchscreen, turn ClearType on and off and adjust the size of the text displayed on the WORKABOUT PRO screen. • Tap Start>Settings>System tab, and then tap on the Screen icon.
Chapter 6: Settings Scanner Settings 6.25 Scanner Settings The Teklogix Scanners icon in the Settings menu provides access to dialog boxes in which you can tailor bar code options and choose the bar codes your scanner will recognize. • Tap on Start>Settings, and then tap on the System tab followed by the Teklogix Scanner icon.
Chapter 6: Settings Decoded (Internal) Scanners 6.25.1 Decoded (Internal) Scanners 6.25.1.1 Options — Decoded (Internal) Scanner Dot Time (msec) The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner switches to a normal scan sweep. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value of 0 msec, 200 msec or 400 msec. A value of 0 (zero) disables the target dot.
Chapter 6: Settings Decoded (Internal) Scanners 6.25.1.2 Decoded (Internal) Advanced Options Continuous Scan Mode Setting this parameter to ‘on’ keeps the laser on and continuously decoding as long as the scanner button is pressed and held down. Minimum Cancel Time The value assigned to this parameter determines the time delay before the scanner is turned off, once the scanner trigger or button is released.
Chapter 6: Settings Decoded (Internal) Scanners “Linear security level 1” specifies that the following code types must be successfully read twice before being decoded: Code Type Length Codabar All MSI Plessey 4 or less D 5 of 5 8 or less I 2 of 5 8 or less “Linear security level 2” specifies that all types of codes must be successfully read twice before being decoded.
Chapter 6: Settings Decoded (Internal) Scanners Note: These parameters are only used when either Programmable Raster or Always Raster is assigned to the “2D Scanning Mode” parameter. “2D Raster Height” and “2D Raster Expand Rate” are intended for very specific applications and are usually not required for normal scanning purposes. Double-tapping on this parameter displays a dialog box in which you can enter a value from 1 to 15. 6.25.1.
Chapter 6: Settings Decoded (Internal) Scanners ECI Decoder Setting this parameter to on enables the scanner to interpret any Extended Channel Interpretations (ECIs) supported by the scanner. This parameter has no effect on symbols that were not encoded using ECIs. If this parameter is set to off and a symbol that was encoded using an ECI escape is scanned, the scanner transmits the ECI escape followed by the uninterpreted data. 6.25.1.5 Code 39 Enabled Setting this parameter to on enables “Code 39”.
Chapter 6: Settings Decoded (Internal) Scanners Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be decoded by your scanner. Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 1 to 55.
Chapter 6: Settings Decoded (Internal) Scanners Decode Perf. Level This parameter provides three levels of decode performance or “aggressiveness” for Code 39 symbols. Increasing the performance level reduces the amount of required bar code orientation – this is useful when scanning very long and/or truncated bar codes. Keep in mind that increased levels reduce decode security.
Chapter 6: Settings Decoded (Internal) Scanners 6.25.1.6 Code 128 Enabled Set this parameter to on to enable “Code 128”. Enable GS1-128/GS1 US Previously UPC/EAN and UCC, these types of bar codes include group separators and start codes. Enable ISBT 128 To successfully scan this variation, “Enable ISBT 128” must be set to on. Decode Performance If this parameter is set to on, one of three decode levels assigned to the “Decode Performance Level” parameter can be selected. Decode Perf.
Chapter 6: Settings Decoded (Internal) Scanners Suffix Char This character, if non-zero, is added after a successfully decoded bar code. Press the key you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of the keypress is displayed. Strip Leading This parameter determines the number of characters that will be removed from the beginning of the bar code before the prefix character is added. Note: The appended character is treated as any other keyboard character.
Chapter 6: Settings Decoded (Internal) Scanners UPC-A, Preamble When you double-tap on this parameter, a dialog box is displayed where you can choose one of three options for lead-in characters for UPC-A symbols transmitted to the host device: System Char – system character transmitted with the data, Country code and System Char – both the country code (“0” for USA) and system character are transmitted with the data or None – no preamble is transmitted.
Chapter 6: Settings Decoded (Internal) Scanners Conv. UPC-E1 To UPC-A This parameter converts UPC-E1 (zero suppressed) decoded data to UPC-A format before transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). Prefix/Suffix Refer to page 149 for details. 6.25.1.11 UPC/EAN Shared Settings The parameters you set here are a shared across all available UPC and EAN bar codes.
Chapter 6: Settings Decoded (Internal) Scanners Security Level This parameter controls the tolerance for decoding edge-to-edge UPC/EAN bar codes. Double-tapping on this parameter displays a dialog box in which you can choose a level from 0 to 3. Lower values have a lower tolerance for misreads, but they also increase the time it takes to decode the bar code. Linear Decode “Linear Decode” applies to code types containing two adjacent blocks (e.g., UPCA, EAN-8, EAN-13).
Chapter 6: Settings Decoded (Internal) Scanners 6.25.1.13 Codabar Enabled Set this parameter to on to enable “Codabar” or off to disable it. Set Length L1 And Set Length L2 Lengths for “Codabar” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).
Chapter 6: Settings Decoded (Internal) Scanners Set Length L1 And Set Length L2 Lengths for “MSI Plessey” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be recognized by your scanner.
Chapter 6: Settings Decoded (Internal) Scanners Set Length L1 And Set Length L2 Lengths for “Interleaved 2 of 5” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be recognized by your scanner.
Chapter 6: Settings Decoded (Internal) Scanners Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 1 to 12. Field Size/Char Refer to page 148 for details. 6.25.1.17 RSS Code Enable Setting this parameter to on enables “2D RSS Code” scanning capability.
Chapter 6: Settings Decoded (Internal) Scanners A composite symbol includes multi-row 2D components making it compatible with linear and area CCD scanners along with linear and rastering laser scanners. The options available for this parameter represent multi-level components of a composite symbol. Enable CC-C And Enable CC-AB To activate these components, set these parameters to on. Enable TLC-39 This composite component integrates MicroPDF417 with the linear code.
Chapter 6: Settings Decoded (HHP) If Code 128 Emulation is set to off, the Micro PDF-417 symbols are transmitted with one of the following prefixes: ]L3 if the first codeword is 903-907, 912, 914, 915 ]L4 if the first codeword is 908 or 909 ]L5 if the first codeword is 910 or 911 Field Size/Char Refer to page 148 for details. 6.25.2 Decoded (HHP) 6.25.2.
Chapter 6: Settings Decoded (HHP) Minimum Cancel Time The value assigned to this parameter determines the time delay before the scanner is turned off, once the scanner trigger or button is released. This gives the scanner a minimum amount of time to complete its current decode before the scan is cancelled when the user quickly triggers on/off. Low Power Timeout To extend laser life, you can select the length of time the scanner remains active following a successful decode.
Chapter 6: Settings Decoded (HHP) Minimum And Maximum Length Minimum and Maximum lengths for the bar code can be set from 0 to 48. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Append If this parameter enabled, any Code 39 bar code that contains a space as the first character will be “stored in memory”.
Chapter 6: Settings Decoded (HHP) ISBT Concatenation These codes are not concatenated by default. You need to set this parameter to on to send concatenated code. Minimum And Maximum Length The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 0 to 80. Field Size/Char Refer to page 148 for details. 6.25.2.
Chapter 6: Settings Decoded (HHP) ISBN Translate When this parameter (International Standard Book Number) is enabled, the first 3 characters (‘978’) are ignored and the checksum (0.9, ‘X’) is calculated on the remaining characters. Prefix/Suffix Refer to page 149 for details. 6.25.2.7 EAN 8 Enabled Set this parameter to on to enable “EAN 8”. Check Digit If you enable this parameter, a check digit is included with the decoded bar code data.
Chapter 6: Settings Decoded (HHP) 6.25.2.8 UPC A Settings Enabled Set this parameter to on to enable “UPC A” bar code scanning recognition. Check Digit If you enable this parameter, a check digit is included with the decoded bar code data. Transmit Number System If this parameter is enabled, the number system digit is transmitted with the decoded bar code data. Addendum Add-on 2 And Addendum Add-on 5 An addendum is a separate bar code, supplementary to the main bar code.
Chapter 6: Settings Decoded (HHP) Expand This parameter expands the UPC E code to a 12 digit UPC-A format. Check Digit If you enable this parameter, a check digit is included with the decoded bar code data. Transmit Number System If this parameter is enabled, the number system digit is transmitted with the decoded bar code data. Addendum Add-on 2 And Addendum Add-on 5 An addendum is a separate bar code, supplementary to the main bar code.
Chapter 6: Settings Decoded (HHP) 6.25.2.11 Code 93 Enabled Set this parameter to on to enable “Code 93”. Minimum And Maximum Length The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 0 to 80. Field Size/Char Refer to page 148 for details. 6.25.2.12 Codabar Enabled Set this parameter to on to enable “Codabar”.
Chapter 6: Settings Decoded (HHP) Concatenation “Codabar” supports symbol concatenation. When you enable Concatenation, the imager looks for a Codabar symbol with a “D” start character that is adjacent to a symbol with a “D” stop character. In this case, the two messages are concatenated into one with the “D” characters omitted. Minimum And Maximum Length The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).
Chapter 6: Settings Decoded (HHP) Plessey Minimum And Plessey Maximum Length These parameters apply to Plessey bar codes.The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 4 to 48. Field Size/Char Refer to page 148 for details. 6.25.2.14 Code 11 Enabled Set this parameter to on to enable “Code 11”.
Chapter 6: Settings Decoded (HHP) Check Digit When this parameter is set to Validate only, the integrity of a symbol is checked to ensure that it complies with specified algorithms. If “Check Digit” is set to Validate and Transmit, the check digit is validated and transmitted with the data. Setting this parameter to None disables this function. Minimum And Maximum Length The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).
Chapter 6: Settings Decoded (HHP) Minimum And Maximum Length The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 48. Field Size/Char Refer to page 148 for details. 6.25.2.18 Discrete 2 of 5 Enabled Set this parameter to on to enable “Discrete 2 of 5”.
Chapter 6: Settings Decoded (HHP) Minimum And Maximum Length The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 60. Field Size/Char Refer to page 148 for details. 6.25.2.20 RSS Code (Reduced Space Symbology) Enable Setting this parameter to on enables “RSS Code” scanning capability.
Chapter 6: Settings Decoded (HHP) 6.25.2.21 PosiCode (Reduced Space Symbology) Enable Setting this parameter to on enables “PosiCode” scanning capability. PosiCode “PosiCode” is a “position” based symbology. A position based symbology decouples the widths of the bars from their positions. The centers of the bars are specified to be laid out on a grid of equally spaced parallel lines.
