User manual

Chapter 5: Configuration
Radio Tab
106
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
Power Off Time
This parameter determines the amount of time (in seconds) the 8525/8530 radio
stays in power-down mode when a power down period has been initiated. “Power
Off Time” is only used when the “Enable Power Saving” parameter is enabled.
The allowable range for this parameter is 1 to 60.
5.6.5 Radio Tab
Figure 5.37 Radio Tab
Modulation/Baud Rate
The options in the Modulation / Baud Rate dropdown menu are: 2 Level/4800,
2 Level/9600, 4 Level/9600
and 4 Level/19200. The value assigned to this
parameter must be identical to the corresponding parameter in the Psion Teklogix
Base Station. This parameter is stored in the radio’s non-volatile memory. The
default value for Modulation/Baud Rate is
2 Level/9600
Data Squelch
“Data Squelch” controls the radio receiver, cutting it off when the signal is too weak
for reception of anything but noise. Receive Signal Strength Indicator values below
the “Data Squelch” threshold prevent further processing of the receive signal while
higher values allow further processing. The allowable range is 0 to 100 with a
default value of 0.