8515 Vehicle-Mount Computer User Manual May 4, 2007 ISO 9001 Certified Quality Management System Part No. 8000132.
© Copyright 2007 by Psion Teklogix Inc., Mississauga, Ontario This document and the information it contains is the property of Psion Teklogix Inc., is issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except for the sole purpose of promoting the sale of Psion Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or in any manner detrimental to the interests of Psion Teklogix Inc.
Return-To-Factory Warranty Psion Teklogix Inc. provides a return to factory warranty on this product for a period of twelve (12) months in accordance with the Statement of Limited Warranty and Limitation of Liability provided at www.psionteklogix.com/warranty. (If you are not already a member of Teknet and you attempt to view this warranty, you will be asked to register. As a member of Teknet, you will have access to helpful information about your Psion Teklogix products at no charge to you.
Restriction On Hazardous Substances (RoHS) Directive 2002/95/EC What is RoHS? The European Union has mandated that high environmental standards be met in the design and manufacture of electronic and electrical products sold in Europe, to reduce hazardous substances from entering the environment. The “Restriction on Hazardous Substances Directive (RoHS)” prescribes the maximum trace levels of lead, cadmium, mercury, hexavalent chromium, and flame retardants PBB and PBDE that may be contained in a product.
TABLE OF CONTENTS Approvals And Safety Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix CE Marking . . . . . . . . . . . . . R&TTE Directive 1999/5/EC . . . FCC Information To Users . . . . . Emissions Information For Canada. Warnings To Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 2.9.3 2.9.4 2.9.5 2.9.2.2 EAP Credentials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 2.9.2.3 ThirdPartyConfig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Global Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 3.12.3 Cleaning The 8515 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Chapter 4: Windows Embedded CE 5.0 4.1 Navigating In Windows Embedded CE 5.0 And Applications . . . . . . . . . . . . . . . . . . . . . . . 47 4.1.1 Navigating Using A Touchscreen And Stylus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 4.1.2 Navigating Using The Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 5.6.5 5.6.6 5.6.7 5.6.4.1 Recording And Saving A Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 5.6.4.2 Executing A Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 5.6.4.3 Deleting A Macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Unicode Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 5.13.3 Partition Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 5.13.3.1 Dismounting A Partition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 5.13.3.2 Deleting A Partition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 5.13.3.3 Formatting A Partition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Chapter 6: Peripheral Devices & Accessories 6.1 External Bar Code Readers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 6.1.1 Entering Data With The Bar Code Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 6.2 6.3 Bluetooth Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Appendix B: Port Pinouts B.1 B.2 B.3 Serial Port Interface Pinout (DB-9 male) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-1 Enhanced USB1 Port Interface Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-2 Enhanced USB2 Port Interface Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-2 Appendix C: USB Setup Application C.1 USB Setup. .
APPROVALS AND SAFETY SUMMARY CE Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi R&TTE Directive 1999/5/EC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi FCC Information To Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii Emissions Information For Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv Warnings To Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
x Psion Teklogix 8515 Vehicle-Mount Computer User Manual
Chapter : Approvals And Safety Summary CE Marking When used in a residential, commercial or light industrial environment the product and its approved UK and European peripherals fulfil all requirements for CE marking. R&TTE Directive 1999/5/EC This equipment complies with the essential requirements of EU Directive 1999/5/EC (Declaration available: www.psionteklogix.com). Cet équipement est conforme aux principales caractéristiques définies dans la Directive européenne RTTE 1999/5/CE.
Chapter : Approvals And Safety Summary Tämä laite vastaa EU:n radio- ja telepäätelaitedirektiivin (EU R&TTE Directive 1999/5/EC) vaatimuksia. (Julkilausuma nähtävillä osoitteessa: www.psionteklogix.com). Psion Teklogix tímto prohlašuje, že 8515 Vehicle-Mount Computer je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1995/5/ES (NV č. 426/2000 Sb.) a Prohlášení o shodě je k dispozici na www.psionteklogix.com.
Chapter : Approvals And Safety Summary This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
Chapter : Approvals And Safety Summary Emissions Information For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. When using the 802.11 radio option, to prevent radio interference, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
Chapter : Approvals And Safety Summary • • • Make sure the cord is positioned so that it is not stepped on, tripped over or otherwise subjected to damage or stress. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in fire or electric shock. To reduce risk of electric shock, unplug the vehicle-mount computer from the DC source before attempting any maintenance or cleaning.
INTRODUCTION 1 1.1 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.3 About The 8515 Vehicle-Mount Computer . . . . . . . . . . . . . . . . . . . . . . .
2 Psion Teklogix 8515 Vehicle-Mount Computer User Manual
Chapter 1: Introduction About This Manual 1.1 About This Manual This manual describes how to configure, operate and maintain the Psion Teklogix 8515 Vehicle-Mount Computer. Chapter 1: “Introduction” provides a basic overview of the 8515 Vehicle-Mount Computer. Chapter 2: “Basic Checkout” describes the steps required to get the 8515 ready for operation.
Chapter 1: Introduction Text Conventions 1.2 Text Conventions Note: Notes highlight additional helpful information. Important: These statements provide important instructions or additional information that is critical to the operation of the computer or other equipment. Warning: These statements provide important information that may prevent injury, damage to the equipment, or loss of data. 1.
2 BASIC CHECKOUT 2.1 Preparing The 8515 For Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.2 8515 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.3 Important Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.4 Switching The 8515 On And Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.5 Calibrating The Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.
6 Psion Teklogix 8515 Vehicle-Mount Computer User Manual
Chapter 2: Basic Checkout Preparing The 8515 For Operation 2.1 Preparing The 8515 For Operation Typically the 8515 Vehicle-Mount Computer is configured at the factory and arrives ready for use. Although the 8515 is equipped with an internal Compact Flash slot and a Micro-SD I/O slot, these slots are not intended for user modification. If a device needs to be changed or added in these slots, contact qualified Psion Teklogix personnel.
Chapter 2: Basic Checkout Important Operating Instructions 2.3 Important Operating Instructions Warning: IT IS CRITICAL that this information be reviewed and that any guidelines applicable to your vehicle-mount be strictly followed. Backup Battery The vehicle-mount backup battery provides one hour of memory backup. The capacity is reduced as the operating temperature cools. The table below provides a general outline of battery capacity based on the operating temperature.
Chapter 2: Basic Checkout Calibrating The Touchscreen Important: If the word ‘BLUE’ is displayed in uppercase in the taskbar at the bottom of the screen, this key is locked ‘on’—the 8515 will not switch off. Press the [BLUE] key again to unlock it; then press [BLUE] [ENTER/ON] to switch the 8515 off. If, however, you’ve disabled the “Blue Key” in the ‘One Shot’ dialog box (see “One Shots” on page 74), the 8515 can be turned off even when the [BLUE] key is locked ‘on’. 2.
Chapter 2: Basic Checkout Setting Up The Model RA2040 802.11g Radio Figure 2.1 Network And Dial-Up Connections Note: You can press [CTRL] [ESC] to display the Start Menu. 2. Choose the radio icon to open the Wireless LAN Settings window—in the sample screen below, this is labelled PTXCF838. Figure 2.2 Wireless Settings Window 3. Wireless Statistics Tab This tab lists your radio statistics. When you choose the Wireless LAN icon, a Wireless Statistics window is displayed.
Chapter 2: Basic Checkout Setting Up The Model RA2040 802.11g Radio Figure 2.3 Wireless Statistics Choosing the Zero button resets the statistics of the last four items—Packets IN, Packets OUT, IN errors and OUT errors. Tap the stylus on the Wireless Information tab. 4. Wireless Information Tab This tab displays existing networks to which you can connect, and it allows you to add a new network or modify the settings for an existing network. Figure 2.
Chapter 2: Basic Checkout Setting Up The Model RA2040 802.11g Radio default, the 8515 attempts to connect to preferred networks. This behaviour can be changed by enabling ‘Automatically connect to non-preferred networks’ in the Advanced dialog box (page 16). To add a new configuration, double-tap on the Add New item listed with the networks. A blank Wireless Properties dialog box is displayed. 5. Wireless Properties Figure 2.
Chapter 2: Basic Checkout Setting Up The Model RA2040 802.11g Radio Note: WEP cannot be disabled if you are using WPA or WPA-PSK authentication. TKIP (Temporal Key Integrity Protocol) is an encryption protocol included as part of the IEEE 802.11 standard for wireless LANs. Designed to enhance WEP, TKIP uses the original WEP programming but ‘wraps’ additional code at the beginning and end to encapsulate and modify it, encrypting each data packet with a unique encryption key. Authentication 802.