Chapter 6: Settings Decoded (HHP) “GS1-128” uses a series of Application Identifiers to include additional data such as best before dates, batch numbers, quantities, weights and many other attributes needed by the user. EAN/UCC 128 Emulation The options in this parameter allow you to turn this emulation on or off, or to enable RSS Emulation. Minimum And Maximum Length The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).
Chapter 6: Settings Decoded (HHP) 6.25.2.25 Micro PDF-417 Enabled Set this parameter to on to enable “Micro PDF-417”. Minimum And Maximum Length The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 366. Field Size/Char Refer to page 148 for details. 6.25.2.
Chapter 6: Settings Decoded (HHP) 6.25.2.27 Code 49 The “Code 49” bar code is a multiple-row bar code that can encode the full ASCII character set below ASCII 128. Up to 49 alphanumeric characters or 81 numeric characters can be encoded into two to eight rows. Each row is divided by a separator bar. The top and bottom of the symbol also have separator bars that extend to the ends of the minimum quiet zones. Enabled Set this parameter to on to enable “Code 49”.
Chapter 6: Settings Decoded (HHP) Minimum And Maximum Length The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays a screen in which you can set the minimum and maximum allowable code lengths – 1 to 1500. Field Size/Char Refer to page 148 for details. 6.25.2.30 2D QR Code Enabled Set this parameter to on to enable “2D QR Code”.
Chapter 6: Settings Decoded (HHP) 6.25.2.32 2D Aztec Enabled Set this parameter to on to enable “2D Aztec”. Aztec Runes Aztec Runes, the smallest type of Aztec Code symbol, has the ability to encode a very short license plate message. Minimum And Maximum Length The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).
Chapter 6: Settings Decoded (HHP) Field Size/Char Refer to page 148 for details. 6.25.2.35 Postal: Australian Enabled Set this parameter to on to enable “Postal: Australian”. Field Size/Char Refer to page 148 for details. 6.25.2.36 Postal: Canadian Enabled Set this parameter to on to enable “Postal: Canadian”. Field Size/Char Refer to page 148 for details. 6.25.2.37 Postal: China Enabled Set this parameter to on to enable “Postal: China”.
Chapter 6: Settings Decoded (HHP) Field Size/Char Refer to page 148 for details. 6.25.2.39 Postal: Kix Enabled Set this parameter to on to enable “Postal: Kix”. Field Size/Char Refer to page 148 for details. 6.25.2.40 Postal: Korean Enabled Set this parameter to on to enable “Postal: Korean”. Minimum And Maximum Length The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).
Chapter 6: Settings Decoded (Intermec ISCP) 6.25.3 Decoded (Intermec ISCP) • Tap on the Scanner dropdown menu, and choose Decoded (Intermec ISCP). 6.25.3.1 Options — Decoded (Intermec ISCP) Scanner Laser On Time The value assigned to this parameter determines how long the laser will remain on when the scan button or trigger is pressed. Double-tapping on this parameter displays a dialog box in which you can enter a value between 1 and 10 seconds. 6.25.3.
Chapter 6: Settings Decoded (Intermec ISCP) Low Power Timeout To extend laser life, you can select the length of time the scanner remains active following a successful decode. The scanner wakes from low power mode when a bar code is scanned – a successful decode restores normal blinking. When you double-tap on this parameter, a dialog box is displayed in which you can choose a value of 30 sec, 1 min, 2 min or 3 min.
Chapter 6: Settings Decoded (Intermec ISCP) Reading Range Determines the reading distance from which a bar code can be successfully scanned. The default setting, Extended, allows for increased reading distance. Start/Stop Transmit Setting this parameter to on enables the transmission of start and stop characters, which are usually not transmitted. Code 39 can start and end with either a * or a $ character (see also next parameter Accepted Start Char).
Chapter 6: Settings Decoded (Intermec ISCP) 6.25.3.4 Code 128 Enable Setting this parameter to on enables “Code 128”. GS1-128 “GS1-128” is the GS1 implementation of the Code 128 barcode specification. The former correct name was UCC/EAN-128. GS1-128 Identifier “GS1-128 Identifier” allows the AIM ID " ]C1" for EAN 128 to be transmitted or removed. By default, this identifier is transmitted if EAN 128 is enabled.
Chapter 6: Settings Decoded (Intermec ISCP) transmitted. Choosing Concatenated or Single transmits single codes or concatenated codes. If only one code of a pair is read, that code will be transmitted as a single code. If both codes in a pair are detected, they will be concatenated provided that ISBT Concat Any Pair (see below) is enabled. ISBT Concat Any Pair Enabling this parameter causes all code pairs that can be, to be concatenated even if they do not comply with Section 4.
Chapter 6: Settings Decoded (Intermec ISCP) ISBN Conversion When this parameter (International Standard Book Number) is enabled, the first 3 characters (‘978’) are ignored and the checksum (0.9, ‘X’) is calculated on the remaining characters. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled. Prefix/Suffix Refer to page 149 for details. 6.25.3.6 EAN 8 Enabled Set this parameter to on to enable “EAN 8”.
Chapter 6: Settings Decoded (Intermec ISCP) Convert To EAN 13 If this parameter is enabled, a UPC A bar code is converted to EAN 13. Prefix/Suffix Refer to page 149 for details. 6.25.3.8 UPC E Settings Enabled Set this parameter to on to enable “UPC E”. Enable UPC-E1 Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans. Transmit Check Digit If the check digit is to be transmitted with the data, this parameter must be enabled.
Chapter 6: Settings Decoded (Intermec ISCP) Addendum An addendum is a separate bar code, supplementary to the main bar code. This parameter provides two options: Not Required but Transmitted if Read or Required and Transmitted. • Double-tap on Addendum to display a dialog box listing your options. • Highlight an item, and tap on OK. When “Addendum” is set to Not Required but Transmitted if Read, the scanner searches for an addendum and if one exists, appends it to the main bar code.
Chapter 6: Settings Decoded (Intermec ISCP) Minimum Length Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/Char Refer to page 148 for details. 6.25.3.11 Codabar Enabled Set this parameter to on to enable “Codabar”.
Chapter 6: Settings Decoded (Intermec ISCP) Set Length L1, Set Length L2, And Set Length L3 Lengths for “Codabar” can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Double-tapping on these parameters displays dialog boxes where you can define the code length that will be recognized by your scanner. Length Mode You can choose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.
Chapter 6: Settings Decoded (Intermec ISCP) Plessy Minimum Length Minimum lengths for the Plessy bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/Char Refer to page 148 for details. 6.25.3.13 Code 11 Enabled Set this parameter to on to enable “Code 11”. Check Digit Verification The available options for this parameter are MOD 10 Check and Double MOD 10 Check.
Chapter 6: Settings Decoded (Intermec ISCP) Reading Range This parameter determines the reading distance from which a bar code can be successfully scanned. The default setting, Extended, allows for increased reading distance. Check Digit Verification The available options for this parameter are Disabled, MOD 10 Check and French CIP. “Check Digit Verification” uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting.
Chapter 6: Settings Decoded (Intermec ISCP) Minimum Length Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/Char Refer to page 148 for details. 6.25.3.16 Discrete 2 of 5 Enabled Set this parameter to on to enable “Discrete 2 of 5”.
Chapter 6: Settings Decoded (Intermec ISCP) 6.25.3.17 Telepen Enabled Set this parameter to on to enable “Telepen”. Format This parameter allows you to set the bar code character format to either ASCII or Numeric. Minimum Length Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s). Field Size/Char Refer to page 148 for details. 6.25.3.
Chapter 6: Settings Decoded (Intermec ISCP) Field Size/Char Refer to page 148 for details. 6.25.3.19 PDF-417 Enabled Set this parameter to on to enable “PDF-417”. Field Size/Char Refer to page 148 for details. 6.25.3.20 Micro PDF-417 Enabled Set this parameter to on to enable “Micro PDF-417”. Code 128 Emulation When this parameter is enabled, the scanner transmits data from certain Micro PDF417 symbols as if it was encoded in Code 128 symbols.
Chapter 6: Settings Imager 6.25.3.21 Codablock Enable Codablock A Set this parameter to on to enable “Codablock type A”. Enable Codablock F Set this parameter to on to enable “Codablock type F”. Field Size/Char Refer to page 148 for details. 6.25.4 Imager • Tap on the Scanner dropdown menu, and choose Imager. 6.25.4.1 Options – Imager TekImager Enabled Setting this option to on enables the imager installed in your hand-held.
Chapter 6: Settings Imager Center Bar Code Only Note: This parameter must be disabled when reading Composite bar codes. When more than one bar code is visible in a single snap shot, this parameter allows you to specify that only the centre image within the imager framing marker be read. When this parameter is set to on, the target dot is pointed at the centre image and only that image is returned.
Chapter 6: Settings Imager 6.25.4.2 Advanced Options – Imager Important: Do not adjust the advanced options without first consulting Psion Teklogix technical support. Factory Defaults On Reboot The value assigned to this parameter determines whether or not the driver will restore the factory defaults to the imager device on the next reboot. Note: The driver will default the imager device on a ‘clean’ reset, regardless of the value of this parameter.
Chapter 6: Settings Imager Fast Converge Note: “Auto Exposure” must be set to ‘on’ in order for this parameter to function. Keep in mind that while this parameter can improve imager performance, “Fast Converge” increases battery power consumption. Setting this parameter to on speeds the “Auto Exposure” process. It allows the imager to rapidly snap a number of bar code capture attempts while finding ideal values for gain, integration and illumination.
Chapter 6: Settings Imager Adaptive Windowing “Adaptive Windowing” is an advanced technique used to speed up bar code recognition in certain applications. This parameter automatically reduces the size of the window to the user-programmed window size when it successfully decodes (which reduces decode time the next time it is used), but increases it to the full size window (1280x1024 for SX5303) on a failed decode.
Chapter 6: Settings Imager 6.25.4.5 EAN 13 Enabled Set this parameter to on to enable “EAN 13”. Addendum An addendum is a separate bar code, supplementary to the main bar code. This parameter provides three options: Disabled, Optional and Required. Depending on the value chosen for this parameter, an addendum is recognized or ignored. • Double-tap on Addendum to display a dialog box listing your options. • Highlight an item, and tap on OK.
Chapter 6: Settings Imager 6.25.4.7 UPC A Enabled Set this parameter to on to enable “UPC A”. Addendum Refer to “Addendum” on page 200. Prefix/Suffix Refer to page 149 for details. 6.25.4.8 UPC E Enabled Set this parameter to on to enable “UPC E”. Addendum Refer to “Addendum” on page 200. Prefix/Suffix Refer to page 149 for details. 6.25.4.9 Code 93 Enabled Set this parameter to on to enable “Code 93”. Field Size/Char Refer to page 148 for details. 6.25.4.
