User manual

Chapter 5: Configuration
The Properties Tab
114
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
The Active Conn. tab lists the Name, Address, and Type of the currently active
connections. The table is periodically updated while on display, but it can take a few
seconds before it reflects the actual list of connections. The Type column of the table
shows ‘ACL’ or ‘SCO’. The Connection list table shows the connections for
scanning as well as the service connections.
Note: You can change the device-name and description of your radio by clicking
on the System icon in Control Panel, which will open the System Proper-
ties dialog box. Click on the Device Name tab to access the menu and
change your settings. Then click on OK.
Although the name will have changed in the Properties menu in Bluetooth
Controls, the radio only reads it on boot-up. For the changes to take effect,
you must reset the 8525/8530.
5.7.4 The Properties Tab
Figure 5.44 Bluetooth Properties Tab
The Properties tab displays information about your 8525/8530, and provides some
port options.
The Device Name field shows the device name of your 8525/8530. This name can
be changed (see the Note in this section for details).
Device Class shows the Class of Device (e.g. desktop), which is always set to
vehicle-mount.
Local Bluetooth Address shows the address of your 8525/8530 radio.
Port Prefix is used to set the port name to either BSP or COM. When the name is
set to BSP, BSP2 to BSP9 are available for activated services (including the server).
When COM is chosen, COM7 to COM9 are available.