Chapter 2: Basic Checkout Setting Up The Model RA2040 802.11g Radio To assign a Network key, tap in the checkbox next to ‘The key is provided automatically’ to remove the check mark next to this option. Figure 2.6 Accessing Network Key And Key Index Tap in this checkbox to remove the checkmark. This disables this option, providing access to the Network Key & Key Index fields. Key Index This field is used to identify the WEP key. Enter a value from 1 to 4. Enable 802.1X authentication “802.
Chapter 2: Basic Checkout Assigning An IP Address The connection you created will be listed in the Wireless Information tab as a preferred network. The radio will search for the SSID and will compare the WEP and authentication information you specified. If there is a match between your 8515 settings and the access point settings, the 8515 will communicate on the network through the access point. 2.7.
Chapter 2: Basic Checkout Name Servers Tab • 2.7.2 Tap on each field, and type an IP, Subnet Mask and Default Gateway address. Tap on OK to save your information. Name Servers Tab Note: • • If DHCP is enabled, name server addresses are assigned automatically. In the IP Information tab, tap on the Configure button. (Figure 2.7 is the window from which you choose the Configure button.) Tap on the Name Servers tab. Figure 2.
Chapter 2: Basic Checkout Setting Up The Model RA2041 Radio SCU Figure 2.10 Advanced Wireless Settings 2.7.3.1 Rearranging Preferred Networks The 8515 attempts to connect with the networks listed in this dialog box in sequence, beginning at the top of the list. If you need to rearrange this list of networks—move networks up and down in the list: • • 2.7.3.2 In the networks list, tap on the network that you want to move up or down in the list.
Chapter 2: Basic Checkout Assigning The IP Address Note: 2.8.1 You do not need to reset your 8515 after configuring the Summit DC 802.11 SC (Model RA2041) CF radio. Assigning The IP Address Before launching the SCU, you need to configure how the IP address will be obtained. • Tap on Start>Settings>Network and Dial-up Connections. Follow the steps under the heading “Assigning An IP Address” on page 15 to determine how the IP address will be obtained—either via DHCP or by specifying an address. 2.8.
Chapter 2: Basic Checkout Using The SCU To Connect To The WLAN • • Tap on the New button to define a new config (profile). Type a name for your configuration using any alpha-numeric combination to uniquely identify this config. • Tap on OK to return to the Config tab. • Tap on Commit to save the config name. • When a pop-up message indicates that your configuration will be saved, tap on OK.
Chapter 2: Basic Checkout SCU Tabs When you tap on the config you created, the Summit DC-802.11 SC CF radio module (Model RA2041) attempts to connect to the network using these steps: - Associate to the SSID. - Authenticate to the network. - If EAP authentication is being used, derive dynamic encryption keys. - If DHCP is being used by the network, obtain an IP address. If the Summit DC-802.11 SC CF (Model RA2041) is not connecting: • Tap on the Status tab.
Chapter 2: Basic Checkout Config Tab • Active Config: Lists the name(s) of the active configuration profile(s) which are referred to as configs. When a config is chosen from the Active Config dropdown menu, the settings for that config become active. - If ThirdPartyConfig is selected, after the vehicle-mount goes through a power cycle, WZC is used for configuration of the radio. See “ThirdPartyConfig” on page 25 for details. • Association Status: Indicates if the radio is associated to an access point.
Chapter 2: Basic Checkout Config Tab • Radio Attributes: Lists radio attributes. These attributes can be individually chosen from this menu. When an attribute is chosen, an associated list of options is displayed where you can assign new settings or view existing settings. The following table describes the options in the Radio Attributes dropdown menu: Table 2.2 Radio Attributes Menu Radio Attribute 22 Description Value Default Config Name of config (configuration profile).
Chapter 2: Basic Checkout Config Tab Table 2.2 Radio Attributes Menu Radio Attribute Description Value EAP Type Extensible Authentication Protocol type used for 802.1X authentication to access point. None, LEAP, EAP-FAST, PEAP-MSCHAP – To use EAP-TLS, you must use WZC. Credentials Authentication credentials for the selected EAP type. None User: Username or Domain/Username (up to 64 characters). Password: up to 64 characters. For PEAP: CA Cert–CA server certificate filename.
Chapter 2: Basic Checkout Config Tab • 802.1X authentication using pre-shared keys or an EAP type, required for WPA2 and WPA. • Data encryption and decryption using WPA2 AES, WPA TKIP or WEP. Common EAP types include: • • EAP-TLS: Uses the same technology as a follow-on to Secure Socket Layer (SSL). It provides strong security, but relies on client certificates for user authentication. PEAP: Provides secure user authentication by using a TLS tunnel to encrypt EAP traffic.
Chapter 2: Basic Checkout Global Settings Tab 2.9.2.2 EAP Credentials Keep the following in mind when defining security settings: • • • If the credentials specified in the config are incorrect and that config is used, the authentication fails without an error message; you will not be prompted to enter correct credentials. If the credentials are not specified in the config, when the radio tries to associate using that config, you will be prompted to enter the credentials.
Chapter 2: Basic Checkout Global Settings Tab Figure 2.15 SCU Global Settings Menu The Global Settings outlined in the table below can be edited in the SCU: Table 2.3 Global Settings Menu Global Setting 26 Description Value Default CCX features Activates three CCX features: AP-assisted roaming, AP-specified maximum transmit power and radio management. On, Off Off Cert Path Directory where certificates for EAP authentication are stored. Valid directory path up to 64 characters.
Chapter 2: Basic Checkout Global Settings Tab Table 2.3 Global Settings Menu Global Setting Description Value Default Integer from 0 to 30000 5000 Ping Delays ms Amount of time in milliseconds between successive ping requests. Integer from 0 to 7200000 1000 Roam Delta Amount by which second AP’s RSSI must exceed the moving average RSSI for the current AP before the radio will attempt to roam to a second AP.
Chapter 2: Basic Checkout Status Tab Table 2.3 Global Settings Menu Global Setting 2.9.4 Description Value Default TX Diversity Defines how to handle antenna diversity when transmitting data to AP. -Main only: Use main antenna only. -Aux only: Use auxiliary antenna only. -On: Use diversity. On WMM Use Wi-Fi Multimedia Extensions, also know as WMM. On, Off Off Status Tab Figure 2.
Chapter 2: Basic Checkout Resetting The 8515 Vehicle-Mount Computer • • • • 2.10 (Re)Connect: Enables/Disables the radio, applies/reapplies current config and tries to associate and authenticate to the wireless LAN, logging all activity in the output area at bottom of the dialog box. Release/Renew: Obtains a new IP address through DHCP and logs all activity in the output area. Start Ping/Stop Ping: Starts a continuous ping to the address in the text box next to this button.
3 GETTING TO KNOW THE 8515 3.1 Features Of The 8515 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 3.2 The Internal Backup Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 3.3 The Stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 3.4 The Keyboard . . . . . . . . . . . . . . . . . . . . . . 3.4.1 Modifier Keys . . . . . . . . . . . . . . . . . . . 3.4.1.1 Activating Modifier Keys . . . . . . . . 3.4.1.2 Locking Modifier Keys .
3.12.1 Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 3.12.2 Caring For The Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . 44 3.12.3 Cleaning The 8515 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 3: Getting To Know The 8515 Features Of The 8515 3.1 Features Of The 8515 Figure 3.1 Front Of The 8515 Vehicle-Mount Computer Antenna Function Keys Function Keys Beeper Power LED Macro Keys Figure 3.
Chapter 3: Getting To Know The 8515 The Internal Backup Battery 3.2 The Internal Backup Battery The 8515 vehicle-mount is equipped with an internal battery that will provide backup power to the unit for up to 30 seconds of normal operation. The display will be blank during this time. After 30 seconds, the unit will shut off to preserve the contents of RAM. The backup battery provides one hour of memory backup.
Chapter 3: Getting To Know The 8515 The Keys 3.4.1.2 Locking Modifier Keys When a modifier key is pressed twice, it is ‘locked’ on. A ‘locked’ modifier key is displayed in uppercase letters in the taskbar. For example, pressing the [BLUE] key twice locks it on—it is displayed as BLUE KEY in the taskbar at the bottom of the computer screen. The locked modifier key will remain active until it is pressed a third time to unlock or turn it off.
Chapter 3: Getting To Know The 8515 Function Keys And Macro Keys The [BKSP] Key The [BKSP] key (sometimes referred to as destructive backspace) moves the cursor one character to the left, erasing the incorrectly entered key stroke. The [CTRL] And [ALT] Key The [CTRL] and [ALT] keys modify the function of the next key pressed and are application dependent. The [TAB] Key Typically, the [TAB] key moves the cursor to the next field to the right or downward.