Chapter 6: Settings Imager 6.25.4.11 Interleaved 2 of 5 Enabled Set this parameter to on to enable “Interleaved 2 of 5”. Field Size/Char Refer to page 148 for details. 6.25.4.12 RSS Code (Reduced Space Symbology) Enable Setting this parameter to on enables “RSS Code” scanning capability. Field Size/Char Refer to page 148 for details. 6.25.4.13 Composite Important: To successfully read this type of bar code, the two types of symbologies included in a composite bar code must be enabled.
Chapter 6: Settings Imager 6.25.4.15 Micro PDF-417 Enable Setting this parameter to on enables “Micro PDF-417” bar code scanning. Micro PDF-417 is a multi-row symbology that is useful for applications requiring greater area efficiency but lower data capacity than PDF-417. Field Size/Char Refer to page 148 for details. 6.25.4.16 2D Data Matrix Enable Set this parameter to on to enable “Data Matrix”. Field Size/Char Refer to page 148 for details. 6.25.4.
Chapter 6: Settings Imager Field Size/Char Refer to page 148 for details. 6.25.4.20 Postal: PlaNET Enabled Set this parameter to on to enable “Postal: PlaNET”. Field Size/Char Refer to page 148 for details. 6.25.4.21 Postal: PostNET Enabled Set this parameter to on to enable “Postal: PostNET”. Field Size/Char Refer to page 148 for details. 6.25.4.22 Postal: Australian Enabled Set this parameter to on to enable “Postal: Australian”. Field Size/Char Refer to page 148 for details. 6.25.4.
Chapter 6: Settings Options Tab 6.25.4.24 Postal: Korean Enabled Set this parameter to on to enable “Postal: Korean”. Field Size/Char Refer to page 148 for details. 6.25.4.25 Postal: Royal Enabled Set this parameter to on to enable “Postal: Royal”. Field Size/Char Refer to page 148 for details. 6.25.5 Options Tab This tab allows you to tailor the double-click parameters and the display options associated with your scanner. WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 6: Settings Options Tab 6.25.5.1 Double Click Parameters Click Time (msec) This parameter controls the maximum gap time (in milliseconds) for a double-click. If the time between the first and second clicks of the scanner trigger is within this time, it is considered a double-click. The allowable range is 0 to 1000. A value of zero disables this feature. A double-click produces different results depending on whether or not a value is assigned in the “Click Data” parameter.
Chapter 6: Settings Translations Tab Note: To remove the scan result from the screen before the “Result Time” has expired, point the scanner away from the bar code and press the trigger. Good Scan Beep And Bad Scan Beep These parameters determine whether or not the hand-held emits an audible scanner ‘beep’ when a good (successful) scan or a bad (unsuccessful) scan is performed. Set these parameters to either on to enable the beeper or off to disable it.
Chapter 6: Settings Translations Tab 208 • In the Translation tab, tap on the Case # to create rules. • Tap on the No rule dropdown menu to display the rules. WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 6: Settings Translations Tab When you choose a rule, an associated screen is displayed in which you can define the rule. 6.25.6.1 Case Rules The case rules are defined as follows: • No rule – ignored. • Search and replace – replaces all instances of the match string. (Note that this rule cannot fail.) • Match at index – matches the match string at a specified index. • Match and replace at index – matches the match string at a specified index and replaces/changes it.
Chapter 6: Settings Ports 6.25.7 Ports While you cannot configure the scanner, you can configure communications with a serial decoded scanner using the options in this tab. Use these settings to ensure that the communication ports on the WORKABOUT PRO match the settings of the serial devices to which they are connected. If the settings do not match exactly, the devices may not function.
Chapter 6: Settings Ports 6.25.7.1 Port Replicator Port A (COM5) Enabled This parameter allows you to turn this port on (enable) and off. Baud Double-tapping on this parameter displays a pop-up window in which you can choose an appropriate baud rate. Data Bits This parameter determines the number of data bits included in each asynchronous data byte. Most devices use 8 bit data bytes. Double-tapping on this option displays a pop-up window in which you can choose either 7 or 8 data bits.
Chapter 6: Settings Ports Parity This parameter determines the type of parity checking used on the data going through the tether port. Double-tapping on this option displays a pop-up window in which you can choose the appropriate “Parity”. 6.25.7.2 Port Replicator Port B (COM6) For details about these parameters, refer to the descriptions under the heading “Port Replicator Port A (COM5)” beginning on page 211. 212 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 6: Settings Total Recall 6.25.7.3 Port Replicator Port B (COM7) For details about these parameters, refer to the descriptions under the heading “Port Replicator Port A (COM5)” beginning on page 211. 6.26 Total Recall Total Recall is a Psion Teklogix utility developed to back up/restore applications and settings.
Chapter 6: Settings Creating A Backup Profile • Tap on Start>Settings. Tap on the Total Recall icon. In the dropdown menu, you can choose: Create Backup Profile, Restore Selected Profile, View Selected Profile Data, and Delete Selected Profile. Keep in mind that until a profile is created, only one option is available–Create Backup Profile. 6.26.1 Creating A Backup Profile • Tap on the Next button to begin the process.
Chapter 6: Settings Creating A Backup Profile • • • Next, choose the type of profile you want to create: - For this device only–creates a backup that is manually restored by the operator. - AutoRestore for this device only–creates a profile that automatically restores itself following a clean start.
Chapter 6: Settings Creating A Backup Profile View Selections Depending on what you have selected for inclusion in your profile, you can view a list of all files, selected files, databases, and/or the registry. • If you’re satisfied with the items in the profile, tap on Next. Performing The Backup • Tap on Backup to begin the process and create a profile. When the backup is finished, a dialog box is presented stating that the backup has been completed successfully.
Chapter 6: Settings Restoring A Profile 6.26.2 Restoring A Profile To manually restore a profile: • Choose Restore Selected Profile from the dropdown menu, and choose the Profile Name you want to restore. • In the next screen, tap on Restore to restore your profile. 6.27 Connections Tab This tab is used to setup connections using Bluetooth, 802.11 radios, and you can also set up Wireless WAN connections. • Tap on Start>Settings>Connections tab to display your connection options.
Chapter 6: Settings Beam Navigation Bar Connectivity Hotkeys Some of the connectivity icons in the Navigation Bar along the top of the screen are hotkeys that offer shortcuts to connection setups. Tapping on a hotkey displays a bubble that provides information about your connections and provides a shortcut to the Wireless Manager applet where you can set up your connections.
Chapter 6: Settings Bluetooth Setup 6.29 Bluetooth Setup Bluetooth is a short-range wireless technology (approximately 10 meters) that enables data communication between digital devices and is intended for Personal Area Networks (PAN). It also provides the capability to use a Bluetooth-enabled cellular phone as a data modem, exchanging information with other Bluetooth devices and providing network access. 6.29.1 Bluetooth Mode • Tap Start>Settings.
Chapter 6: Settings Scanning For A New Device 6.29.2 Scanning For A New Device • Tap on the Devices tab. To add a new device: • Tap on Add new device.... The WORKABOUT PRO scans for a Bluetooth device within a 10 meter range. Any Bluetooth devices within range appear in the Bluetooth list box • 220 Highlight the device you want to add. WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 6: Settings Bluetooth COM Ports • • • Note: Type your Passcode. Tap on Next. In the Display Name screen, edit the name of the device. This is optional. Tap on Finish. To connect to a Bluetooth-equipped device that’s already been added, tap on the item in Bluetooth list box. 6.29.3 Bluetooth COM Ports Incoming Port The Bluetooth COM Ports dialog box allows you to assign a COM port number. If a port number has not been assigned, tapping on New Incoming Port allows you to choose a COM port number.
Chapter 6: Settings Active Connections List Manager” on page 126), a message appears indicating that the COM port you’ve chosen cannot be created. Choose another COM number. Outgoing Port When you connect the WORKABOUT PRO to another device, New Outgoing Port is listed in this dialog box. Tapping on this option allows you to assign an outgoing COM port number. Follow the directions described in “Incoming Port” on page 221 to choose a COM port. 6.29.
Chapter 6: Settings About Tab 6.29.5 About Tab The About tab displays information about the Bluetooth module, such as the manufacturer name, local address and version. Like the Active tab, this information cannot be edited. 6.29.6 The Bluetooth GPRS Phone Once you’ve completed the Bluetooth settings, you can go ahead and set up communication through your Bluetooth-equipped phone. 1.
Chapter 6: Settings The Bluetooth GPRS Phone 3. Tap on the Connections icon. Tap on Add a new modem connection. 4. Type a name for the connection. 5. Tap on the Select a modem dropdown menu, and choose Bluetooth. Tap on Next. 6. Make certain that the phone is discoverable. Some phones also need to be pairable in order to accept a bonding request. Refer to your phone documentation for additional information. 7. If the phone appears in the My Connections list, skip to step 13. 8.
Chapter 6: Settings Connections – Connecting To The Internet 6.30 Connections – Connecting To The Internet To activate a connection, make certain that any necessary equipment is installed in your hand-held such as a radio. You’ll need the following information from your ISP to make an internet connection: ISP server phone number, user name and password. 1. Tap Start>Settings, and then tap on the Connections tab. 2. Tap on the Connections icon. 3. Under My ISP, tap on Add a new modem connection. 4.
Chapter 6: Settings Modem Connection Setup 6.30.1 Modem Connection Setup Before you begin, you’ll need the following information from your ISP or network administrator: telephone number, user name, password, domain name and TCP/IP settings. If your WORKABOUT PRO does not have access to a mobile phone network, insert a modem card in the unit. 1. Tap Start>Settings. Tap on the Connections tab followed by the Connections icon. 2.
Chapter 6: Settings Modem Connection Setup 5. Tap on the Next button. 6. In the next screen, enter the phone number exactly as you want it dialed. If, for example, you need to dial 9 for an outside line, enter 9 at the beginning of the phone number. 7. Tap on the Next button. 8. Type the User Name, Password and Domain Name as provided by your ISP or network administrator. Note: Generally, you will not need to change any of the Advanced settings.
Chapter 6: Settings Modem Connection Setup Changes to Advanced settings are only required in the following instances: To change the baud rate settings, dialing string commands or credit card options. To change port settings. To enter TCP/IP settings because the server to which you are connecting does not dynamically assign addresses. 9. Tap on the Finish button. If you need to edit the Advanced settings, refer to “Advanced Modem Settings” in the next section. 6.30.1.
Chapter 6: Settings Modem Connection Setup Extra Dial-String Modem Commands • Type your credit card number in this field. Cancel If Not Connected In • Tap in the checkbox next to this option to enable this option to make certain that the WORKABOUT PRO does not stay online too long while waiting to connect with a network. Enter the number of seconds after which the call will be cancelled. Note: By default, you WORKABOUT PRO cancels the call if a connection is not made after two minutes.
