User manual

Psion Teklogix 8525/8530 Vehicle-Mount Computer User Manual 209

Chapter 6: Tekterm Application

Xmit Modes

Foreground And Background

When “Colour Override” is set to ‘Y’, the colours chosen in this menu are displayed

in the ANSI sessions. These colour settings will override the “Default Colours” set

from within the “View Manager” menu. Refer to “Default Colours” on page 199

for details.

The allowable values are: Red, Green, Yellow, Blue, Magenta, Cyan, White and Black.

6.20.1.3 Xmit Modes

Xmit Count

This parameter determines how many characters from the keyboard or scanner are

buffered by the 8525/8530 before being transmitted to the host. If 0 (zero) is

selected, the vehicle-mount transmits only according to the “Xmit Wait” parameter.

If the ANSI block mode features are used, this parameter should be set to 99.

Note: If the 8525/8530 is not in local edit mode, the [ENTER], arrow, [CTRL], and

function keys cause an immediate radio transmission regardless of the “Xmit

Count” parameter setting.

Xmit Wait

This parameter determines the length of time the 8525/8530 collects keystrokes

before transmitting them to the host. This value is specified in increments of one

10th of a second (i.e., a value of 10 represents 1 second). If 0 (zero) is selected, the

computer transmits only according to the “Xmit Count” parameter.

Note: If the 8525/8530 is not in local edit mode, the [ENTER], arrow, [CTRL], and

function keys cause an immediate radio transmission regardless of the “Xmit

Wait” parameter setting.

Xmit Count 99 0..99

Xmit Wait 1 0..999

Dev Attr [ ? 62 ; 1;2;6c see text

Auto-Answer see text

7 bit Y Y/N

Block Mode » see text

Xmit Modes

Range