User manual

Chapter 6: Peripheral Devices & 8515 Installations
Preparation
Psion Teklogix 8515 Vehicle-Mount Computer User Manual 121
Figure 6.5 Tightening Tool P/N 9000594
The mounting platform on which you secure the computer must be strong enough to support
25 kg. Never attach the mount to a plastic dash or a wooden platform without the appropri-
ate backing plate and bracing. When selecting a mounting location, you must provide the
operator access at the top, bottom, and sides.
Important: The tilt and rotation of the cradle can be easily adjusted by the operator.
Ensure that if the handscrew is loosened and the cradle slips, the operator
and any equipment cannot be damaged by it. Also note that under extreme
vibration, the mount may slowly ‘settle’, requiring readjustment and tight-
ening of the handscrew. Psion Teklogix offers a tightening tool (P/N
9000594) which can be used to minimize settling.