User manual

Chapter 6: Peripheral Devices & 8515 Installations

Installation

122 Psion Teklogix 8515 Vehicle-Mount Computer User Manual

6.4.4 Installation

Figure 6.6 8515 Vehicle-Mount Computer With Mounting Bracket

1. Attaching the mounting bracket and RAM base to the computer: The kit provides

four screws and washers that are used to secure the mounting bracket to the computer.

Figure 6.6 provides a diagram and a legend to help you attach the mounting bracket and

the RAM Vesa base to the computer. To do this:

• Apply Loctite 243 to the screw threads (Note: Loctite is not supplied by Psion Tek-

logix). Match the four screw holes on the back of the 8515 with the appropriate pairs

of holes on the bracket and screw them together by placing the Screw (D) through the

Washer (C) and the RAM Vesa Base (B), and then affixing it to the 8515 (A).

• Torque to 26 in-lbs.

Back of 8515 showing

location of screw holes.