Printer Operator's Manual

Specifications

Media Specifications

Receipt Paper

General Specifications: 0.0022 to 0.0065” (0.056 to 0.089mm) Thick

2.9 to 4.125” (73.66 to 104.78mm)Wide

1.75” (44.45mm) Maximum Outside Diameter

0.750” (19.05mm) Core Diameter Recommended

Black Mark Sensing On Printed Side

Approved Vendors: Kansaki: P300, P310, P350, P354, P390*, P530UV, TO281CA,

OP200, TO381N, F180, F380, F550

Jujo: TF-50KS-E2C

Honshu: FH65BV-3

Appleton: Resiste 900-3.0*

*Standard Psion Teklogix Offering

Black Mark Position

For automatic ticket printing, the black mark should be positioned as shown in the figure below. When using

Mark Sensing mode, PrintAbout printers will automatically position the output for tear-off and printing

following a Form Feed command or by pressing the Paper Feed button.

For non-automatic paper positioning, refer to the MLP Series & PrintAbout Programmer’s Manual for sensing

and positioning commands.

0.15”

Black Mark should span width

of paper for best results.

Perforation or tear position

Figure 17 - Black Mark Position