User manual

Chapter 6: Tekterm Application
Audio
190
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
6.17.2 Audio
Figure 6.8 Audio Menu
Beep Tone And Beep Time
These parameters regulate the frequency and duration of beeps emitted in a TESS or
ANSI session when one of the following is received at the 8525/8530: an advisory, a
hey you or a bell character. Tone is measured in hertz and time in milliseconds.
Error Tone And Error Time
These parameters determine the frequency and duration of each error tone. Tone is
measured in hertz and time in milliseconds.
Scan Tone 1 And Scan Time 1
“Scan tone 1” and “Scan time 1” determine the frequency and duration of the first
beep of a multiple beep. Tone is measured in hertz and time in milliseconds.
Scan Tone 2 And Scan Time 2
“Scan tone 2” and “Scan time 2” determine the frequency and duration of the
second beep of a multiple beep. Tone is measured in hertz and time in milliseconds.
Scan Tone 3 And Scan Time 3
“Scan tone 3” and “Scan time 3” determine the frequency and duration of the third
beep of a multiple beep. Tone is measured in hertz and time in milliseconds.
Beep Tone 3000 800-3000
Beep Time 250 0-2000
Error Tone 1000 800-3000
Error Time 1000 0-2000
Scan Tone 1 1500 800-3000
Scan Time 1 100 0-2000
Scan Tone 2 2000 800-3000
Scan Time 2 100 0-2000
Scan Tone 3 2500 800-3000
Scan Time 3 100 0-2000
Sounds Ctrl Panel » see text
Range
Audio
04