User manual

Chapter 6: Tekterm Application
User Permissions
192
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
6.17.4 User Permissions
At User security level, the operator is restricted to a small group of parameters.
Important: Only Supervisor and Teklogix level passwords can change the
values of the User options.
Screen Switch
When set to “Y”, the operator can use the “Split screen” parameter to toggle
between screens when multiple applications are running on the 8525/8530. Refer to
“Split Screen” on page 194 for details about using this function.
Font Change
When “Font Change” is set to “Y”, operators at the User level can change the font
size of their 8525/8530s.
Exit
If this parameter is set to “Y”, an operator with user level security can exit Tekterm
by pressing [ALT] [F4]. If “Exit” is set to “N”, the operator cannot exit Tekterm.
6.17.5 Auto Start
“Auto Start” determines whether or not Tekterm is automatically launched when the
8525/8530 is reset. If this parameter is set to “N”, Tekterm will not be launched
when the vehicle-mount resets.
Screen Switch Y Y/N
Font Change Y Y/N
Exit N Y/N
User Permissions
04
Range