User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 143
Chapter 5: Configuration
Translations
Baud
Double-tapping on this parameter displays a pop-up window in which you can
choose an appropriate baud rate.
Figure 5.80 Serial Port Baud Rates
Data Bits
This parameter determines the number of bits for the data going through this port.
Double-tapping on this option displays a pop-up window in which you can choose
either 7 or 8 data bits.
Parity
This parameter determines the type of parity checking used on the data going
through the tether port. Double-tapping on this option displays a pop-up window in
which you can choose the appropriate Parity.
Stop Bits
This parameter specifies the number of stop bits – 1, 1.5 or 2 – used for
asynchronous communication.
5.11.4 Translations
Figure 5.81 Translation Tab