User manual

Chapter 5: Configuration
Power Suspend
90
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
5.5.4.1 Power Suspend
Note: A Battery tab is only available when the security level is set to Teklogix.
•In the Power Properties dialog box, open the Suspend tab.
Figure 5.19 Power Suspend Properties
Switch State To Suspend
When the 8525/8530 is idle – not receiving any user input (a key touch, a scan, and
so on) or system activity (serial data, an activity initiated by an application, and so
on), the value assigned in the Switch State To Suspend field determines when the
unit will go to suspend state (appear to be off).
When the time in the Suspend field elapses without any activity, the unit enters
Suspend state. In Suspend state, the 8525/8530 CPU enters a sleep state, and the
radio is shut off. The state of the device (RAM contents) is preserved. Pressing
[ENTER] wakes the system from suspend state. When the 8525/8530 is in suspend
state, the network connection is broken immediately; you must re-establish the
network connection.