User manual

Chapter 5: Configuration

Channel Tab

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual

5.6.2 Channel Tab

Figure 5.31 Channel Tab

Channel Number

This parameter determines the operating radio channel of the 8525/8530. The

allowable range for this parameter is

1 to 20. The default value is 1.

Note: The Channel Number dropdown menu displays only the channels that

have been enabled in the Channel Enable List.

Power Up Channel

When this parameter is enabled, the 8525/8530 begins communicating on the

channel specified in the Channel Number parameter when the unit is powered up.

This setting may prevent the migration of 8525/8530s to the same channel due to

uneven coverage in some sites.

If this parameter is disabled (unchecked), the unit will continue communicating on

the same channel that it was on before it was powered off.