Chapter 3: Getting To Know The 8515 Macro Keys Accessing Function Keys [F1] to [F10] Function keys [F1] to [F10] can be directly accessed by pressing the function keys labelled in yellow along the sides of the display. No key combination is required. Function keys [F1] to [F5] are located to the left of the display, [F6] to [F10] on the right. Accessing Function Keys [F11] To [F20] These keys are labelled in orange in the top-left corner of the function keys.
Chapter 3: Getting To Know The 8515 The Keypad Backlight 3.5.3 The Keypad Backlight The intensity of the keypad backlight and the conditions under which this backlight is activated can be configured using the Keyboard icon in the Control Panel. The behaviour of the keypad backlight is tailored in the Keyboard Properties dialog box. Note: 3.6 Refer to “Backlight” on page 73 for details about this option. Keep in mind that this option may be restricted to supervisory use only.
Chapter 3: Getting To Know The 8515 8515 Indicators Figure 3.4 Stylus Properties Menu: Calibration Tab • 3.7 Follow the directions on the calibration screen to calibrate the screen. 8515 Indicators 8515s use onscreen messages and audio tones as indicators. The vehicle-mount is also equipped with a power indicator LED. 3.7.1 Power Indicator LED A power indicator LED is located in the keyboard on the front of the unit.
Chapter 3: Getting To Know The 8515 Onscreen Indicators Windows Start Button You can display the Start Menu by tapping on the Start button in the taskbar. Modifier Key Indicators [SHIFT], [CTRL], [ALT], [BLUE] and [ORANGE] are modifier keys that have onscreen indicators to show when a key is active or locked. If a modifier key is pressed once to activate it, the key is displayed in the taskbar in lowercase characters—for example, pressing the [BLUE] key once displays blue key in the taskbar.
Chapter 3: Getting To Know The 8515 Audio Indicators 3.7.3 Audio Indicators The 8515 beeper provides a variety of sounds and can be configured to emit a sound when a key is pressed, a keyboard character is rejected, scan input is accepted or rejected or an operator’s entry does not match in a match field. Note: 3.8 Refer to “Volume And Sound Properties” on page 81 for details about the Volume & Sound Properties dialog box.
Chapter 3: Getting To Know The 8515 Troubleshooting 3.8.3 Troubleshooting If the scanner is not working, investigate the following: • • • • • • • 3.8.4 Operating One Dimensional (1D) Laser Scanners • • 3.8.5 Is the 8515 on? Check that the scanner settings are correctly configured (see “Scanner Settings” on page 109). Check the bar code to make sure it is not damaged. Try scanning a different bar code to verify that the problem is not with the bar code.
Chapter 3: Getting To Know The 8515 Connecting An 8515 To A Windows 2000 Or XP PC 3.10 Connecting An 8515 To A Windows 2000 Or XP PC ActiveSync®—Microsoft® PC connectivity software— can be used to connect the 8515 to a Windows 2000 or XP PC (desktop or laptop) running this software. By connecting the 8515 to a computer with a cable and running ActiveSync on the PC you will be able to: • • View 8515 files from Windows Explorer.
Chapter 3: Getting To Know The 8515 Caring For The Touchscreen 3.12.2 Caring For The Touchscreen The top of the touchscreen is a thin, flexible polyester plastic sheet with a conductive coating on the inside. The polyester can be permanently damaged by harsh chemicals and is susceptible to abrasions and scratches. Using sharp objects on the touchscreen can scratch or cut the plastic, or crack the internal conductive coating.
4 WINDOWS EMBEDDED CE 5.0 4.1 Navigating In Windows Embedded CE 5.0 And Applications 4.1.1 Navigating Using A Touchscreen And Stylus . . . . . 4.1.2 Navigating Using The Keyboard . . . . . . . . . . . . 4.2 Working With Files, Folders And Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 47 47 48 4.3 The Startup Desktop . . . . . . . . . . . 4.3.1 The Desktop Icons. . . . . . . . . 4.3.2 The Taskbar . . . . . . . . .
46 Psion Teklogix 8515 Vehicle-Mount Computer User Manual
Chapter 4: Windows Embedded CE 5.0 Navigating In Windows Embedded CE 5.0 And Applications 4.1 Navigating In Windows Embedded CE 5.0 And Applications Note: In order to access many of the menus discussed in this chapter, the security level must be set to “Supervisor” (see “Security Level” on page 52). Graphic user interfaces like Windows Embedded CE 5.0 for portable devices and desktop Windows operating systems (Windows 2000, Windows XP, Windows Vista™, etc.) utilize ‘point and click’ navigation.
Chapter 4: Windows Embedded CE 5.0 Working With Files, Folders And Programs been fully configured and your application is launched at startup, you’ll have little need for keyboard navigation. Table 4.
Chapter 4: Windows Embedded CE 5.0 The Startup Desktop • Double-tap on the appropriate icon—either a folder icon, an application icon or a file icon—to open or launch your selection. If you’re using the keyboard: • • 4.3 Use the arrow keys to highlight the icon you want to open or launch. Press [ENTER]. The Startup Desktop When the 8515 boots up, the startup desktop (shell) is displayed. Any applications stored in the Startup folder start up immediately.
Chapter 4: Windows Embedded CE 5.0 The Desktop Icons 4.3.1 The Desktop Icons The icons displayed in the startup desktop operate in much the same way as those displayed on any standard PC desktop that is running Windows. My Device Choosing this icon displays the contents of your 8515 computer. If you’re not sure how to work with the files, folders and programs displayed, refer to “Working With Files, Folders And Programs” on page 48.
Chapter 4: Windows Embedded CE 5.0 The Taskbar The taskbar also displays active modifier keys—[SHIFT], [ALT], [CTRL], [BLUE] and [ORANGE]. Keys that have been locked “on” are displayed in uppercase letters. For example, if you press the [CTRL] key twice to lock it “on”, it is displayed as CTRL KEY in the taskbar. 4.3.2.1 Using The Taskbar A taskbar icon allows you to display a tooltip—a short description of the status of the icon, or to display the Control Panel dialog box associated with the icon.
Chapter 4: Windows Embedded CE 5.0 The Start Menu • Tap the stylus on the items you want to activate or deactivate. A check mark indicates active items. Note: 4.4 The Advanced tab allows you to tap on a Clear button to delete the contents of the Documents folder. The Start Menu Note: Some of the Start Menu items may be disabled based on the current 8515 security settings. The Start Menu lists the operations you can access and work with.
Chapter 4: Windows Embedded CE 5.0 Security Level Figure 4.6 Security Level Menu Assigning The Supervisor Security Level The security level is represented by an icon in the shape of a lock in the taskbar. The security levels define the options accessible to the operator in the Start Menu and the taskbar. By default, the security level is set to User, restricting access to only the most basic Start Menu items. To allow access to all the Start Menu and taskbar options: • • • 4.4.2.
Chapter 4: Windows Embedded CE 5.0 Programs Figure 4.7 Security Settings Note: 4.4.3 It is recommended that you enable ‘Allow Teklogix Security Level’ so that authorized Psion Teklogix service personnel can access your unit should it require maintenance. Programs • Tap on Programs to display a sub-menu of options. Figure 4.8 Programs List This sub-menu allows you to choose ActiveSync, Demo and Command Prompt, and you can access Internet Explorer, along with installed applications (e.g.
Chapter 4: Windows Embedded CE 5.0 Shortcuts Summit The Summit folder provides access to the SCU (Summit Client Utility). The SCU is the utility you will need to configure the Summit 802.11g Compact Flash radio module, Model RA2041 so that it can communicate through a wireless LAN effectively and securely. Command Prompt Command Prompt is used to access the DOS command prompt. At the prompt, you can type DOS commands such as dir to display all the directories in the drive.
Chapter 4: Windows Embedded CE 5.0 Shortcuts The System Tray If your touchscreen is not enabled, you can use the System Tray option to access the icons in the taskbar at the bottom of the screen. The taskbar displays indicators such as a radio signal icon and the security level. Highlighting a taskbar icon allows you to display a tooltip—a short description of the status of the icon, or to display the Control Panel dialog box associated with the icon. • Choose System Tray from the Shortcuts Start Menu.
Chapter 4: Windows Embedded CE 5.0 Settings 4.4.5 Settings • Tap on Settings to display a sub-menu of options. Figure 4.11 Settings List Control Panel The Control Panel contains applets used to configure hardware, the operating system and the shell. If your 8515 is running with the Psion Teklogix Tekterm application or another application, additional configuration applets may appear in the Control Panel.
