User manual

Chapter 5: Configuration
Power Properties
74 Psion Teklogix 8515 Vehicle-Mount Computer User Manual
Trigger Type
You can enable either an Up/Down or Double Click response to a trigger press. Normally,
when a trigger (keyboard key, etc.) is pressed and released, a “trigger down” event is sent to
the “owner”—that is, the application receiving the trigger press information followed by a
“trigger up”. If Double Click is chosen in this menu, when the trigger is pressed, released,
and then pressed again, a “double-click” event is generated. If a mapping with the type
Up/down has also been configured for the same source, it will only receive the first set of
trigger events.
Trigger Owner
This identifies the driver or application receiving the trigger presses.
Show All
By default, inactive owners are not shown. By checking this checkbox, all owners, both
active and inactive, are displayed.
5.5.7 Power Properties
This icon allows you to define the Suspend state of your unit and to turn power on and off
for the CF card slot. Power Properties also allows you to enable and disable the built-in Blu-
etooth radio.
•In the Control Panel, choose the Power icon.
Figure 5.24 Power Icon
5.5.7.1 Battery
The Battery tab displays the status of the internal battery in your unit.