User manual

Chapter 6: Peripheral Devices & 8515 Installations
Optional Mount Kits
Psion Teklogix 8515 Vehicle-Mount Computer User Manual 125
Figure 6.9 Circular Base and Vesa Base Mount Orientations
6.4.6 Optional Mount Kits
One of the mounting kits shown in Figure 6.10 on page 126 may be substituted for the Vesa
Base (B) or the circular base (F) when mounting to a post or forklift roll cage.
To Install: Mount the Clamp Base and Lower Base around the shaft. Place the Screw
through the Clamp and the Lower Base, and affix with the Nut. Torque to 26 in-lbs. Secure
the RAM Standard Arm (E) by inserting the RAM Balls into both ends of the arm sockets.
Vesa Base To PlatformCirc. Base To Platform
15°
70°
70°
15°