Chapter 4: Windows Embedded CE 5.0 Shutdown Figure 4.12 Run Dialog 4.4.7 Shutdown Choosing Shutdown displays a sub-menu of options, including Suspend, Warm Reset and Cold Reset. Figure 4.13 Shutdown Menu Note: This menu varies slightly depending on the security level chosen. When the 8515 is set to User level, the Shutdown option is replaced by Suspend. A submenu is not available. At Teklogix security level, an additional option is available in the submenu—Bootloader.
Chapter 4: Windows Embedded CE 5.0 Using A Dialog Box Warm Reset The Warm Reset option resets the 8515, leaving all saved files and (registry) settings intact. Any unsaved data is lost. Cold Reset The Cold Reset option resets the 8515. Any files not stored in permanent memory are lost. However, the registry settings are saved. 4.5 Using A Dialog Box A dialog box (like those in the sample screens in Figure 4.14 on page 59) appears when you need to make selections and enter further information.
Chapter 4: Windows Embedded CE 5.0 Using A Dialog Box Note: If you’re using the touchscreen, use the stylus to tap on an element in a dialog box to select or deselect it, display dropdown menus, save your selections, etc. If you’re using a keyboard, follow the directions below. Dialog boxes contain one or more of the following elements: Tab: A tab separates different elements of a dialog box. Tap on a tab to display the associated information. Textbox: A textbox requires that you type information.
5 CONFIGURATION 5.1 Remote Desktop Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 5.2 Pocket PC Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 5.3 The Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 5.4 Control Panel Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 5.5 Display Properties . . . . . . . . . . . . . . . . . . . 5.5.1 Display Background. . . . . . . . . . . . . . . 5.5.
5.8.2 Suspend. . . . . . . . . . . . . . 5.8.3 Advanced Power Properties . . . 5.8.4 Devices . . . . . . . . . . . . . . 5.9 Stylus Properties . . . . . . . . . . . . 5.9.1 Setting Double-Tap Sensitivity. . 5.9.2 Touchscreen Calibration . . . . . 5.9.3 Disabling The Touchscreen . . . 5.10 Manage Triggers. . . . . . . . . . . . 5.10.1 Trigger Mappings . . . . . . . . 5.10.2 Add And Edit Trigger Mapping 5.11 Certificate Assignment . . . . . . . . 62 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.15 Input Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 5.16 IPv6 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 5.17 Scanner Settings . . . . . . . . . . . . . . . . . . . . . 5.17.1 Decoded Scanners . . . . . . . . . . . . . . . . . 5.17.2 Scanner Settings Options Tab . . . . . . . . . . . 5.17.2.1 Double Click . . . . . . . . . . . . . . . 5.17.2.2 Display . . . . . . . . . . . . . . . . . . 5.17.3 Translations Tab . . . . . .
64 Psion Teklogix 8515 Vehicle-Mount Computer User Manual
Chapter 5: Configuration Remote Desktop Connection 5.1 Remote Desktop Connection Remote Desktop Connection is an 8515 application used to connect to a Windows Terminal Server so that you can run a “session” on the Server machine, using the 8515 (Windows Embedded CE 5.0 device). Refer to the following website for step-by-step information about setting up this connection: http://www.microsoft.com/WindowsXP/pro/using/howto/gomobile/remotedesktop/default.asp 5.
Chapter 5: Configuration Control Panel Icons Figure 5.1 Control Panel 5.4 Control Panel Icons The Control Panel provides a group of icons that allow you to customize and adjust settings on your 8515. App Launch Keys Allows you to map keys to applications, so that you can launch those applications from a single key-press. Bluetooth A short-range wireless technology that enables data communication between devices.
Chapter 5: Configuration Control Panel Icons Certificates A public key is transmitted as part of a certificate. The certificate assigned through this icon is used to ensure that the submitted public key is, in fact, the public key that belongs to the submitter. The client checks that the certificate has been digitally signed by a certification authority that the client explicitly trusts. “Certificate Assignment” on page 90 directs you to the appropriate setup information.
Chapter 5: Configuration Control Panel Icons Network And Dial-up Connections Displays a network window from which the 8515 radio can be configured and an existing configuration can be executed. Refer to “Configuring Your IEEE 802.11 Radio” on page 9 for details. Owner Provides fields in which you can specify owner information. A Notes tab allows additional information to be entered and displayed when the unit is powered up. Network ID tab information is used to access network resources.
Chapter 5: Configuration Control Panel Icons SNMP SNMP (Simple Network Management Protocol) is the protocol used to monitor and manage devices attached to a TCP/IP network. Storage Manager Allows the user to view information about the storage devices that are present, such as the CF card. For details, see page 98. Stylus Adjusts how Windows Embedded CE 5.0 recognizes your double-tap (as slow or rapid successive taps).
Chapter 5: Configuration Display Properties 5.5 Display Properties • In the Control Panel, choose the Display icon. Figure 5.2 Display Icon 5.5.1 Display Background The Background tab allows you to adjust the 8515 display background. • In the Display Properties dialog box, open the Background tab. Figure 5.3 Background Tab This option allows you to change the background colour or add an image. 5.5.2 Display Appearance • 70 In the Display Properties dialog box, open the Appearance tab.
Chapter 5: Configuration Display Backlight Figure 5.4 Appearance Tab This dialog box allows you to customize the display colour scheme and font size. 5.5.3 Display Backlight The backlight is activated for a configurable amount of time when the 8515 is in use (key press, scanner trigger or data received from the host). The Display Properties dialog box in the Control Panel allows you to specify the intensity of the backlight along with how long the display will maintain the specified intensity.
Chapter 5: Configuration Keyboard Properties Intensity This parameter is used to adjust the light intensity of the backlight. Sliding the bar to the left lowers the light intensity, and sliding it to the right raises the intensity. Bright For The value chosen from this dropdown menu determines the duration of time that the backlight stays on at the configured intensity when a unit is not in use.
Chapter 5: Configuration Backlight Figure 5.7 Repeat Tab Enable Character Repeat Tapping in the checkbox next to this option enables the key behaviour you specify in this dialog box. Repeat Delay The position of the slider determines how long a key must be held down before it begins to autorepeat. Repeat Rate The value assigned for the Repeat Rate parameter determines how quickly the key you press repeats and is measured in characters per second (cps).
Chapter 5: Configuration One Shots Figure 5.8 Backlight Tab Intensity This parameter is used to adjust the light intensity of the 8515 keyboard backlight. Sliding the bar to the left darkens the keyboard backlight intensity, and sliding it to the right lightens the intensity. Options – ON For The value chosen from this dropdown menu determines the duration of time that the keyboard backlight stays on when a unit is not in use. Note: 5.6.
Chapter 5: Configuration Macro Keys The options in this tab allows you to determine how modifier keys on your 8515 behave. For each modifier key—[ALT], [SHIFT], [CTRL], [ORANGE] and [BLUE]—you have the following options in the drop-down menu: Lock, OneShot, and OneShot/Lock. Note: Keep in mind that checking the taskbar lets you know whether or not these keys are locked on.
Chapter 5: Configuration Macro Keys A macro has 200 programmable characters (or “positions”). The macro keys can be programmed to replace frequently used keystrokes, along with the function of executable keys including [ENTER], [BKSP] and [DEL] ([BLUE]-[BKSP]), function keys and arrow keys. 5.6.4.1 Recording And Saving A Macro You can program up to six macro keys. • In the Macro menu, highlight a macro key number—for example, Macro 1 to assign a macro to macro key [M1]. Tap on the Record button.
Chapter 5: Configuration Unicode Mapping Macro Keys [M1] And [M2] These keys are displayed in black print on the bottom row of executable keys on the keyboard. These macro keys are accessed by simply pressing the key. Macro Keys [M3] To [M6] These keys are displayed in blue print on the [M1] and [M2] keys in the bottom row of executable keys, and on the [N] and [M] keys in the first row of alpha keys on the keyboard.
Chapter 5: Configuration Scancode Remapping 5.6.5.1 Adding And Changing Unicode Values Important: Changes to Unicode mappings are not saved until you exit the Keyboard Properties dialog box. • Tap on the Add/Change button. Figure 5.13 Change Unicode Mapping • • Tap on a value in the Unicode mapping list—in the sample screen above, a value will be assigned to virtual key 0 (VK 0). Tap the stylus in the Unicode Mapping field, and type a Unicode value for the highlighted key. Note: 5.6.5.
