User manual

Chapter 2: Getting Started
Power Properties
20
Psion Teklogix NETBOOK PRO Win CE 4.2 User Manual
activity not executed by the user. Stand-By is activated when the time specified in
the Switch to Stand-By and the Switch to Stand-By options have elapsed without
any activity. The NETBOOK PRO then begins to monitor the Suspend time.
Figure 2.6 Power Schemes: Switch To Standby Menu
Press any button to bring the unit out of Standby state.
Switch to Suspend
Once the time specified in the Switch to Dim and the Switch to Stand-By states have
elapsed, the NETBOOK PRO begins to count down the time specified in the Switch
to Suspend option. When the time in the Suspend option elapses, the unit enters
Suspend state.
In Suspend state, the NETBOOK PRO CPU suspends all activity, turns off the dis-
play, and goes into a low power state. The state of the device (RAM contents) is pre-
served.
Select Suspend from the Start Menu or press the Fn and Esc keys together to put
the NETBOOK PRO into Suspend state. The NETBOOK PRO may be configured
to allow entry into Suspend state if external communications connections are active;
these options can be set in the Advanced tab of the Power Properties dialog.
Press the Esc/On key to wake up the unit. You can also enable the unit to wake from
Suspend when a number of external events occur, by checking the appropriate
option box in the Advanced tab of the Power Properties dialog.
Note: When the NETBOOK PRO is in suspend state, any network connection is
broken. To resume, you must re-establish the network connection.