Chapter 6: Settings Modem Connection Setup Stop Bits This parameter specifies the number of stop bits–1, 1.5, 2–used for asynchronous communication. Flow Control This parameter selects the type of flow control used in your hand-held computer. The WORKABOUT PRO can perform Software or Hardware handshaking, or you can choose None. Terminal This option is similar to the HyperTerminal program capabilities on your PC.
Chapter 6: Settings Wireless Power Icon Server Settings Tab Important: If your server assigns IP addresses dynamically, you will not need to change these settings. Servers requiring assigned IP addresses may also need a way to map computer names to IP addresses. The WORKABOUT PRO supports a variety of name resolution options: DNS, Alt DNS, WINS and Alt WINS. Your ISP or network administrator can determine which name resolution you need, and can also provide the server address.
Chapter 6: Settings Flight Mode – Disabling Wireless Components • Tap on Start>Settings>Connections>Wireless Power icon. 6.31.1 Flight Mode – Disabling Wireless Components To disable all wireless components when, for example, you are taking your handheld onto a plane where wireless connections need to be shut down: • Tap on the Disable All button. To enable wireless components: • Tap on Enable All.
Chapter 6: Settings Network Adaptors 6.31.3 Network Adaptors Important: For RA2041 (Summit) CF card adaptor setup details, refer to “Setting Up A RA2041 Radio–Summit Client Utility” on page 73. When the network card is inserted in your unit for the first time, the Network Settings screen is displayed automatically so that you can configure the card. If it does not appear, or if you want to change settings: • Tap on Start>Settings. Tap on the Connections tab and then on the Wireless Power icon.
Chapter 6: Settings Changing Network Card Settings Note: • • Because most networks use DHCP, you should not need to change these settings unless instructed to do so by your network administrator. If necessary, use a network cable to connect the network card to your network. Refer to your the documentation shipped with your network card for details. To activate the connection, launch the desired program (e.g., Internet Explorer). The WORKABOUT PRO will connect automatically. 6.31.
Chapter 6: Settings Managing An Existing Connection • Choose the type of authentication in this screen. If you choose A pre-shared key, type the key provided by your network administrator. Tap on Next. Type your user name, password and domain name. If a domain name was not provided to you, try the connection without entering a domain name. • • Note: • • Normally, you will not need to change any advanced settings.
Chapter 6: Settings Managing An Existing Connection • • Note: To launch a connection from this screen, press and hold the stylus on the connection you want to activate. Choose Connect from the pop-up menu. To delete a connection, press and hold the stylus on the connection you want to delete. Choose Delete from the pop-up menu. You can also create a new connection by tapping on the New button. To make changes to the settings for this connection, tap on Edit. 6.31.6.
Chapter 6: Settings Selecting A Network 6.31.7 Selecting A Network Important: Normally, you will not need to change these settings. Contact your ISP or network administrator before making any changes. Private networks are used for work-related activities. Internet networks are used for home connection to your ISP. The My Work Network settings are used for private network connections (corporate networks), while My ISP settings are used for Internet network connections.
Chapter 6: Settings Proxy Server Setup 6.31.8 Proxy Server Setup Note: If you are connected to your ISP or private network during synchronization, the WORKABOUT PRO will download the appropriate settings during synchronization from your PC. If these settings are not on your PC, or if they need to be changed, you’ll need to set up the proxy server connection manually.
Chapter 6: Settings Wireless Statistics 6.31.8.1 Changing Advanced Proxy Server Settings • To change advanced settings such as the port number or proxy server type, tap on the Advanced button. • Tap on the proxy type you want to change. For the appropriate server type, type the proxy server name and port. Tap on OK. • 6.
Chapter 6: Settings Establishing A Connection The letter in the signal strength icon (G for GSM/GPRS, U for UMTS and X for CDMA/1xRTT) indicates that a packet data service is available and initialized. Keep in mind that the signal strength icon is displayed without a letter if packet data service is not available or if it is available but not yet initialized. User interaction is required (e.g. the user is required to enter a PIN). A non-recoverable (fatal) error has occurred.
Chapter 6: Settings Disconnecting From A Network • Tap on Start>Settings. Tap on the System tab followed by the Wireless WAN icon. Note: If you are prompted to enter a PIN, refer to “Entering A PIN” on page 242 for details. The Status field indicates when the unit is ready to connect–the Connect Data button is enabled. • Tap on the Connect Data button. The progress of the connection is tracked in the Status field.
Chapter 6: Settings Advanced Information When the WORKABOUT PRO network connection is severed, the Status field displays Ready to Connect. A unit equipped with a GSM/GPRS expansion board displays the signal strength in the main Wireless WAN screen, even while a connection is active. Units equipped with certain other modems (e.g. Sierra Wireless UMTS and CDMA modems, Novatel UMTS modems) do not display the signal strength while a connection is active.
Chapter 6: Settings Advanced Information Once the correct PIN or PUK is entered or if none was required, the modem is instructed to perform a GSM network registration followed by a GPRS attach. The main Wireless WAN dialog box reflects the progress of the initialization.
Chapter 6: Settings Tools Menu • • • The SIM card is missing. After the SIM has been inserted a reset may be required. SIM failure The SIM card is permanently disabled (e.g. because the wrong PUK has been entered too many times). A new SIM is needed. Modem failure The modem did not respond to commands as expected. If a reset does not clear this condition, the modem may need to be replaced. NDIS error An internal software error has occurred.
Chapter 6: Settings Tools Menu To activate the automatic connection mode: • Tap on the OK button. While automatic connection mode is enabled, the Connect Data button in the main Wireless LAN dialog box changes to Disable Auto. To close the currently active connection (if any) and disable the automatic connection mode: • Tap on Disable Auto. Important: Automatic connection mode should not be used if applications other than the Wireless WAN user interface (e.g.
Chapter 6: Settings Tools Menu • A customer has subscribed for a static IP address. By definition this must be configured manually. Important: For CDMA/1xRTT, automatic configuration is not available – connections must be configured manually. Under APN, the packet service access number must be entered (typically “#777”). In the following section, all the parameters that need to be configured for a connection (such as APN, user name, password, DNS server addresses etc.) are referred to as a profile.
Chapter 6: Settings Tools Menu Delete The selected profile is deleted. You cannot delete the Default profile. Activate When this button is chosen, the selected profile is made the active profile. Activation is possible only if the Enable automatic configuration: checkbox is unchecked. New Tapping on the New button allows you to create a new profile. The name of the newly created profile must be different from all existing profiles. Also, the name cannot be Default.
Chapter 6: Settings Tools Menu Advanced IP The Advanced IP button in the Show Profile and Edit Profile dialog boxes opens another dialog box that allows you to configure a static IP address as well as the IP addresses for the primary and secondary DNS and WINS resolvers. 6.33.5.2 Security Configuration The Security Configuration dialog box is called up through the Tools menu. Note: Security configuration is not available with CDMA modems.
Chapter 6: Settings Tools Menu If unauthorized access to the device is a concern, the Require PIN on resume checkbox should be checked. In this case, you will be prompted whenever a PIN is required and the PIN is not stored. 6.33.5.3 Network Configuration Note: Network configuration is not available with CDMA modems. In the main Wireless WAN screen: • Tap on the Tools menu, and choose Network.
Chapter 6: Settings Tools Menu 6.33.5.4 Driver Mode Configuration By default, the Wireless WAN driver is enabled (the Enable driver checkbox is checked). The driver must be disabled in order to access the modem directly (e.g. dial-up data, fax, or in order to manually submit AT commands to the modem for development, testing, approvals, etc.). In most cases, the Virtual WWAN serial port can be used and it is not necessary to disable the WWAN driver.
Chapter 6: Settings Tools Menu 6.33.5.5 Modem Information The fields in this dialog box cannot be edited – they only display information about the WORKABOUT PRO modem. If the network operator has not programmed a user’s phone number into the SIM, the Phone field remains empty. The modem serial number is called IMEI for GSM modems and ESN for CDMA modems. The SIM ID is sometimes referred to as the ICC ID (International Charge Card Identifier). Not all modems support the retrieval of the SIM ID.
Chapter 6: Settings SMS Menu • • • • • • Enabled – Always On When the WORKABOUT PRO enters suspend mode, the modem remains powered indefinitely. Enabled – Keep on for 5 min Enabled – Keep on for 15 min Enabled – Keep on for 30 min Enabled – Keep on for 1 hour Enabled – Keep on for 2 hours When the hand-held enters suspend mode, the modem remains powered.
Chapter 6: Settings SMS Menu 6.33.6.1 New SMS Tapping on New opens a dialog box for sending a new SMS message. The recipient's phone number (to be entered in the To field) can consist of the digits 0 through 9, as well as the * and # characters, optionally preceded by one + character, indicating an international number (i.e. the country code follows immediately after the + character). By checking the Store message in Outbox field, a new message can be stored in the Outbox before being sent.
Chapter 6: Settings SMS Menu is sorted with the most recently received message first. The list can be sorted by any other column by clicking on the corresponding column heading. Clicking the same column heading twice reverses the sort order. Pressing any letter or digit moves the highlight to the next message whose address begins with that letter or number. Note: The date and time formats can be changed through the Regional Settings in the Control Panel.
Chapter 6: Settings SMS Menu 6.33.6.4 SMS Configuration Tapping on SMS Configuration opens the SMS configuration dialog. The SMS Centre Address follows the same rules as the recipient's phone number in the New message dialog.
7 PROGRAMS 7.1 Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259 7.2 ActiveSync® . . . . . . . . . . . . . . . . . . . . . 7.2.1 Synchronization Wizard . . . . . . . . . . . . 7.2.2 ActiveSync Options . . . . . . . . . . . . . . 7.2.3 Scheduling Synchronization . . . . . . . . . . 7.2.4 Connecting To The Internet With ActiveSync. 7.3 Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 7: Programs 258 7.11.3 Deleting A Photo . . . . . . . . . . . 7.11.4 Editing A Photo . . . . . . . . . . . . 7.11.5 Creating A Slide Show . . . . . . . . 7.12 Pocket MSN . . . . . . . . . . . . . . . . . 7.12.1 Setting Up Your MSN Account . . . . 7.12.2 First-Time Startup . . . . . . . . . . . 7.12.3 Getting Started. . . . . . . . . . . . . 7.12.4 Adding Contacts. . . . . . . . . . . . 7.12.5 Blocking And Unblocking A Contact. 7.12.6 Changing Your Contact Status . . . . 7.
Chapter 7: Programs Games The Programs menu provides access to all the applications available on your WORKABOUT PRO. • Tap on Start>Programs to display this screen. Tapping on an icon in this screen launches the associated applet. Figure 7.1 Programs Tabs 7.1 Games Your WORKABOUT PRO is equipped with a few standard games–Bubble Breaker and Solitaire–should you feel the need to pass the time. 7.
