User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 97
Chapter 5: Configuration
Info Tab
Table 5.2 Low Level Statistics Descriptions
Default All Parameters
• Tap on the Default all Parameters button to return all registry parameters
to default values.
When this button is pressed, a screen appears asking if you’re sure you want to
return all parameters to their default values.
• Tap on the Ye s button to return values to their default settings.
Note: This button does not default the radio parameters set under the Radio tab.
RxEr Message buffers received with detected errors
RxOv Number of transmitted messages, complete application messages
TxOk Message buffers successfully transmitted
TxEr Message buffers which failed to transmit
CD Number of carrier detect changes detected
Coll Number of collisions detected
Tx D
Actual difference in time (in RTC ticks) between when the most recent trans-
mit (with timestamp) was scheduled to start and when it actually started.
TxMD Maximum "Tx D" value
Rx X
Number of extra characters received for last received message (due to delay
in host reporting back actual body size)
RxMx Maximum "Rx X" value
MChg Number of completed mode changes