Chapter 5: Configuration Scancode Remapping defines key presses that occur when the [ORANGE] modifier is on; the Blue table defines key presses that occur when the [BLUE] modifier is on. The default mappings of these scancodes can be overwritten for each of these three tables using the Scancode Remapping tab accessed from the Keyboard Properties dialog box. Figure 5.14 Scancode Remapping Tab The first column in the Scancode Remapping tab displays the Scancodes in hexidecimal.
Chapter 5: Configuration Lock Sequence • Type the scan code in hexidecimal in the field labelled Scancode: Note: 5.6.6.2 Label: field displays the default function of the scancode you are remapping. Virtual Key, Function And Macro The radio buttons along the side of the dialog box allow you to define to what the scan code will be remapped: Virtual Key, Function, or Macro. When Virtual Key is selected, you can choose to force [SHIFT] to be on or off when the virtual key is sent.
Chapter 5: Configuration Volume And Sound Properties Figure 5.16 Lock Sequence Tab Enable Key Lock Sequence Once the key lock sequence is enabled, the following options become available: - A popup message can be displayed when the keyboard is locked and a key is pressed. - The keyboard can be in lock mode when the computer is started. - The touchscreen can be disabled when the keyboard is locked.
Chapter 5: Configuration Volume Adjustments 5.7.1 Volume Adjustments Figure 5.18 Volume Tab • • Slide the volume button upward to increase the beeper volume or downward to decrease the beeper volume. Under the heading Enable sounds for, enable the conditions under which you want the 8515 to emit a beep. Note: 5.8 Sounds (wave files) cannot be played on 8515 units. The conditions under which 8515s emit sounds are tailored from within the application installed on your unit.
Chapter 5: Configuration Battery 5.8.1 Battery The Battery tab displays the status of the internal battery in your unit. Figure 5.20 Internal Battery Status If external power is removed, the battery will supply enough power to the computer to allow it to shut down gradually with up to 30 seconds of run time to do this. The display will be blank during this time. The computer will save any sessions, and the state of the computer is maintained.
Chapter 5: Configuration Advanced Power Properties When the 8515 is idle—not receiving any user input (a key touch, a scan, etc.) or system activity (serial data, an activity initiated by an application, etc.)—the value chosen in the Suspend Timeout dropdown menu determines when the unit will go to suspend state (appear to be off). When the time in the Suspend Timeout field elapses without any activity, the unit enters Suspend state.
Chapter 5: Configuration Devices 5.8.4 Devices Figure 5.23 Devices Tab Slot Power Status This tab allows you to enable or disable power to the CF slot in your unit. Built-In Devices Power Status A checkmark next to Enable Bluetooth indicates that the unit’s built-in, Bluetooth radio is enabled. 5.9 Stylus Properties Note: • Touchscreen calibration may not be enabled on your unit. If your screen appears to require recalibration, contact your supervisor. In the Control Panel, choose the Stylus icon.
Chapter 5: Configuration Setting Double-Tap Sensitivity 5.9.1 Setting Double-Tap Sensitivity • In the Double-Tap tab, follow the directions to tailor the sensitivity of the stylus when you tap on the touchscreen. Figure 5.25 Double-Tap Tab 5.9.2 Touchscreen Calibration Touchscreens rarely require recalibration.
Chapter 5: Configuration Disabling The Touchscreen 5.9.3 Disabling The Touchscreen Figure 5.27 Touch Tab • 5.10 Tap on the checkbox next to Disable the touch panel. The touchscreen will not accept screen taps. Manage Triggers This applet allows you to configure how bar code scanners are triggered. You can configure the trigger ID for each trigger button for both single- and double-click, and the doubleclick time. • In the Control Panel, choose the Manage Triggers icon. Figure 5.
Chapter 5: Configuration Trigger Mappings Figure 5.29 Manage Triggers Menu 5.10.1 Trigger Mappings A trigger mapping is an association between a particular key on the keyboard and a driver or application, the “owner(s)” of the trigger source. When the specified key is pressed, the owner (for example, a decoded scanner) is sent a message.
Chapter 5: Configuration Add And Edit Trigger Mapping Edit Tapping this button brings up the Edit mapping dialog box, so that you can edit existing trigger mappings. Remove Tapping this button removes an existing mapping. OK The OK button in the top right of the Manage Triggers screen saves all changes made. If the cancel button X is tapped instead, or the [ESC] key is pressed, all changes made will be discarded. 5.10.2 Add And Edit Trigger Mapping This dialog box is used to add trigger mappings.
Chapter 5: Configuration Certificate Assignment Trigger Type You can enable either an Up/Down or Double Click response to a trigger press. Normally, when a trigger (keyboard key, etc.) is pressed and released, a “trigger down” event is sent to the “owner”—that is, the application receiving the trigger press information followed by a “trigger up”. If Double Click is chosen in this menu, when the trigger is pressed, released, and then pressed again, a “double-click” event is generated.
Chapter 5: Configuration Bluetooth Setup Figure 5.32 Certificates Menu For a detailed description about Certificate setup for both the server and client-side devices (8515s), refer to the following website: www.microsoft.com/windows2000/techinfo/planning/walkthroughs/default.asp - "Security Services" Note: 5.12 When importing certificates, the 8515 only recognizes .cer files.
Chapter 5: Configuration The Devices Tab The Bluetooth Manager dialog box is used to display the other Bluetooth devices with which you can communicate. 5.12.1 The Devices Tab Note: If you intend to configure Bluetooth communication with specific devices (e.g., a scanner, printer, or headset), turn on the devices and bring them within 5 meters of the vehicle-mount before proceeding with the discovery process described below. Figure 5.34 Devices Tab 5.12.1.
Chapter 5: Configuration The Devices Tab Note: During the scanning process, addresses are located first, followed by names. Only the names of devices that are within the Bluetooth radio coverage range will be retrieved. The Active column indicates whether any service is activated for that device. When a service is activated, the device is displayed in the list even when it is not detected during the scan. The PIN column indicates whether you have a PIN (password) set for the device.
Chapter 5: Configuration The Devices Tab To add a service to the Outgoing port, an active service must first be deactivated. Then you can choose the ‘Outgoing’ option from the Activation menu (highlight a service, right-click or press the [SPACE] bar to display the Activation menu). The Authentication and Encryption options can be changed only before activation. To change these after activation, deactivate the service first, then change the options.
Chapter 5: Configuration The Servers Tab 5.12.2 The Servers Tab Figure 5.36 Servers The Bluetooth connection is initiated from your 8515 to the remote device—therefore the 8515 is called the ‘client’ and the remote is called the ‘server’. The Servers tab displays the server profiles that can be activated in your 8515. There is currently one server profile available: Serial. • Tap on the checkbox to activate the server, and it will display the associated port name beside the server name.
Chapter 5: Configuration Active Connections Tab Outgoing Port acts as a serial port that can be used to connect to a list of Bluetooth devices (one at a time), but you have the freedom to switch on-the-fly. The Outgoing Port checkbox allows you to create the Outgoing port. When the port is created, the Outgoing tab lists the port name. The Outgoing list dialog box displays a list of services marked as ‘Outgoing’. The * column indicates the currently selected service.
Chapter 5: Configuration Properties Tab flects the actual list of connections. The Type column of the table shows ‘ACL’ or ‘SCO’. The Connection list table shows the connections for scanning and the service connections. Note: 5.12.5 You can change the device-name and description of your radio by clicking on the System icon in Control Panel, which will open the System Properties dialog box. Click on the Device Name tab to access the menu and change your settings. Then click on OK.
Chapter 5: Configuration Storage Manager 5.13 Storage Manager The Storage Manager allows the user to view information about the storage devices that are present in the 8515, such as the Compact Flash card. 5.13.1 Formatting A Memory Card Formatting a memory card bulk-erases it. Once a card is erased, partitions may be created in it, similarly to those on a hard drive. Memory-card devices are normally ‘mounted’ (made available to the system) automatically when they are inserted.
Chapter 5: Configuration Creating Partitions 5.13.2 Creating Partitions Once the card is formatted, new partitions can be created in it. The default is to create one partition that occupies the whole card, but a card can be divided into more than one partition if desired. Each partition appears as a separate folder in Windows Explorer. To create new partitions: 1. Press the New button next to the Partitions listbox. The New Partition dialog appears: Figure 5.41 New Partition Dialog 2.
Chapter 5: Configuration Partition Management The new partition is automatically mounted. This is indicated by an asterisk (*) next to its name in the partition list. Any unallocated space on the card is indicated at the left, and additional partitions can be created in it. 5.13.3 Partition Management Partitions can be individually dismounted, mounted, deleted, or formatted as well. These and additional tasks are available from the Partition Properties dialog: Figure 5.43 Partition Properties Dialog 5.