Chapter 7: Programs Synchronization Wizard 7.2.1 Synchronization Wizard If your corporation has a Microsoft Exchange Server with Exchange Server ActiveSync installed, you can use the Synchronization Wizard to synchronize your WORKABOUT PRO with the server. When you connect the WORKABOUT PRO to your PC, a screen is displayed to help you synchronize your device.
Chapter 7: Programs ActiveSync Options 7.2.2 ActiveSync Options • In the ActiveSync program on your PC, tap on Tools>Options to display the Sync Options tab. • Tap in the checkboxes to choose the types of information you want ActiveSync to synchronize. 7.2.3 Scheduling Synchronization To choose when your data will be synchronized: • Tap on the Schedule tab in the Options dialog box. WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 7: Programs Connecting To The Internet With ActiveSync • Tap on the drop-down menu next to Peak times to determine how often ActiveSync will synchronize during the busiest e-mail traffic times and next to Off peak times for slower e-mail times. 7.2.4 Connecting To The Internet With ActiveSync If your PC is connected to the Internet and your WORKABOUT PRO is connected to your PC with ActiveSync, then your WORKABOUT PRO is connected to the Internet.
Chapter 7: Programs Download Agent 7.6 Download Agent This option is not supported on the WORKABOUT PRO. 7.7 Excel Mobile Excel Mobile is an abridged version of Microsoft Excel, an electronic spreadsheet program. If you’re familiar the Excel application on your PC, you’ll be able to navigate Excel Mobile.
Chapter 7: Programs Workbook Components 7.7.1 Workbook Components Columns Address of selected text Entry bar Cell Rows Status bar Toolbar Menu bar • Selected cell Formula drop-down menu Sheet1 drop-down menu If the toolbar is not visible, tap on the View>Toolbar. By default, a new workbook has three worksheets in it. Each worksheet has 256 columns and 16,384 rows. 7.7.
Chapter 7: Programs Entering Data In A Worksheet • Tap Rename to assign a new name, Insert to add a new worksheet, Delete to remove the worksheet, and Move Up or Move Down to change the order of the worksheets. 7.7.3 Entering Data In A Worksheet • • Tap on the cell in which you want to type text or numbers. A border appears around the cell. Begin typing text or numbers. As you type, a blinking cursor is displayed in the entry bar at the top of the screen.
Chapter 7: Programs Working With Cells, Rows and Columns Entering Symbols To enter symbols like hatch symbol (#) or to change the character set: • Tap on Menu>Insert>Symbol. • In the Insert Symbol dialog box, choose the font you would prefer to use. • In the Subset drop-down menu, choose the character set you’d like to use. 7.7.4 Working With Cells, Rows and Columns Excel offers a number of formatting and editing tools to help you create a professional and accurate spreadsheet.
Chapter 7: Programs Working With Cells, Rows and Columns Inserting Rows And Columns To insert a cell, row or column: • Tap a cell in the workbook next to which you want to insert a cell, row or column. • Tap Menu>Insert>Cells, or Tap and hold the stylus on a cell. In the pop-up menu, choose Insert Cells. The Insert Cells screen appears.
Chapter 7: Programs Creating Formulas 7.7.5 Creating Formulas A formula is an equation beginning with an = sign that performs operations on your data. The operations can be mathematical and can use numbers, text or cell addresses. You can enter formulas manually, or you can use the Insert function command that lists a collection of standard formulas. Inserting Formulas Manually In this example, the total expense will appear in the selected cell, next to ‘Total’.
Chapter 7: Programs Creating Formulas In the example above, the objective is to add the expenses together, placing the total in the cell next to Total. • Tap the stylus in cell B1–the cell containing the value, 100–the value B1 appears in the entry bar. • Since in this example, we want to add values together, tap the stylus on the plus sign ‘+’ in the soft keyboard–tap the [CAPS] key in the soft keyboard to display this symbol. • Tap the stylus in cell B2–the cell containing the value, 200.
Chapter 7: Programs Creating Formulas • Tap on the formula you want to use–for this example, the SUM formula was used–‘SUM(number1,number2,...)’, and tap on OK. Important: The formula is displayed in the entry bar of the worksheet. This formula is a model. The information in the parentheses must be replaced by your data. Figure 7.4 Inserting A Function In this example, in the parentheses, the SUM function sample indicates that numbers (or cell coordinates) be separated by commas.
Chapter 7: Programs File Explorer • • Tap the stylus on the next cell you want included in the formula – remember to separate each entry with a comma. When you’re done, tap on the check mark to the left of the entry bar. The formula is calculated and the total is entered in the cell you selected at the outset. 7.8 File Explorer Windows Mobile 5.0 files are stored in folders and sub-folders that are accessible through File Explorer.
Chapter 7: Programs Creating A Note Notes can also be shared through e-mail and synchronization with your PC. • Tap on Start>Programs>Notes to launch this application. • If a blank Note like the sample screen here is not displayed, tap on New in the softkey bar. 7.10.1 Creating A Note • Choose an entry mode for your note. To enter text with the soft keyboard, Transcriber or the Block or Letter Recognizer, tap the stylus on the arrow to the right on the soft keyboard icon to choose your text input method.
Chapter 7: Programs Converting Handwritten Notes To Text To convert handwriting into text: • Tap on the pen tool and compose a note using your stylus. • Tap on Menu>Tools>Recognize. The text in the note is converted from handwritten to printed text. Note: To convert only a specific portion of your handwritten note into printed type, tap the stylus just before the first letter of the text, pause for a second, and then drag your stylus across the text you want to select.
Chapter 7: Programs Renaming A Note Failed Conversions The Recognize tool sometimes gets the conversion wrong. If some words are not converted properly: • Press and hold the stylus on the incorrectly converted word. • In the pop-up menu, choose Alternative to display a list of possible alternatives to the incorrectly converted word. Your handwritten version is displayed along the top of the menu. Figure 7.5 Incorrect Conversions • • Tap on the correct word in the list.
Chapter 7: Programs Recording Notes • Tap on Menu>View Recording Toolbar. Volume Skip to end Skip to beginning Record Stop Play Progress Indicator • • • • Tap on the Record button–a beep alerts you that your device is now ready to record. Begin speaking into the microphone on the WORKABOUT PRO, or move the hand-held to within a few feet of the source of the sound you want to record. Tap on the Stop button when you’ve completed your recording. Tap on OK to save the note.
Chapter 7: Programs Synchronizing A Note 7.10.5 Synchronizing A Note Like Messaging, Tasks, Contacts and so on, the Notes program can be synchronized with Outlook on your PC. In this way, all notes, recordings and drawings created in the Notes program are copied to your PC and can be edited in Outlook’s Notes module. To synchronize Notes with Outlook: • Connect your WORKABOUT PRO to your PC. • In the ActiveSync screen on your PC, tap on the Tools>Options menu to display the Options tab. Figure 7.
Chapter 7: Programs Moving Photos To The WORKBOUT PRO Important: The Pictures & Videos program can only display .bmp or .jpg formats. Photos in other formats will need to be converted on your PC before they are transferred to the WORKABOUT PRO. 7.11.1 Moving Photos To The WORKBOUT PRO • • Connect your device to your PC with ActiveSync. On your PC, using Windows Explorer (right-click My Computer and click on Explorer), drag photos from their folder to the Mobile Device, My Pictures folder. 7.11.
Chapter 7: Programs Editing A Photo 7.11.4 Editing A Photo • • Tap a thumbnail photo to open it. Tap on Menu>Edit. The Rotate command is now displayed in the softkey bar. Additional editing tools are now listed in the Menu. 7.11.5 Creating A Slide Show To view a slide show: • Tap on the Menu>Play Slide Show. The slide show begins–in slide show mode, photos are displayed for about five seconds, one after the other. • To display the slide show tool bar, tap anywhere on the photo.
Chapter 7: Programs First-Time Startup Note: • • MSN and Hotmail e-mail addresses are valid Passports accounts. Set up a connection on your mobile device such as a modem or wireless connection. Refer to “Connections Tab” beginning on page 217 for details. Set up an MSN Hotmail or Passport account. To set up an MSN account, go to http://www.passport.com. To set up a hotmail account, go to http://www.hotmail.com. Important: You must register and pay a one-time fee in order to activate Pocket MSN.
Chapter 7: Programs Adding Contacts The MSN - Sign In dialog box is displayed. • • • Type your E-mail address–your MSN Passport or Hotmail e-mail account. In the Password field, type your MSN Passport or Hotmail password. Tap on Sign In. 7.12.4 Adding Contacts The people you plan to chat with are known as your contacts in Pocket MSN. Important: These contacts are not to be confused with those identified in the Contacts program.
Chapter 7: Programs Blocking And Unblocking A Contact 7.12.5 Blocking And Unblocking A Contact To block a contact: • In the startup MSN Messenger screen, press and hold the stylus on a contact whose messages you want to block. • Choose Block in the pop-up menu. On the MSN Messenger screen, you’ll see a red slash through the icon next to this contact’s name. Blocked contacts do not know they’ve been blocked. To them, your status will always be ‘not online’.
Chapter 7: Programs Search 7.14 Search • Tap Start>Programs, and then tap on the Search icon. • • In the Search for field, type the item for which you’re looking. To narrow your search, tap on the Type dropdown menu and choose from a list of pre-existing programs. To search through all files, leave this option at All Data. 7.14.
Chapter 7: Programs Messaging–The Inbox To go to a web site: • Connect your WORKABOUT PRO to the Internet. (Refer to “Connecting To The Internet With ActiveSync” on page 262 for details.) • Tap on Start>Programs>Internet Explorer to open Internet Explorer. Internet Explorer is also available from the Today screen. • • Tap on the address bar–the field near the top of the screen where URLs are entered–to highlight the current URL. Type a new URL in the address bar.
Chapter 7: Programs Folders 7.15.1 Folders If you use an Outlook e-mail account, messages in the Inbox folder in Outlook are automatically synchronized with your WORKABOUT PRO. You can use ActiveSync on your PC to synchronize additional folders. The folders and messages you move are mirrored on the server. For POP3 accounts, if you move e-mail messages to a folder you create, the link between the messages on the WORKABOUT PRO and the copies on the mail server are broken.
Chapter 7: Programs Synchronizing E-mail With Outlook • In ActiveSync on your PC, tap on Tools>Options in the tool bar at the top of the screen. • Make certain that a check mark is displayed in the checkbox next to E-mail. Tap on OK. Once you check E-mail for synchronization, Outlook e-mail messages are synchronized as part of the general synchronization process.
Chapter 7: Programs Changing Synchronization Settings 7.15.3 Changing Synchronization Settings 286 • In ActiveSync on your PC, double-tap the E-mail item in the Sync Options tab. • Tap on the Select Folder button. • Add a checkmark next to the folders in this screen that you want to synchronize with your WORKABOUT PRO, and tap on OK. WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 7: Programs Creating a New Account The E-mail Synchronization screen is displayed again. • If you want to accept file attachments, add a check mark next to Include file attachments. To limit the size, tap on Only if smaller than, and specify a size in the KB box. • Tap on OK. 7.15.4 Creating a New Account • • Tap on Programs>Messaging icon. (Messaging may be available directly from your Today screen.
