User manual

12 Psion Teklogix NETBOOK PRO Win CE Quick Start Guide
• Push the card into the card slot until it clicks. The
eject button next to the card slot pops out.
• To remove a card, press the eject button next to the
slot inwards. The card pops loose, and may be pulled
outwards.
Store your CF card safely.
Figure 2.9 CF Card Slot Location
2.2.4 PC Cards
PC Cards, which fit into a dedicated slot in the NETBOOK
PRO, can be non-volatile memory cards (used to store appli-
cation software and/or data). PC Cards can also be communi-
cations or interface cards.
The PC Card slot is located on the right side of the NET-
BOOK PRO.
Inserting And Removing A PC Card
• Push the card into the card slot until it clicks. The
eject button next to the card slot pops out.
• To remove a card, press the eject button next to the
slot inwards. The card pops loose, and may be pulled
outwards.
Store your PC Card safely.
Figure 2.10 PC Card Slot Location
2.3 Turning The NETBOOK PRO On And Off
To switch on :
open the NETBOOK PRO, then press and hold the Esc/
On key for 2 seconds.
Note: If the serial cable is connected to the PC and the
NETBOOK PRO, the NETBOOK PRO will automati-
Eject Button
CF Slot
PC Card Slot
Eject Button