Product Manual

WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual XV
Approvals And Safety Summary
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada. En cas d’utilisation du module radio 802.11,
afin d'éviter toute interférence radio avec le service autorisé, l'appareil doit être
utilisé à l'intérieur, tout en tant éloigné de toute fenêtre afin de garantir le maximum
de protection. Si cet équipement (ou son antenne émettrice) est installé à l'extérieur,
il est alors soumis à licence.
Warning for Australia
The user needs to switch off the device when exposed to areas with potentially
explosive atmospheres such as petrol stations, chemical storage depots and blasting
operations.
Warning to Users
This product is a Class I/Class II laser product according to CDRH 21 CFR 1040.10
and 1040.11 and Class1/Class 2 laser product according to IEC 60825-
1:1993+A1:1997+A2:2001
The SE1200 ALR has a maximum radiated power less than 1.4 mW; according to
EN 60825-1: 2001 it is classified as a Class 3B laser product.
LASER/LED WARNINGS
For your own safety, it is critical that you comply with the following warnings:
CAUTION
The laser/LED aperture is located in the front of terminal. Do not look into the
laser/LED beam or point the beam at people or animals.
CAUTION
Using controls or adjustments, or performing procedures other than those speci-
fied herein may result in hazardous radiation exposure.
CAUTION
The use of optical instruments with this product will increase eye hazard.
This product may contain a laser scanner that emits less than 1.4mW maximum
radiant power at a wavelength of 650nm or 680nm.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
Operating Psion Teklogix equipment where explosive gas is present may result in
an explosion.