Chapter 7: Programs Moving Around Terminal Services Client • Tap on Start>Programs>Terminal Services Client. • If the Recent Servers list contains any servers to which you have recently connected, tap on the server. To connect to a new server, type the server’s name in the Server field. If you are using applications that have been sized for use with the WORKABOUT PRO, tap the stylus in the checkbox next to Limit size of server desktop to fit on this screen. Tap on the Connect button. • • • 7.17.
Chapter 7: Programs Improving Browser Performance 7.17.4 Improving Browser Performance When you reduce the time taken to refresh a Web page, Internet Explorer performance is improved. • On your PC, in Internet Explorer, choose Tools>Internet Options, and tap on the Advanced tab. • Disable the check mark next to Use smooth scrolling. 7.17.
Chapter 7: Programs Creating A New Document If you’ve already create a Word Mobile document, it will be listed in the Word Mobile window. • Tap on New in the softkey bar to create a new Word document 7.18.1 Creating A New Document The softkeys in the softkey bar provide the tools you’re already familiar with when working with Microsoft Word on your desktop PC.
Chapter 7: Programs Data Entry Modes 7.18.2 Data Entry Modes In addition to the soft keyboard, you can enter text using Block Recognizer, Letter Recognizer or Transcriber. Refer to “Entering Text” on page 66 for details. You can also use the WORKABOUT PRO keyboard for data entry. 7.18.3 Sharing Documents With Your PC Documents created on a PC are recognized by your WORKABOUT PRO. However, some formatting is lost when ActiveSync converts a Word document to a Word Mobile document.
8 EXPANSION MODULES 8.1 Expansion Modules. . . . . . . . . . . . . . . . . . . 8.1.1 Imager And Laser Scanner Expansion Modules. 8.1.2 Compact Flash Radios & Kits . . . . . . . . . . 8.1.3 Wide Area Network Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295 295 295 295 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 8: Expansion Modules Expansion Modules 8.1 Expansion Modules Easily installed expansion modules such as 802.11 radios, internal scanners and imagers available for the WORKABOUT PRO allow you to customise this handheld to meet your specific mobile computing requirements. Each expansion module is shipped with a detailed instruction sheet that steps you through the installation process. For imagers and scanners, these instruction sheets also describe the steps you’ll need to take to enable the device.
PERIPHERAL DEVICES & ACCESSORIES 9 9.1 Carrying Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299 9.1.1 Attaching The Hand Strap . . . . . . . . . . . . . . . . . . . . . . . 299 9.1.2 Attaching The Pistol Grip . . . . . . . . . . . . . . . . . . . . . . . 301 9.1.3 Protective Carrying Case. . . . . . . . . . . . . . . . . . . . . . . . 302 9.1.3.1 Using The Swivel Belt Loop With The Carrying Case . . . . . 302 9.1.4 Soft Shell Holster . . . . . . . . . . . . . . . . . . . . . . .
Chapter 9: Peripheral Devices & Accessories 9.6 Quad Battery Charger–Model #WA3004-G1 . . . . . . . . . . . . . . . . . 313 9.6.1 Charging Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 9.6.2 Battery Charge Duration . . . . . . . . . . . . . . . . . . . . . . . . 314 9.6.3 Charge Indicators–The LEDs. . . . . . . . . . . . . . . . . . . . . . 314 9.6.4 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 9.6.4.1 Excessive Charge Duration . . . . . . . . . . . . .
Chapter 9: Peripheral Devices & Accessories Carrying Accessories 9.1 Carrying Accessories There are a variety of carrying accessories to help the operator work safely and comfortably with the WORKABOUT PRO. Carrying Accessory Model Number Hand Strap WA6025 for WORKABOUT PRO C WA6125 for WORKABOUT PRO S Pistol Grip WA6001-G1 Pistol Grip for SX5393 Imager WA6002-G1 Protective Vinyl Case WA6091 for WORKABOUT PRO C WA6190 for WORKABOUT PRO S Soft Shell Holster WA6050 Table 9.
Chapter 9: Peripheral Devices & Accessories Attaching The Hand Strap 300 • Use a Phillips screwdriver to attach the strap to the two threaded inserts on the back of the WORKABOUT PRO, near the top of the unit • Stretch the hand strap toward the base of the WORKABOUT PRO, and hook the bottom of the strap into the slot near the base of the battery pack. WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 9: Peripheral Devices & Accessories Attaching The Pistol Grip 9.1.2 Attaching The Pistol Grip The pistol grip is attached to the four threaded inserts on the back of the WORKABOUT PRO. Four Phillips head screws are provided with this accessory. Note: • Prior to installation, make sure the trigger mechanism is securely snapped into the pistol grip body and that the trigger operates properly.
Chapter 9: Peripheral Devices & Accessories Protective Carrying Case • Tighten the screws to a torque of 3 lbs-in (3kgf-cm) to secure the pistol grip in place. 9.1.3 Protective Carrying Case A carrying case is available for WORKABOUT PROs to shield the unit from damage. It is equipped with a soft plastic window to protect the unit display and keyboard. A variety of cases are available, depending on the type of end-cap attached to your unit. 9.1.3.
Chapter 9: Peripheral Devices & Accessories Protective Carrying Case • Slide your belt through the belt loop. Figure 9.2 Attaching The Belt Loop Alternatively, you can attach a plastic clip to the swivel belt loop and clip it to your waistband or belt. Belt Clip Figure 9.3 Belt Clip WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 9: Peripheral Devices & Accessories Soft Shell Holster 9.1.4 Soft Shell Holster A soft shell holster with removable belt and swivel holster pad can be used to hang a WORKABOUT PRO with a pistol grip from you waist Soft Shell Holster Swivel Holster Pad and Removable Belt Figure 9.4 Soft Shell Holster • • • 304 Insert the belt in the swivel holster pad. Attach the pad on either the left or right side of the holster case, depending on whether you are left- or right-handed.
Chapter 9: Peripheral Devices & Accessories The Batteries 9.2 The Batteries Note: Review “Specifications” on page 327 for detailed information. The WORKABOUT PRO will operate with a Standard Lithium Ion battery pack, a High-Capacity Lithium Ion battery pack or three AA alkaline batteries. If you are using a Lithium Ion battery pack, it must first be charged. In addition to the main battery, the hand-held is equipped with a rechargable coin battery–a Maxell ML2032. 9.
Chapter 9: Peripheral Devices & Accessories Power Consumption Considerations 9.3.2 Power Consumption Considerations Check to ensure the mains circuit supplying chargers and/or docking stations is adequate for the load, especially if several chargers and docking stations are being powered from the same circuit. • Quad charger–can consume up to 2A @ 120VAC or 1A @ 240VAC. • Quad docking station–can consume up to 3A @ 120VAC or 1.5A @ 240VAC. 9.3.
Chapter 9: Peripheral Devices & Accessories Desktop Docking Station • • • • • The extension cord is properly wired and in good electrical condition and that the wire size is larger than 16 AWG. Do not expose the charger to rain or snow. Do not place batteries in the charger if they are cold from extended exposure to a freezer or outside temperatures below 10°C (50°F). Allow them to warm up to room temperature for at least two hours.
Chapter 9: Peripheral Devices & Accessories Charging A Battery Installed In The WORKABOUT PRO The desktop docking station is designed to charge the battery installed in the WORKABOUT PRO along with a spare battery pack. Spare Battery Charge Well DC IN Socket Figure 9.6 Back Of Desktop Docking Station Important: This docking station can only be used to charge Psion Teklogix approved Lithium-Ion batteries–specifically model numbers WA3000-G1 and WA3006. 9.4.
Chapter 9: Peripheral Devices & Accessories Battery Charge Duration 9.4.3 Battery Charge Duration A fully discharged battery can take up to 5 hours to charge. The desktop docking station stops applying power to the battery when it is fully charged–there is no risk of overcharge if the battery remains in the charge well. 9.4.4 Charger LED Indicators Figure 9.
Chapter 9: Peripheral Devices & Accessories Desktop Docking Station Ports 9.4.6 Desktop Docking Station Ports Host USB Port Client USB Port DC IN Socket Figure 9.8 Back of Desktop Docking Station The desktop docking station is equipped with two USB ports–a Host USB port to connect peripherals such as a printer, keyboard, etc. and a Client USB to connect the docking station to a PC. 9.4.
Chapter 9: Peripheral Devices & Accessories Linking A WORKABOUT PRO To An Ethernet Network • Back up WORKABOUT PRO files to the PC, then restore them from the PC to the hand-held again, if needed, and so on. You can use the Getting Started CD included with your WORKABOUT PRO to install ActiveSync. 9.4.8 Linking A WORKABOUT PRO To An Ethernet Network An USB-Ethernet adaptor cable – model number WA4010-G1 – is used to connect the WORKABOUT PRO to an Ethernet network through a desktop docking station.
Chapter 9: Peripheral Devices & Accessories Troubleshooting The Docking Station Operations 9.4.9 Troubleshooting The Docking Station Operations The indicators, applications and drivers required to use and monitor the desktop docking station as a dock (as opposed to a charger) are installed on the WORKABOUT PRO–no applications are present on the docking station itself. 9.5 Single Battery Charger–Model #WA3001-G1 Figure 9.
Chapter 9: Peripheral Devices & Accessories Charge Indicators–The LED 9.5.3 Charge Indicators–The LED The LED on the top of the charger indicates battery charge progress. LED Behaviour Charge Status Off Solid green Fast flashing green Slow flashing green No battery detected in the charge well. Battery is fully charged. Battery is charged to 75% of capacity. Charge in progress. Battery is outside ambient temperature range of 0° C to 45 °C (32° F to 113° F).
Chapter 9: Peripheral Devices & Accessories Charging Batteries 9.6.1 Charging Batteries • Slide the battery into a charge well, aligning the contacts on the battery with the contacts in the charge well. 9.6.2 Battery Charge Duration A fully discharged battery can take up to 4 hours to charge. The quad battery charger stops applying power to the battery when it is fully charged–there is no risk of overcharge if the battery remains in the charge well.
Chapter 9: Peripheral Devices & Accessories Troubleshooting 9.6.4.3 • • • • Power LED Does Not Light Up Remove all batteries, and unplug the charger. Connect another device to the mains outlet to ensure there is power. Remove the IEC mains power cable from the charger, and check it for damage. Reconnect the mains cable in the charger and mains outlet. If the power LED still does not light up: • Unplug the mains cable, and check the fuse at the rear of the charger.
