User manual

Chapter 6: Tekterm Application
Displaying The Unicode™ Pop-up Window
198
Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual
You can create up to 20 Unicode™ characters in the custom characters table.
To create a Unicode™ value:
• Replace the 0000 value with a hex value that represents the Unicode™
character you want to use.
• Press the [DOWN] arrow key to accept the value and move the cursor to the
next field.
When you have finished creating the Unicode™ characters you want to use:
• Press [F4] to save your changes.
• Reset the 8525/8530 – press and hold down the [ENTER] and [BLUE] key
simultaneously for a minimum of six seconds.
6.19.2.2 Displaying The Unicode™ Pop-up Window
The Unicode™ values you create are stored in a pop-up window that you can access
from any application.
To display the pop-up window within any application:
• Press [CTRL] [ALT] [A].
Note: Unicode™ characters that cannot be displayed on your screen with the font
you are currently using are displayed as rectangles in the pop-up window.
(See the sample menu on page 198.) However, the actual Unicode™ value
you created will be sent to the host.
• Use the [LEFT] or [RIGHT] arrow key to position the cursor on the
Unicode™ value you want to use, and press [ENTER].
To close the pop-up menu when you’re done:
• Press the [ESC] key.
Select item with arrow keys.
Press ENTER when done.
Press ESC to cancel.