User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 95

Chapter 5: Configuration

Info Tab

The “Power” information in this screen indicates the power of the radio installed in

the unit – 0.5 or 1.0 W. The “Serial Number” is the identifier for the radio and is

used by the protocol when the “Auto Radio Address” parameter is enabled. The

“CIS Data” (Card Information Structure) is manufacturer information describing the

PC Card installed in the 8525/8530. “DSP x.x / FPGA 0xNN” indicates the

firmware revision of the radio’s DSP (x.x) and FPGA (0xNN) where x.x and NN

represent actual revision numbers.

Statistics Screen

• Tap on the Statistics button to display the Protocol Statistics screen.

These statistics are updated every second while the dialog box is displayed.

Figure 5.29 Protocol Statistics

The following table provides a brief description of these statistics:

Statistic Description

Channel quality. See the description of the “Channel Switch Speed” parame-

ter in the channel tab for more information on how “cq” affects channel

switching (see “Channel Switch Speed” on page 99).

ch Current channel

Monitor state of RF Link: LOCKED=0, LOCKPENDING=1, LOWC-

QWAIT=2, SCANNING=3, STARTUP=4, ABANDON=5

rm Number of received messages, complete application messages