Chapter 9: Peripheral Devices & Accessories Quad Docking Station–Model #WA4004-G1 9.7 Quad Docking Station–Model #WA4004-G1 Figure 9.11 Quad Docking Station Note: The quad docking station is shipped with a docking manual. It is critical that this manual be reviewed for additional information and updates. The quad docking station permits each of four docked WORKABOUT PROs to communicate with a 10/100 BaseT Ethernet network at greater than 2Mbps.
Chapter 9: Peripheral Devices & Accessories Quad Indicators A user application must be loaded onto each WORKABOUT PRO that utilizes the quad dock for communication. When the network is connected and this application is loaded, the quad dock is ready for use. 9.7.2 Quad Indicators The quad dock is equipped with a power indicator LED and RJ45 link and traffic indicator LEDs. When a valid network link is established, a green LED is illuminated next to the RJ45 connector. 9.7.
Chapter 9: Peripheral Devices & Accessories Battery Charging–LED Behaviour 9.7.5 Battery Charging–LED Behaviour The quad docking station supplies DC power to enable the WORKABOUT PRO internal fast charger. Charge status is displayed on the hand-held LED–the LED turns red while the battery is being charged and turns green once the charge is complete. If the battery is fully charged when the unit is inserted in the docking station, the LED flashes red for less than a second and then turns green.
Chapter 9: Peripheral Devices & Accessories AC Wall Adaptor And Tether Cable 9.8 AC Wall Adaptor And Tether Cable Adaptor Plugs DC Power Plug 3-Point Tether Connector Tether Cable Tether Port Universal AC Power Supply DC IN Socket Figure 9.12 WORKABOUT PRO AC Wall Adaptor And Tether Cable Audio Jack Low Insertion Force Port (LIF) Tether Port Figure 9.
Chapter 9: Peripheral Devices & Accessories AC Wall Adaptor And Tether Cable • Choose the adaptor plug that is suitable for use in your country. Slide the adaptor plug into the Universal AC power supply, snapping it into place. These two pieces, coupled, are referred to as an AC adaptor. Figure 9.14 Inserting The Adaptor Plug • 320 Plug the pronged end of the lead into an AC outlet. WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
Chapter 9: Peripheral Devices & Accessories Automotive Power Adaptor 9.9 Automotive Power Adaptor Fuse Automotive Power Adaptor Tether Connector Tether Cable DC Power Plug Tether Port DC IN Socket Figure 9.15 Automotive Adaptor The automotive power adaptor, model number WA3112-G1, is an optional accessory that allows you to power your WORKABOUT PRO through your vehicle cigarette lighter. • Attach a tether cable to the base of the WORKABOUT PRO.
Chapter 9: Peripheral Devices & Accessories Vehicle Cradle Mounting Recommendations Depending on the type of hand-held unit you are use, you can choose from the following powered vehicle cradle models: • Vehicle Cradle for WORKABOUT PRO C – WA1010-G1 • Vehicle Cradle for WORKABOUT PRO S – WA1110-G1 A port replicator option is available for powered vehicle cradles. Refer to “The Port Replicator” on page 325 for details. 9.10.
Chapter 9: Peripheral Devices & Accessories Wiring Guidelines 9.10.2 Wiring Guidelines Before installing cables between the cradle and other devices, review the following: • Ensure that drilling holes will not damage the vehicle or its wiring. • Protect cable runs from pinching, overheating and physical damage. • Use grommets to protect cables that pass through metal.
Chapter 9: Peripheral Devices & Accessories Powered Vehicle Cradle Installation must also be installed out of the vehicle operator’s reach. Exposing an accessible power connector to water or other liquids could create a hazardous situation resulting in serious injury or death. Installation of powered cradles in vehicles that operate above 60VDC require special consideration.
Chapter 9: Peripheral Devices & Accessories The Port Replicator 9.10.6.1 Wiring Vehicle Power To The Cradle A 1.8 meter (6 foot) extension power cable (PN 13985) is supplied with your powered vehicle cradle. This cable should be wired to a filtered, fused (maximum 10A) accessory supply on the vehicle. The power cradle draws no more than 8A (less if the accessory supply is greater than 12V). Any additional wiring, connectors or disconnects used should be rated for at least 10A.
Chapter 9: Peripheral Devices & Accessories Bluetooth Peripherals The functionality of the WORKABOUT PRO tether port is replicated into RS-232 serial interfaces by the port replicator. It provides the user with 3 DB9 serial interfaces as well as one Type B USB port (for connecting a Host device). 9.
SPECIFICATIONS 10 10.1 Hand-Held Computer Specifications . . . . . . . . . . . . . . . . . . . . 329 10.2 Radio Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 331 10.3 Scanner Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 10.3.1 SE 1223HP, LR, ALR And SE 955HP Specifications . . . . . . . . 332 10.3.1.1 SE 1223HP Decode Zone . . . . . . . . . . . . . . . . . . . 333 10.3.1.2 SE 1223LR Decode Zone . . . . . . . . . . . . . . . . . . . 333 10.3.1.
Chapter 10: Specifications Hand-Held Computer Specifications Note: Performance specifications are nominal and subject to change without notice. 10.1 Hand-Held Computer Specifications WORKABOUT PRO C Models Size • • • Length: 8.7" (221mm) Width: 3" (76mm) at grip area tapering to 3.6" (92mm) at display area. Depth: 1.2" (31mm) at grip area tapering to 1.7" (44mm) at display area. Weight With battery: 16 oz. (454g); add 2.6 oz. (75g) with SE 1223HP scanner expansion module; add 0.7 oz. (19g) with 802.
Chapter 10: Specifications Hand-Held Computer Specifications Power Management • • • • • • • 3.7V Standard Capacity Li-ion rechargeable battery - up to 8 hours of operation. 3.7V High-Capacity Li-ion rechargeable battery - up to 12 hours of operation. Advanced Smart Battery w/ gas gauge. Quick swap battery packs. Built-in fast charger. Rechargeable, user-replacable internal coin battery. Also accepts 3 AA Alkaline batteries.
Chapter 10: Specifications Radio Specifications 10.2 Radio Specifications 802.11g Direct Sequence Spread Spectrum (Model Number RA2040) Form Factor Antenna Port Transmit Power Frequency Range Channels RX Sensitivity Data Rates Compact Flash Single U.FL jack, no diversity 20mW 2.400 - 2.4835GHz, all versions 1 - 11 for USA, Canada 1- 13 for EU countries (8% FER, 1024 bytes packet) = -89dBm @ 1Mbps, -87dBm @ 11Mbps, -83dBm @ 6Mbps, -72dBm @ 54Mbps 6, 9, 12, 18, 24, 36, 48 & 54Mbps 802.
Chapter 10: Specifications Scanner Specifications RX Sensitivity (BER<=0.1%) Data Rate -80dBm max 732.2kbps and 57.6kbps asymmetric, 433.9kbps symmetric 10.3 Scanner Specifications 10.3.
Chapter 10: Specifications SE 1223HP, LR, ALR And SE 955HP Specifications 10.3.1.1 SE 1223HP Decode Zone 4,844 Lux to 86,112 Lux Mil Size Minimum range Inches 5 2.75 Inches Maximum range Inches 1.25 7 3 Width of field Width of field Inches 7.5 2.25 1 11 4 10 1.75 0.5 15.75 6 UPC 2 1 22 9 15 2 1 25 10 20 2 1 30 12.5 40 3.75 56 23 55 5 66 25 10.3.1.
Chapter 10: Specifications EV15 Imager Specifications 10.3.1.3 SE 1223ALR Decode Zone 4,844 Lux to 86,112 Lux Minimum range Inches Inches Maximum range Inches 19 2 39 15 20 2 50 6 30 33 4 98 11 Mil Size UPC 55 Width of field Width of field Inches 4 27 2 115 12 70 reflective 114 12 250 28 100 reflective 125 14 360 41 High quality symbols in normal room light. 10.3.1.4 SE 955HP Decode Zone Decode Zone Typical 4 mil 1.0 in. - 5.5 in. / 2.54 cm - 13.97 cm 5 mil 1.25 in.
Chapter 10: Specifications HHP5180 Imager Parameter EV15 Reading Distance Up to 90cm (35 in) UPC (E&A), EAN, RSS, Code 39, Code 128, UCC/EAN 128, ISBN, ISBT, Interleaved, Matrix, Industrial and Standard 2 of 5, Codabar, Code 93/93i, Code 11, MSI, Plessey, Telepen, PDF417, Micro PDF417 Works in any lighting conditions, from 0 to 100,000 lux 2000G, 0.7ms, half sinus, 3 axes 50G r.m.s Symbologies Ambient Light Shock Vibration 10.3.2.
Chapter 10: Specifications HHP5180 Imager Parameter HHP5180 2D: PDF417, MicroPDF417, MaxiCode, Data Matrix, QR Code, Aztec, Aztec Mesa, Code 49, UCC Composite Symbologies supported Linear: Code 39, Code 128, Codabar, UPC, EAN, Interleaved 2 of 5, RSS, Code 93, Codablock Postal: Postnet (US), Planet Code, BPO 4 State, Canadian Post, Japanese Post, KIX (Netherlands) Post Size Weight Operational Input Voltage: Current Draw: Operating Temperature Storage Temperature Humidity Shock OCR Fonts: OCR-A, OCR-B
Chapter 10: Specifications SX5393 Imager Performance 6.6 mil PDF417 (.017 cm) 7.5 mil Linear (.019 cm) 8.3 mil Data Matrix (.021 cm) 8.3 mil QR (.021 cm)6 10 mil Linear (.025 cm) 13 mil UPC (.033 cm) Near 2.8 in. (7.1cm) 2.5 in. (6.4cm) 3.4 in. (8.6cm) 3.4 in. (8.6cm)) 2.2 in. (5.6cm) 2.0 in. (5.1cm) Far 6 in. (15.2cm) 6.5 in. (16.5cm) 5.7 in. (14.5cm) 5.4 in. (13.7cm) 7.6 in. (19.3cm) 8.9 in. (22.6cm) SF Working Range* *Data characterized at 23°C and 0 lux ambient light. 10.3.
Chapter 10: Specifications Battery Test Specifications 10.3.4.1 SX5393 Imager Decode Zone x Lux to 100,000 Lux Mil Size* Minimum range Inches Maximum range Inches 10 4.6 5.7 15 3.8 9.2 4 9.7 20.8 2.6 11.7 Minimum range Inches Maximum range Inches 15** *QR code **Data Matrix Code 39 Mil Size 7.5 4.1 8.4 10 3.1 10.9 15 4 9.7 10.4 Battery Test Specifications 10.4.1 Standard Capacity–2000 mAh (Model WA3000-G1) 10.4.1.