Chapter 5: Configuration Partition Management 4. Press the Format button. The Format dialog appears: Figure 5.44 Format Dialog 5. Choose your format options. These options include: - Version of file system (FAT-16, for devices holding up to 4 GB; or FAT-32, for devices containing up to 32 GB). - Number of FATs (File-Allocation Tables). - Number of entries allowed in the root directory. - Cluster size (.5 KB to 64 KB).
Chapter 5: Configuration Total Recall 3. Press the Mount button. The partition is mounted. The asterisk appears next to its name in the partitions list. The Partition Properties dialog has buttons for additional functions. Partitions can be defragmented, and their file structure can be scanned. 5.14 Total Recall Total Recall is a Psion Teklogix utility developed to maintain applications and setting over cold boots. This utility is based on a backup and restore concept.
Chapter 5: Configuration Creating A Backup Profile 5.14.1.1 Profile Information Figure 5.47 Profile Information Dialog This dialog box lists the possible storage destinations for the profile file. • To begin, type a name for the profile in the field labelled Profile Name. The image type—OS Version and Registry Type—for the 8515 is displayed at the top of the dialog box. • Tap on the icon to expand the settings for Profile Type and Profile Location. Figure 5.
Chapter 5: Configuration Creating A Backup Profile • Tap on Next to display the next dialog box—Add Files. 5.14.1.2 Add Files Figure 5.49 Add Files Options By default, All Files: is selected so that all installed or copied files, database entries, and the Registry will be saved. You can, however, limit the backup to database, and/or the registry only. The Select Files option allows choose to limit the backup By Individual File, or you can choose to define which files will be backed up By File Type.
Chapter 5: Configuration Restoring A Profile Figure 5.51 View Selections • Tap on Next to perform the operation. 5.14.1.4 Performing The Backup Figure 5.52 Backup Dialog • 5.14.2 Tap on Backup to start the process and create a profile. Restoring A Profile To manually restore a profile: • • • Tap on the Total Recall icon. Choose Restore Selected Profile from the dropdown menu. Choose the Profile Name you want to restore from the Profile Name dropdown menu. Note: 5.
Chapter 5: Configuration Input Panel Tapping on the Input Panel button displays a soft input panel (soft keyboard) that can be customized using the Input Panel dialog box. Figure 5.53 Input Panel Icon Input Panel Button Icon Important: If the Input Panel Button icon is not visible in the taskbar, from the ‘Start’ menu, tap on Settings>Taskbar and Start Menu. Tap the checkbox next to ‘Show Input Panel Button’. To remove this icon from the taskbar, tap in the checkbox to erase the check mark.
Chapter 5: Configuration Input Panel Figure 5.54 Soft Keyboard Soft Keyboard Input Icon The soft keyboard operates just like a standard keyboard except that rather than pressing a key, you tap on letters, numbers, modifier keys, etc. on the 8515 screen. To customize the appearance and behaviour of the soft keyboard: • Tap on the Input Panel icon in the Control Panel. Figure 5.55 Input Panel Properties • Tap on the Options button to change the appearance of your soft keyboard.
Chapter 5: Configuration IPv6 Support Figure 5.56 Soft Keyboard Options 5.16 IPv6 Support The IPv6 Support icon in the Control Panel allows you to activate IPv6 network support on your unit. This internet protocol specification (version 6) supports 128-bit IP addresses, replacing version 4. Figure 5.57 IPv6 Support Icon • Tap on the icon to display the IPv6 Support dialog box. Figure 5.
Chapter 5: Configuration Scanner Settings 5.17 Scanner Settings The Teklogix Scanners icon in the Control Panel provides dialog boxes in which you can tailor bar code options and change the ports settings. If you wish to recover the factory defaults after making changes, the defaults can be applied by holding the stylus on a parameter, which will pop up a menu allowing you to default that parameter, or all settings. This option cannot be accessed without a touchscreen. Figure 5.
Chapter 5: Configuration Scanner Settings Options Tab Figure 5.60 Scanner Settings Options 5.17.2.1 Double Click Click Time (msec) This parameter controls the maximum gap time (in milliseconds) for a double-click. If the time between the first and second clicks of the scanner trigger is within this time, it is considered a double-click. The allowable range is 0 to 1000. A value of zero disables this feature.
Chapter 5: Configuration Translations Tab Scan Indicator When this parameter is enabled, the laser warning logo appears on the display whenever the scanner is activated. Scan Result Time (sec) The value assigned to the ‘Scan Result Time (sec)’ parameter determines how long the scan results of a successful scan are displayed on the screen. Time is measured in seconds, and a value of ‘0’ (zero) disables the parameter. When you choose this option, a dialog box appears where you can enter a value.
Chapter 5: Configuration Translations Tab Figure 5.61 Translations • In the Translations tab, choose the Case # to create rules. Figure 5.62 Cases • Double-tap on a No rule item in the dropdown list to display the rules. Figure 5.63 Case Rules When you choose a rule, an associated screen is displayed in which you can define the rule.
Chapter 5: Configuration Ports Tab Figure 5.64 Case Rule Definitions 5.17.3.1 Case Rules The case rules are defined as follows: • • • • • • • No rule—ignored. Match at index—matches the match string at a specified index. Match and replace at index—matches the match string at a specified index and replaces/changes it. Replace at index—replaces/changes unspecified data in a given range. Add barcode prefix/suffix—adds a global prefix or suffix. Verify barcode size—verifies the bar code size.
Chapter 5: Configuration Ports Tab 5.17.4.1 Serial Port (COM 1) Figure 5.65 Serial Port Settings Enabled This parameter must be set to on in order for the 8515 to recognize the device connected to the serial port. Power Double-tapping on this parameter displays a dialog box in which you can choose to disable (turn off) this port, or you can assign 5V power to the port. Figure 5.
Chapter 5: Configuration SNMP (Simple Network Management Protocol) Setup Data Bits This parameter determines the number of bits for the data going through this port. Doubletapping on this option displays a pop-up window in which you can choose either 7 or 8 data bits. Figure 5.68 Data Bits Options Parity This parameter determines the type of parity checking used on the data going through the tether port.
Chapter 5: Configuration Contacts Tab ment Station can access. Each product has a defined set of MIBs that determine how SNMP operates, the type of access allowed etc. All Psion Teklogix products support the TEKLOGIX-GENERIC-MIB—a MIB that defines some common features across Teklogix products. All devices also support MIB-II, a management information base that defines the common features of TCP/IP networks. The SNMP Agent software embedded in the 8515 supports SNMPv1 (RFC 1157).
Chapter 5: Configuration Communities Tab 5.18.2 Communities Tab Figure 5.73 Communities Options The Communities tab provides a means of limiting access to SNMP managed devices to those SNMP Managers with matching “community names”, as specified by RFC 1157. 5.18.2.1 Enable SNMP Enabling Enable SNMP allows the device to respond to SNMP queries and to send Traps. After enabling this option and rebooting the device, the SNMP Agent will automatically start up.
Chapter 5: Configuration Trap Destination Tab 5.18.2.3 Modifying A Community Setting To modify an existing community: • • Highlight the community you want to alter. Tap on Change. Figure 5.75 Modify Community Dialog A Modify Community dialog box is displayed, listing the community you highlighted. • Edit the Name and/or Rights, and press [ENTER] to save your changes. 5.18.2.
Chapter 5: Configuration Trap Destination Tab 5.18.3.1 Enabling Authentication TRAPS Checking Enable Authentication TRAPS allows authorization traps to be sent when a failure is detected (e.g., an SNMP message received with a bad community name). 5.18.3.2 Adding A Destination • To add a new destination, tap on the Add button. Figure 5.77 Add IP Address Dialog • Type a destination in the text box provided, and press [ENTER]. 5.18.3.
Chapter 5: Configuration Permitted Hosts Tab • Tap on the Remove button. A Delete Confirmation screen is displayed. • • 5.18.4 To remove a destination, tap on Yes, or If you decide not to remove the destination, tap on No. Permitted Hosts Tab For security reasons, the Network Administrator may want to restrict SNMP-node access to a known sub-set of SNMP Managers. This tab lists the IP addresses of all the SNMP Managers which are allowed to monitor and manage this device.
Chapter 5: Configuration Permitted Hosts Tab • Highlight the IP address you want to alter in the Permitted Hosts tab, and then tap on the Change button. A dialog box like the one displayed when you add a host is displayed. • Make the necessary changes, and press [ENTER].
