User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 183
Chapter 6: Tekterm Application
Retrieving Default Parameter Values
If a parameter value is changed and the menu exited before the change is saved, a
dialog box appears asking whether or not the operator wants to save the changes.
6.11.4 Retrieving Default Parameter Values
Important: When [F3] – the DEFAULT key – is pressed, all parameter values
revert to the factory defaults, including those values that you’ve
changed and saved.
• Press [F3] – the “DEFAULT” function key, or tap the stylus on the
“DEFAULT” softkey label – to reinstate the default parameter values.
• Press [F4] – the “SAVE” function key, or tap the stylus on the “SAVE”
softkey label – to save the changes.
• Reset the 8525/8530. See "Resetting The 8525/8530 Vehicle-Mount" in the
next section.
6.12 Resetting The 8525/8530 Vehicle-Mount
Some parameter adjustments require that the 8525/8530 be reset before the changes
can take effect. To reset the unit:
• Press and hold down the [BLUE] key and the [ENTER/ON] key simulta-
neously for a minimum of six seconds.
A reset results in a complete reboot of the unit. All RAM memory contents are lost.
The contents of the flash memory and memory card are preserved. When the
8525/8530 is reset, the screen displays the Psion Teklogix and Microsoft®
Windows® CE .NET splash screen before displaying the startup desktop.
6.13 The Parameters Menu
• At the ‘Display’ menu, type a to display the Parameters menu.
More Parameters » see page 185
Security User see page 184
Display » see page 184
01
Parameters
Range