Chapter 10: Specifications Standard Capacity–2000 mAh (Model WA3000-G1) Description Specification Discharge Current 0.5C (-20°C to 60°C) Internal Resistance Remark Typical 150 m Maximum Battery Pack Electrical Specifications Description Specification Minimum Typical Maximum Over voltage detection voltage 4.325V 4.350V 4.375V Charge enable 4.10V 4.15V 4.20V Under voltage detection voltage 2.5V 2.6V 2.7V Over current detection current 2.97A 3.17A 3.
Chapter 10: Specifications Standard Capacity–2000 mAh (Model WA3000-G1) Description Condition Standard Charge/Discharge cycle After repeating standard charge and fast discharge, measured the fast discharge time after 300 discharge cycles. 90 minutes or more Capacity_2 After standard charge, measured the time taken for a standard discharge. 500 minutes or more Over discharge After standard charge, apply a standard discharge followed by a standby discharge.
Chapter 10: Specifications High Capacity–3000 mAh (Model WA3006) Description Test Reference Test Condition/Result IEC68-2-14 Test +60°C (2C) for 1 hr. (T1), -20°C (2C) for 1 hr. 3 mins. maximum allows for change between T1 and T2, 10 cycles. No explosion, fire, vent or leakage. Vibration resistance BS2011 Part 2.1 FDC (IEC68-2-37) After standard charge, tested under the following conditions: Random vibration 5Hz-500Hz ASD 0.02g2/Hz in 3 axis for 15 mins.
Chapter 10: Specifications High Capacity–3000 mAh (Model WA3006) Battery Pack Electrical Specifications Description Specification Minimum Typical Maximum Over voltage detection voltage 4.325V 4.350V 4.375V Charge enable 4.10V 4.15V 4.20V Under voltage detection voltage 2.5V 2.6V 2.7V Over current detection current - 3.5A - Short-circuit detection current 5.0A 8.0A 11.0A Short-circuit detection voltage 150mV 200mV 250mV Over voltage delay time 0.8s 1s 1.
Chapter 10: Specifications High Capacity–3000 mAh (Model WA3006) Description Condition Standard Capacity_2 After standard charge, measured the time taken for a standard discharge. 500 minutes or more Over discharge After standard charge, apply a standard discharge followed by a standby discharge. Then measured capacity after carrying out standard charge and then a fast discharge. 110 minutes or more Self discharge After a standard charge, keep battery at 25°C for 30 days.
Chapter 10: Specifications Maxell ML2032 Rechargeable Coin Battery Description Test Reference Test Condition/Result IEC68-2-14 Test +60°C (2C) for 1 hr. (T1), -20°C (2C) for 1 hr. 3 mins. maximum allows for change between T1 and T2, 10 cycles. No explosion, fire, vent or leakage. Vibration resistance BS2011 Part 2.1 FDC (IEC68-2-37) After standard charge, tested under the following conditions: Random vibration 5Hz-500Hz ASD 0.02g2/Hz in 3 axis for 15 mins.
APPENDIX A SUPPORT SERVICES AND WORLDWIDE OFFICES Psion Teklogix provides a complete range of product support services to its customers worldwide. These services include technical support and product repairs. A.1 Technical Support For technical support in North America: Call Toll free: +1 800 387 8898 Option 3 or Direct Dial: +1 905 813 9900 Ext. 1999 Option 3 For technical support in EMEA (Europe, Middle East and Africa), please contact the local office listed in the website below: http://www.
Appendix A: Support Services And Worldwide Offices Worldwide Offices A.3 Worldwide Offices COMPANY HEADQUARTERS Psion Teklogix Inc. 2100 Meadowvale Boulevard Mississauga Ontario Canada L5N 7J9 Tel: +1 905 813 9900 Fax: +1 905 812 6300 Email: salescdn@psion.com CANADIAN SERVICE CENTRE Psion Teklogix Inc. 7170 West Credit Ave., Unit #1 Mississauga, Ontario Canada L5N 7J9 Tel: +1 800 387 8898 Option 2 - or Direct: + 1 905 813 9900 Ext. 1999 Option 2 Fax: + 1 905 812 6304 Web: www.psionteklogix.
APPENDIX B PORT PINOUTS B.1 Standard Battery Contact Pin Definition Signal Name PIN # Function 1 P- Power Pin for Battery Pack Negative 2 DQ Maxim DS2762 Data 3 TH (GND) 4 P+ Power Pin for Battery Pack Positive 5 PS Power Switch Sensor - Plastic Rip 6 P- Ground Power Pin for Battery Pack Negative B.
Appendix B: Port Pinouts Positive Female Battery Connector (2000mAh & 3000mAh) B.2.1 Positive Female Battery Connector (2000mAh & 3000mAh) B.
Appendix B: Port Pinouts Tether Port Pinout B.
Appendix B: Port Pinouts Audio Mini-Plug B.5 Audio Mini-Plug Ring 1 Terminal 3 Ring 2 Terminal 1 Sleeve Terminal 6 Tip Terminal 2 B-4 WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.
INDEX A About, Bluetooth 223 About Device icon 122 About icon (software version) 121 Accepted Start Char 182 accessories belt loop (carrying case) 302 carrying case 302 cigarette lighter adaptor 321 desktop docking station 307 Ethernet adaptor cable 311 hand strap 299 holster, soft shell 304 pistol grip 301 port replicator 325 quad battery charger 313 quad docking station 316 single battery charger 312 swivel belt loop (carrying case) 302 tether cable & wall adaptor 319 vehicle cradle 321 wall adaptor & te
Index Codabar 154, 166, 188, 201 Code 11 168, 190 Code 128 149, 199 Code 39 199 Code 93 153, 166, 187, 201 Discrete 2 of 5 156, 170, 192 EAN 13 149, 162, 184, 200 EAN 8 150, 163, 185, 200 IATA 2 of 5 169 Interleaved 2 of 5 155, 168, 190, 202 Matrix 2 of 5 169, 191 MSI Plessey 154, 167, 189 UPC A 150, 164, 185, 201 UPC E 151, 164, 186, 201 Translation tab 207 Barcodes Must Decode 196 batteries a description of 305 backup (ML2032) 16 Battery Details tab 136 battery hotkey 49 Battery info.
Index Check Digit Verification 147, 182, 184, 189, 190, 191, 192 Check Digit Verification (Codabar) 188 Check Digit Verification (I 2 of 5) 156 cigarette lighter adaptor 321 cleaning hand-held 42 clean start 20 Click Data (scanner double-click) 206 Click Time (scanner double-click) 206 clock, setting 49, 125 CLSI Editing 154 CLSI Library System 188 Codabar 154, 166, 188, 201 Codabar 154 Codablock 175, 195 coded 142 Code 11 168, 190 Code 128 199 Code 128 149, 161, 183 Code 128 Emulation 158, 194 Code 16K 174
Index display backlight, adjusting 36 docking station uploading data using 40 docking stations 305 desktop docking station 307 installation at site 305 operator controls 306 quad dock 316 Dot Time 142, 196 double-click appending characters to a decoded bar code 206 scanner trigger 206 Double-Click, Manage Triggers menu 130 Download Agent 263 Duration 142 E EAN 13 149, 162, 184, 200 EAN 8 150, 163, 185, 200 EAN-8 Zero Extend 150 ECI Decoder 146 email notification 51 Enable Bookland (UPC-EAN) 152 Enable CC-
Index Input Methods 112 Block Recognizer 69, 113 Input Method tab 112 Keyboard Options 113 Letter Recognizer 70, 113 soft keyboard 67 Transcriber 67 Transcriber options 114 input modes handwriting 291 typing 291 Insert Function Command 269 Intensity tab (backlight) 123 Interleaved 2 of 5 155, 168, 190, 202 Internet connection 225 Internet Explorer 282 browsing web sites 282 ISBN Conversion 163, 185 ISBT Concat Any Pair 184 ISBT Concatenation 162 ISBT Concat Transmit 183 ISBT 128 149, 183 K keyboard one sh
Index Minimum Cancel Time 143, 160, 180 Minimum Length 161, 162, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, 182, 184, 188, 189, 190, 192, 193 mini-plug, audio pinout B-4 Min Scan Duration 197 Mode, Bluetooth 219 modem setup 226 advanced settings 228 Baud Rate 228 Cancel If Not Connected 229 Dial-String Commands 229 Server Settings 231 TCP_IP Settings 230 Wait For Credit Card 228 Wait For Dial Tone 228 modifier keys 31 locking & unlocking 32 One Shot Mode 104 shift-state indicator
Index Pocket Word 289 port pinouts B-1 port replicator 325 Port Replicator Port A 211 Port Replicator Port B 212, 213 Ports Baud 211 Data Bits 211 Parity 212 ports Data Bits 229 Flow Control (modem setup) 230 LIF (Low Insertion Force) B-2 Parity (modem setup) 229 Stop Bits (modem setup) 230 Terminal (modem setup) 230 tether B-3 PosiCode 172 Postal Australian 178 Canadian 178 China 178 Japanese 178 Kix 179 Korean 179 PlaNET 177, 204 PostNET 177, 204 Royal 179, 205 Power 134 Advanced battery settings 135 Batt
Index aiming (target) dot duration 142 appending characters 150, 206 Bad Scan Beep 207 bar code settings 141 check digit 155, 168 Check Digits (MSI Plessey) 155, 168 Check Digit Verification 147 Check Digit Verification (I 2 of 5) 156 Click Data (appending data) 206 Click Time 206 CLSI Editing 154 Codabar 154 Code 128 149, 161, 183 Code 128 Emulation 158 Code 32 Prefix 146 Code 39 146, 160, 181 Code 93 153 Composite 157 Conv. UPC-E To UPC-A 151 Conv.
Index EAP Credentials 82 EAP Types 80, 81 Global Settings Tab 83 IP, assigning 73 Main Tab 74, 77 security 80 Status Tab 85 ThirdPartyConfig 82 Windows Zero Config (WZC) 82 WLAN, connecting to 73 SD/MMC Card, inserting 41 Search (find) 282 Security Level 153 Server Settings (modem setup) 231 Set Length L1 146 Set Length L2 146 Settings 65, 101 App Launch 101 Buttons 103 Personal Tab 101 App Launch icon 101 Buttons icon 103 One Shot tab 104 Up_Down tab 103 SE 955 scanner specs 332 shift-state indicator (soft
Index backup profile, restoring 217 touch pen, using 47 touchscreen calibrating 37 stylus, using 47 touch pen, using 47 touchscreen, aligning (calibrating) 37 Transcriber Inking 114 quick settings 114 Transcriber (Input Methods tab) 114 Transcriber, using 67 Translations parameters (bar codes) 207 Transmit Check Digit 182, 185, 186, 188, 189, 190, 191, 192 Transmit Check Digit (I 2 of 5) 156 Transmit Check Digit (MSI Plessey) 155 Transmit Code 1D Char 145 Transmit Number System 164, 165, 185, 186 trigger ma