User manual

Chapter 5: Configuration
EAN 8
136
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
5.11.2.5 EAN 8
Enabled
Set this parameter to ‘on’ to enable EAN 8 or ‘off’ to disable it.
Include Check
If this parameter is enabled (set to “Y”), the check digit is included with the decoded
bar code data.
Addendum
Important: Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 130) must be enabled (set to ‘ON’).
Refer to “Addendum” on page 134.
Prefix/Suffix Chars
See “Prefix/Suffix Chars” on page 135.
5.11.2.6 UPC A Settings
Enabled
Set this parameter to ‘on’ to enable UPC A or ‘off’ to disable it.
Include Number Sys
If this parameter is enabled (set to ‘ON’), the number system digit is included with
the decoded bar code data.
Include Check
If this parameter is enabled (set to ‘ON’), the check digit will be included with the
decoded bar code data.
Addendum
Important: Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 130) must be enabled (set to ‘ON’).
Refer to “Addendum” on page 134.