6 PERIPHERAL DEVICES & ACCESSORIES 6.1 External Bar Code Readers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 6.1.1 Entering Data With The Bar Code Reader . . . . . . . . . . . . . . . . . . .125 6.2 Bluetooth Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 6.3 Linking An 8515 To An Ethernet Network . . . . . . . . . . . . 6.3.1 Network Access . . . . . . . . . . . . . . . . . . . . . . . 6.4 8515 Mounting Accessories: Installing The RAM Mounting Kit. 6.
124 Psion Teklogix 8515 Vehicle-Mount Computer User Manual
Chapter 6: Peripheral Devices & Accessories External Bar Code Readers 6.1 External Bar Code Readers The 8515 supports these external decoded scanner types: • 1D Scanner. • 2D Standard Range Raster Laser Scanner (PDF417). • 2D Imager. • RFID Scanner. To connect a scanner to the 8515, attach the device to either the UART or USB port. Please refer to the scanner-specific programming manual provided by the manufacturer before you begin. 6.1.
Chapter 6: Peripheral Devices & Accessories Linking An 8515 To An Ethernet Network 6.3 Linking An 8515 To An Ethernet Network A USB-Ethernet adaptor cable—model number WA4010-G1—is used to connect the 8515 to an Ethernet network. Figure 6.1 USB-Ethernet Adaptor Cable USB Connector Ethernet Port • • 6.3.1 Insert the adaptor’s USB connector into the Host USB port on the 8515. Connect your network Ethernet cable to the Ethernet port on the adaptor cable.
Chapter 6: Peripheral Devices & Accessories 8515 Mounting Accessories: Installing The RAM Mounting Kit Warning: Failure to install the mount correctly, or modifications to the mount, may result in serious injury or damage to property. Contact Psion Teklogix Technical Support or your Psion Teklogix representative if you have problems installing this mount (see Appendix A: “Support Services / Worldwide Offices” ).
Chapter 6: Peripheral Devices & Accessories Component Part Numbers ance (see Appendix A: “Support Services / Worldwide Offices” ). Note also that for better protection, the equipment should be mounted inside the vehicle roll cage. Use of the Powered Fork Lift Cradle while charging the fork truck battery is prohibited. Important: Safeguards To avoid possible injury, this device must be properly secured when in a moving vehicle. Keep this device away from magnetic fields.
Chapter 6: Peripheral Devices & Accessories MT33XX RAM Mounting Kit Specifications Table 6.1 Mounting Components And Figure Legend 6.4.2 N Mounting Kit MT3509 (Rail base (for 4" or 12" RAM arm, 1¼" to 17/8") 9007509 P Mounting Kit MT3510 (Rail base (for 4" or 12" RAM arm, 2" to 2 ½") 9007510 MT33XX RAM Mounting Kit Specifications Max. Load: 15kg Articulating Range: Spherical through 180 degrees.
Chapter 6: Peripheral Devices & Accessories Preparation Figure 6.3 Bolt Hole Pattern For RAM Circular Base 6.4.3 Preparation The RAM articulating mount can be installed in a variety of orientations (see Figure 6.9 on page 135). Select the best orientation for your specific application. Preferred orientations maintain the centre of mass of the vehicle-mount assembly, directly over the centre of the base (see Figure 6.4). Figure 6.
Chapter 6: Peripheral Devices & Accessories Preparation Important: The tilt and rotation of the cradle can be easily adjusted by the operator. Ensure that if the handscrew is loosened and the cradle slips, the operator and any equipment cannot be damaged by it. Also note that under extreme vibration, the mount may slowly ‘settle’, requiring readjustment and tightening of the handscrew. Psion Teklogix offers a tightening tool (P/N 9000594) which can be used to minimize settling. Figure 6.
Chapter 6: Peripheral Devices & Accessories Installation 6.4.4 Installation Figure 6.6 8515 Vehicle-Mount Computer With Mounting Bracket Back of 8515 showing location of screw holes. A B C D 1. Attaching the mounting bracket and RAM base to the vehicle-mount: The kit provides four screws and washers that are used to secure the mounting bracket to the vehicle-mount. Figure 6.6 provides a diagram and a legend to help you attach the mounting bracket and the RAM Vesa base to the vehicle-mount.
Chapter 6: Peripheral Devices & Accessories Installation Figure 6.7 Mounting Bracket Attached To The 8515 2. Secure the RAM Base to the local platform and attach RAM Standard Arm: Use the supplied bolt hole pattern to drill the required holes in the local platform. Hole diameters must not exceed 10mm [13/32 inches]. Hardware (G, H, C, and J) for securing RAM Bases (B or F) to the local platform are in the recommended sizes (see Table 6.1 on page 128).
Chapter 6: Peripheral Devices & Accessories Positioning The Vehicle-Mount Figure 6.8 RAM Vesa Base RAM Circular Base E E G B C J H F C J 6.4.5 Positioning The Vehicle-Mount Place the 8515 into the position best corresponding to the RAM hardware used (see Figure 6.9 on page 135) and tighten by hand until secure. Refer to “8515 Mounting Accessories: Installing The RAM Mounting Kit” on page 126 for warnings and proper tightening technique. Mount orientations shown in Figure 6.
Chapter 6: Peripheral Devices & Accessories Optional Mount Kits Figure 6.9 Circular Base and Vesa Base Mount Orientations 15° 70° Circ. Base To Platform 6.4.6 15° 70° Vesa Base To Platform Optional Mount Kits One of the mounting kits shown in Figure 6.10 on page 136 may be substituted for the Vesa Base (B) or the circular base (F) when mounting to a post or forklift roll cage. To Install: Mount the Clamp Base and Lower Base around the shaft.
Chapter 6: Peripheral Devices & Accessories 8515 Vehicle-Mount Computer Installations Figure 6.10 Optional Mount Kits SCREW CLAMP BASE SCREW CLAMP BASE LOWER BASE LOWER BASE NUT NUT MT3505 MT3507 NUT NUT CLAMP BASE CLAMP BASE LOWER BASE LOWER BASE SCREW SCREW MT3509 MT3510 6.5 8515 Vehicle-Mount Computer Installations 6.5.
Chapter 6: Peripheral Devices & Accessories Non-Vehicle Installations Note: 6.5.2 Make sure the cables run inside the roll cage of the vehicle. Non-Vehicle Installations Using AC power, the 8515 Vehicle-Mount Computer can be mounted at fixed locations adjacent to cross-dock doors, manufacturing stations, or in offices. The 110/220V Psion Teklogix AC adaptor Model PS1400 should be used to power the computer from an AC source. 6.5.
Chapter 6: Peripheral Devices & Accessories Wiring Vehicle Power To The 8515 1. Attach the pre-regulator cable with male connector to the Psion Teklogix extension power cable P/N 13985-302, which has been installed on the vehicle. Important: The Psion Teklogix extension power cable P/N 13985-302 positive lead is red and the negative lead is black. It is recommended that all connections be secured with electrical tape or heat shrink to prevent contaminants from degrading the connection. 2.
Chapter 6: Peripheral Devices & Accessories Wiring Vehicle Power To The 8515 Figure 6.
SPECIFICATIONS 7 7.1 8515 Vehicle-Mount Computer Specifications . . . . . . . . . . . . . . . . . . . .143 7.2 Colour Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 7.3 Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 7.4 External Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145 7.5 Internal Lithium-Polymer Battery . . . . . . . . . . . . . . . . . . . . . . . . . . .145 7.
142 Psion Teklogix 8515 Vehicle-Mount Computer User Manual
Chapter 7: Specifications 8515 Vehicle-Mount Computer Specifications Note: 7.1 Performance specifications are nominal and subject to change without notice. 8515 Vehicle-Mount Computer Specifications Size 203 mm x 209 mm x 50 mm (7.99"x 8.23" x 1.97") Weight Approximately 1.3 kg (2.
Chapter 7: Specifications Colour Display One USB V 1.1 device port Allows 8515 to appear as USB peripheral to USB host computer Data rate: 12 Mbps; >50 Kbps ActiveSync throughput Approvals Safety UL 60950-1, CAN/CSA-C22.2 NO. 60950-1 LVD EN 60950-1 EMC North America FCC Part 15 Class B Europe Complies with R & TTE Directive for Radio approval. Complies with EMC Directive 2004/108/EC for EMC approval. Compliance with Automotive Directive 95/54/EC for e-marking.
Chapter 7: Specifications External Power 7.4 7.5 Function Keys 10 dedicated function keys Key Illumination Adjustable backlight External Power Power Input range 10 VDC to 30 VDC Power Output range 5 VDC, 6A (max 30W) Internal Lithium-Polymer Battery Not user accessible. 7.6 Technology 350 mA @ 3.
