User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 207
Chapter 6: Tekterm Application
Screen
Default font
This parameter determines the default font that appears when the 8525/8530
memory is reset.
• Use the [RIGHT] or [LEFT] arrow key to scroll through the available
options.
80-col. font & 132-col. font
These parameters are used to set the font size on the screen if the default font is not
acceptable. An escape sequence must be sent from the host before a vehicle-mount
can switch to either 80-col. font or 132-col. font.
• Use the [RIGHT] or [LEFT] arrow keys to scroll through the size options
for these parameters.
Video
The possible attributes for these parameters are: “BLNK” (blink), “ULIN”
(underline), “REV” (reverse), and “NONE” (normal).
Bold
This parameter specifies the actual video attributes to be assigned to fields created
with the “Bold” ANSI attribute.
Blink
This parameter specifies the actual video attributes to be assigned to fields
created with the “Blink” ANSI attribute.
Reverse
This parameter specifies the actual video attributes to be assigned to fields created
with the “Reverse” ANSI attribute.
Bold NONE see text
Blink BLNK see text
Reverse REV see text
Underline ULIN see text
06
Video Range