User manual

Chapter 5: Configuration
Active Connections Tab
Psion Teklogix 8515 Vehicle-Mount Computer User Manual 85
5.6.4 Active Connections Tab
Figure 5.40 Active Conn. Tab
The Active Conn. tab lists the Name, Address, and Type of the currently active connections.
The table is periodically updated while on display, but it can take a few seconds before it re-
flects the actual list of connections. The Type column of the table shows ‘ACL’ or ‘SCO’.
The Connection list table shows the connections for scanning and the service connections.
Note: To add a service to the Outgoing port, an active service must first be deacti-
vated. Then you can choose the ‘Outgoing’ option from the Activation menu
(highlight a service, right-click or press the [SPACE] bar to display the Acti-
vation menu).
Note: You can change the device-name and description of your radio by clicking on
the System icon in Control Panel, which will open the System Properties
dialog box. Click on the Device Name tab to access the menu and change
your settings. Then click on OK.
Although the name will have changed in the Properties menu in Bluetooth
Controls, the radio only reads it on boot-up. For the changes to take effect,
you must reset the 8515.