User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 203

Chapter 6: Tekterm Application

Host Conn

Host

This parameter is used to assign a host IP address using the format ###.###.###.###

or a host name if DNS is used.

Port

“Port” specifies the 9010t (TCP Direct) or Telnet port number. The default 9010t

port number assigned is 9999, the maximum allowable value. The default Telnet

port number assigned is 23 with a maximum allowable value of 32767.

Terminal Type

This parameter allows the 8525/8530 to perform its own emulation (as opposed to

the controller). The value assigned to this parameter informs the host of the terminal

type the session is emulating.

ENTER Pmpt

This string indicates that the 8525/8530 is waiting for the user to press [ENTER] at

the time of connection.

ESC Prompt

This string indicates that the user can press the [ESC] key to terminate a connection

attempt before the connection is established.

Auto Login

The “Auto Login” parameters are used to define whether or not the 8525/8530 will

attempt to log in automatically.

The Auto Login sequence is as follows:

1. Host sends “Login Prompt”.

2. 8525/8530 responds with “Login”.

3. Host sends “Password Prompt”.

Password Prompt word: see text

Password see text

Password Echo Y Y/N

Range

Auto Login