User manual

Chapter 5: Configuration
Serial Port
142
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
Parity
This parameter determines the type of parity checking used on the data going
through the tether port. Double-tapping on this option displays a pop-up window in
which you can choose the appropriate Parity.
Figure 5.78 Parity Settings
Stop Bits
This parameter specifies the number of stop bits – 1, 1.5 or 2 – used for
asynchronous communication.
5.11.3.2 Serial Port
Figure 5.79 Serial Port Settings
Enabled
This parameter must be set to on in order for the 8525/8530 to recognize the device
connected to the serial port.