User manual

Psion Teklogix NETBOOK PRO Quick Start Guide 13
2.15.3 Operating And Storage Temperatures
Operating:
0°C to +50°C (32°F to 120°F). The power adaptor must
be used in the temperature range: 0°C to +40°C (+32°F
to +104°F).
Storage:
-10°C to +60°C (14°F to 140°F). To prolong the life of
the NETBOOK PRO (and the battery pack) store
between +10°C and +35°C (+50°F and +95°F).
Important: Avoid exposing the NETBOOK PRO to
extreme changes in temperature and humidity,
since such exposure may result in damage.
Charging the NETBOOK PRO battery should
be limited to the temperature range: 0°C to
+40°C (32°F to 104°F).
2.16 How To Reset The NETBOOK PRO
Periodically your NETBOOK PRO may need to be reset if
the following occurs:
• You cannot exit a program normally.
• The operating system stops responding.
• You are unable to power on using the Power button.
NETBOOK PRO is equipped with a reset switch that allows
you to restart the operating system and preserve saved data.
To perform a soft reset:
Note: Ensure that, if possible, all files and applications
are closed.
Insert a short wire, such as an unfolded paper clip, into the
hole to the right of the right Shift key. Press down to press the
NETBOOK PRO’s Reset switch. Then restart the computer
by pressing the Esc/On key. It is also possible to perform a
soft reset by holding down the Ctrl, Alt, and Delete keys for
three seconds. The computer will restart automatically.
Figure 2.12 Location Of Soft Reset Switch
To perform a hard reset:
Note: When performing a hard reset ensure that the backup
batteries are removed first and replaced last in order
to prevent discharging them unnecessarily.
Remove all batteries and AC power. Once the main battery or
AC power is applied, the NETBOOK PRO will reboot.
Note: Hard resetting the NETBOOK PRO may delete the
ActiveSync partnership on the NETBOOK PRO. If
that occurs, you may delete and re-create the partner-
ship on the PC, or create another partnership with a
new name. Refer to ActiveSync’s online help for more
detail on this operation.
Reset Switch