Chapter 7: Specifications Radio Specifications Data Rates 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: 1, 2, 5.5, 11 Mbps Model RA2041: Summit DC 802.11 SC CF radio Direct Sequence Spread Spectrum (DSSS) radio. Form factor Compact Flash Type I extended Antenna port Two Hirose U.FL connectors for antenna diversity Transmit Power 802.11g: 32 mW maximum (+15 dBm) 802.11b: 80 mW maximum (+19 dBm) Frequency Range 2.400 GHz to 2.
Chapter 7: Specifications External Bar Code Scanners 7.7 External Bar Code Scanners Supported Types Decoded scanners: 1D, 2D Standard Range Raster Laser, 2D Imager, RFID. (Refer to “Ports Tab” on page 113 for details.) Interface Via FF UART DE-9 port or USB port. Decoded Codes Supported Dependent on external scanner choice. Code Discrimination Automatic for all selected codes. Decoded input is external scanner dependent.
APPENDIX A SUPPORT SERVICES / WORLDWIDE OFFICES Psion Teklogix provides a complete range of product support services to its customers worldwide. These services include technical support and product repairs. A.1 Technical Support For technical support in North America: Call Toll free: +1 800 387 8898 Option 3, or Direct Dial: Option 3 +1 905 813 9900 Ext. 1999 For technical support in EMEA (Europe, Middle East and Africa), please contact the local office listed in the website below: http://www.
Appendix A: Support Services / Worldwide Offices Worldwide Offices A.3 Worldwide Offices A.3.1 Company Headquarters Psion Teklogix Inc. 2100 Meadowvale Boulevard Mississauga Ontario Canada L5N 7J9 Tel: +1 905 813 9900 Fax: +1 905 812 6300 E-mail:salescdn@psion.com A.3.2 Canadian Service Centre Psion Teklogix Inc. 7170 West Credit Ave., Unit #1 Mississauga, Ontario Canada L5N 7J9 Tel: +1 800 387 8898Option 2 - or Direct: + 1 905 813 9900Ext. 1999 Option 2 Fax: + 1 905 812 6304 Web: www.psionteklogix.
Appendix A: Support Services / Worldwide Offices International Subsidiaries A.3.4 International Subsidiaries See also www.psionteklogix.com/Subsidiaries . Psion Teklogix S.A. La Duranne 135 Rue Rene Descartes BP 421000 13591 Aix-En-Provence Cedex 3; France Tel: +33 4 42 90 88 09 Fax: +33 4 42 90 88 88 E-mail:tekeuro@psion.
APPENDIX B PORT PINOUTS B.1 Serial Port Interface Pinout (DB-9 male) Table B.
Appendix B: Port Pinouts Enhanced USB1 Port Interface Pinout B.2 Enhanced USB1 Port Interface Pinout Table B.2 Signal # 1 2 3 4 Enhanced USB1 Pinout* Function Signal USB– VBUS USB– DUSB– D+ Ground RS-232 Serial Port Transmit Data RS-232 Serial Port Receive Data DCD RXD TXD DTR 7 Ground RTS 8 Port Detection ID CTS 9 PCON Programming Switch 5 6 GND DSR Type USB USB USB USB PCON console PCON console PCON console PCON console PCON console Notes Switched 5V @ 0.
Appendix B: Port Pinouts Enhanced USB2 Port Interface Pinout Table B.3 Enhanced USB2 Pinout* Signal # Function 8 Port Detection ID 9 NC Signal CTS Type PXA console PXA console Notes 23K2 pull-down resistor for PXA console detection Open for PXA console port * Signal definitions are with respect to the 8515 Vehicle-Mount Computer side.
APPENDIX C USB SETUP APPLICATION C.1 USB Setup The USB Setup application is used to update a Windows 2000 or XP PC so that it can connect to a Psion Teklogix 8515 Vehicle-Mount Computer. Note: For details on connecting devices to Windows Vista™ PCs, see page 43. To download the USB Setup application, go to: www.psionteklogix.com/downloads This will take you to the Teknet home page. • Login with your Teknet Username and Password.
Appendix C: USB Setup Application Launching The Application Figure C.1 Welcome Dialog If you check the “Install as a generic device” checkbox, the Hardware Manager on your PC will not prompt you to install every new device you connect to your PC. A generic configuration will be used for the Psion Teklogix devices. 3. Tap on the Install button to configure your PC or the Cancel button to exit the USB Setup program. The program checks that ActiveSync is installed and that it is a supported version—3.
Appendix C: USB Setup Application Installation Complete Dialog Box Figure C.2 Installation Dialog Usually, this dialog is shown when more than one version of ActiveSync is installed. You can either select the correct inf file for the USB Setup program to work with, or you can cancel the installation, and uninstall the extra copies of ActiveSync. C.1.2 Installation Complete Dialog Box Figure C.3 Installation Successful This dialog box indicates the success or failure of the installation.
Appendix C: USB Setup Application Installation Complete Dialog Box 4. Tap on Exit to exit the application. If you need to view the log file, tap on View Log. Once the USB Setup program is exited, you can connect the vehicle-mount to your PC using a USB cable, and turn the unit on. If the USB Setup process was successful, the “Found new hardware” wizard may start. If this occurs, choose the recommended defaults. ActiveSync will detect your 8515.
INDEX A accessories bar code readers, connecting 125 Ethernet adaptor cable 126 Active Conn Tab 96 ActiveSync ASync profile 93 ActiveSync, connecting to Windows PC 43 adaptor cable USB-Ethernet 126 Ad Hoc network 12 Advanced (wireless connection) 16 ALT Key 36 appearance (display colour scheme) 70 approvals, regulatory 144 arrow keys moving the cursor 35 audio indicators description of beep conditions 41 Authentication, Bluetooth Controls 94 authentication, network 13 B backlight display 71 keyboard 38 b
Index connection list table, Bluetooth Controls 96 Contact 116 Contacts 116 control panel accessing 65 Display Properties 70 icons 66 keyboard properties 72 power management properties 82 stylus properties 85 CTRL Key 36 cycle tasks 56 D data entering with a bar code reader 125 Data Bits 115 decoded (external) parameters 114 decoded scanners 109 DEL Key 35 desktop connection, remote 65 Device Name, changing 97 dialog box, using 59 Dim For, backlight 72 dismounting partitions 100 display appearance (colou
Index ISM band, Bluetooth radio 91 K keyboard key repeat 72, 73 one shot mode 74 keyboard backlight 38 keyboard keys 34 ALT 36 arrow keys 35 BKSP 36 BLUE key 35 CTRL 36 DEL 35 END 36 ESC 36 Function keys 36 HOME 36 INS 35 macro keys 37, 75 modifiers 34 navigating using the keyboard 47 one shot mode 74 ORANGE key 35 SHIFT 35 SPACE 36 TAB 36 Keyboard Properties 73 backlight 73 lock sequence 80 one shot mode 74 Keyboard Properties 72–80 Key Index, assigning 14 Key Repeat tab 72 L LANAccessUsingPPP service
Index dust caps 43 pinouts 1 power AC 137 DC 137 extension power cable 137 pre-regulator 137 Power (Serial Port) 114 power icon 40 Power Management Properties 82 devices (card slots) 85 suspend, power saving 83 power up 8515 8 preferred networks 17 pre-regulator, power 137 Printer (serial service), Bluetooth 93 profile, creating backup 102 profile, restoring backup 105 Programs Command Prompt 54 Internet Explorer 54 Remote Desktop Connection 54 Windows Explorer 54 punctuation marks, accessing (SHIFT Key) 3
Index Bad Scan Beep 111 Cases 111 Click Data 110 Click Time 110 decoded 109 decoded (external) Serial Port 114 Display 110 Double Click 110 Good Scan Beep 111 LED Indicators 41 Options Tab 109 PDF scanner, operating 42 Scan Indicator 111 Scan Log File 111 Scan Result 110 Scan Result Time 111 Soft Scan Timeout 111 techniques 41 Translations Tab 111 troubleshooting 42 1D Laser, operating 42 Scan Result 110 Scan Result Time (sec) 111 screen stylus, using to navigate 47 touch pen, using 47 Windows Embedded CE
Index Start Menu 52 cycle tasks 56 desktop 52 programs 54 Run 57 Security 52 Settings 57 Shutdown 58 system tray 56 task manager 56 Stop Bits 115 stylus (touch pen), using 34, 47 Stylus Properties 85 Double-tap (stylus sensitivity) 86 Summit Client Utility (SCU) 17 Summit DC-802.
Index 802.11b radio, configuring 9 802.
Index VIII Psion Teklogix 8515 Vehicle-Mount Terminal User Manual
